• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.517-522
• /
• 2004

In this paper, we have analyzed the performance enhancement of Orthogonal Frequency Division Multiplexing/Quadrature Phase Shift Keying Modulation-Digital Microwave Radio(OFDM/QPSK-DMR) system using Band Limited-Pulse Shaping Filter(BL-PSF) over microwave channel environments. For performance enhancement, the one-tap adaptive equalizer is adopted in the OFDM/QPSK-DMR system and than both BER and signature curve performance are compared with those of single carrier DMR system. Computer simulations confirm that the OFDM/QPSK-DMR system using 16 sub-carrier increase the fade margin about 2 dB over microwave channel environments and that of performance using one-tap adaptive equalizer is highly increased the fade margin as the number of sub-carriers is larger.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.274-275
• /
• 2006

A linear ultrasonic motor was designed by a combination of the longitudinal and bending mode. Linear ultrasonic motors are based on an elliptical motion on the surface of elastic body, such as bar or plates. The corresponding eigen-mode of one resonance frequency can be excited twice at the same time with a phase shift of 90 degrees in space and time. That is excite symmetric and anti-symmetric modes. Then it determines the thrust and speed of the motor. Linear ultrasonic motors are investigated experimentally in according to be fabricated a general classification to motor structure and material characteristic. There was the first to simulate as use of finite element analysis ANSYS 9.0. The AL-T2W8-ARM14-LEG18-ANGLE80 motor has a maxim efficiency 17 [%] under the speed 0.14 [m/s], thrust 345 [gf] and preload 280 [gf], operating frequency is 57.6 [kHz].

• ETRI Journal
• /
• v.41 no.3
• /
• pp.308-315
• /
• 2019

Due to its high spectrum efficiency, 64-amplitude phase-shift keying (64-APSK) is one of the primary technologies used in deep space communications and digital video broadcasting through satellite-second generation. However, 64-APSK suffers from considerable computational complexity because of the de-mapping method that it employs. In this study, a low-complexity de-mapping method for (4 + 12 + 20 + 28) 64-APSK is proposed in which we take full advantage of the symmetric characteristics of each symbol mapping. Moreover, we map the detected symbol to the first quadrant and then divide the region in this first quadrant into several partitions to simplify the formula. Theoretical analysis shows that the proposed method requires no operation of exponents and logarithms and involves only multiplication, addition, subtraction, and judgment. Simulation results validate that the time consumption is dramatically decreased with limited degradation of bit error rate performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.5
• /
• pp.1503-1515
• /
• 2023

This paper considers the jointly active and passive beamforming design in the IRS-aided MISO downlink vehicle communication system where both V2I and V2V communication paradigms coexist. We formulate the problem as an optimization problem aiming to minimize the total transmit power of the base station subject to SINR requirements of both V2I and V2V users, total transmit power of base station and IRS's phase shift constraints. To deal with this non-convex problem, we propose a method which can alternately optimize the active beamforming at the base station and the passive beamforming at the IRS. By using first-order Taylor expansion, matrix analysis theory and penalized convex-concave process method, the non-convex optimization problem with coupled variables is converted into two decoupled convex sub-problems. The simulation results show that the proposed alternate optimization algorithm can significantly decrease the total transmit power of the vehicle base station.

• Structural Engineering and Mechanics
• /
• v.88 no.4
• /
• pp.323-334
• /
• 2023

The submerged floating tunnel (SFT) infrastructure has been regarded as an emerging technology that efficiently and safely connects land and islands. The SFT route problem is an essential part of the SFT planning and design phase, with significant impacts on the surrounding environment. This study aims to develop an optimization model considering transportation and structure factors. The SFT routing problem was optimized based on two objective functions, i.e., minimizing total travel time and cumulative strains, using NSGA-II. The proposed model was applied to the section from Mokpo to Jeju Island using road network and wave observation data. As a result of the proposed model, a Pareto optimum curve was obtained, showing a negative correlation between the total travel time and cumulative strain. Based on the inflection points on the Pareto optimum curve, four optimal SFT routes were selected and compared to identify the pros and cons. The travel time savings of the four selected alternatives were estimated to range from 9.9% to 10.5% compared to the non-implemented scenario. In terms of demand, there was a substantial shift in the number of travel and freight trips from airways to railways and roadways. Cumulative strain, calculated based on SFT distance, support structure, and wave energy, was found to be low when the route passed through small islands. The proposed model helps decision-making in the planning and design phases of SFT projects, ultimately contributing to the progress of a safe, efficient, and sustainable SFT infrastructure.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.368-372
• /
• 2006

The cobalt titanate, $CoTiO_3$ nanoparticles have been prepared by calcinations of precursor obtained from a mixture of $TiO_2$ and $Co(OH)_2$ in aqueous cetyltrimethylammonium bromide (CTAB) solution. The nanoparticles were investigated with X-ray powder diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and thermogravimetric/differential thermal analysis (TGA/DTA) to determine the crystallite size and the phase composition. The spectroscopic characterizations of these nanoparticles were also done with UV-Vis spectroscopy and FT-Raman spectroscopy. XRD patterns show that $CoTiO_3$ phase was formed at calcinations temperature above 600 ${^{\circ}C}$. UV-Vis absorption spectra indicate that the $CoTiO_3$ nanoparticles have significant red shift to the visible region (400-700 nm) with $\lambda_{max}$ = 500 nm compared to pure $TiO_2$ powder ($\lambda_{max}$ = 320 nm). The new absorption peaks (absorption at 696, 604, 520, 478,456, 383, 336, 267, 238, 208 $c m ^{-1}$), which were not appeared in FT-Raman spectra of P-25, also confirm the formation of Ti-O-Co bonds at above 600 ${^{\circ}C}$ and just not the mixtures of titanium dioxide with cobalt oxides.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.5
• /
• pp.88-98
• /
• 1999

A refractive index modulated (RIM) DFB laser, in which the refractive index of a center region of the upper cladding layer comprising the grating region is different from that of side regions, is proposed to obtain and effective ${\lambda}$/4 phase shift in the center region. Since the coupling coefficient of a center region in a RIM-DFB laser is larger than that of side regions, a RIM-DFB laser has the effect of a distributed coupling coefficient. Simulation results show that RIM-DFB lasers have better operation characteristics - more uniform photon density profile, less SHB effect, and better single mode operation at high injection currents - compared to those of ${\lambda}$/4 phase-shifted DFB lasers and CPM-DFB lasers. In addition, the effect of the center region on the above threshold characteristics of a RIM-DFB laser is investigated.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.71-76
• /
• 2000

A TC-16ADPSK scheme for transmitting different kinds of information simultaneously is proposed in this paper. The scheme is designed for simultaneously transmitting two kinds of Information on one channel. In signal mapping, a data of two kinds of information is used to phase modulation on Star-16APSK constellation and the other to amplitude modulation. In detection, each data independently recovers from mixing signal on each detector Therefore, we can transmit two kinds of Information on one channel can be transmitted efficiently. BER performance of the proposed scheme is analyzed on AWGN channel and Rayleigh fading channels on a computer with Matlab communication toolbox. On same SNR, the Gray code mapping has more 0.5-1.5dB coding gains than Ungerboeck's code mapping gains.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.4
• /
• pp.565-572
• /
• 1994

According to the classification of dental arch form and the analysis of patterns of chewing movement, the patterns of chewing movement in each group were evaluated and compared with those of the normal group. Results were summarized as follows ; 1. Opening phase in chewing movement In the group which the maxillary second molar positionsbuccal side, the chewing patterns which have the Vertical Guide Openings in frontal plane, the Posterior Guide Openings in hjorizontal plane were observed. In the group which the maxillary premolars position lingual side, the chewing paterns which have the Protrusive Shift Openings in horizontal plane and sagittal plane were observed. 2. Closing phase in chewing movement. In each group except for the normal group, the chewing patterns which have the Concave Closure in frontal plane and in Horizontal plane were observed. In the group which the maxillary premolars position buccal side, the chewing patterns which have the Lateral Guide Closure in frontal plane and in horizontal plane, the Vertical Guide Closre in sagittal plane were observed: From the results, as the characteristics of the dental arch form have appeared in chewing movement, the close relationships were found between dental arch form and chewing movement. It is suggested that the evaluation of dental arch form is effective in the diagnosis of function of stomatognathic system.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.4
• /
• pp.178-183
• /
• 2021

The temperature and frequency dependence of the dielectric constant of the BaTiO₃ substituted with two types of donor dopants, Nb⁵⁺ and Ta⁵⁺, respectively, were compared and analyzed. Dielectric specimens of four specific compositions, Ba_0.95Nb_0.05TiO₃, Ba_0.90Nb_0.10TiO₃, Ba_0.95Ta_0.05TiO₃, and Ba_0.90Ta_0.010TiO₃ were prepared by calcining at 1100 ℃ and sintering at 1300 ℃ to have a perovskite structure to measure capacitance. XRD and SEM analysis were used to observe the structure, with particular focus on the integration into the Nb⁵⁺ and Ta⁵⁺ substituted BaTiO₃ crystal lattice. X-ray diffraction peaks in the (200) and (002) planes were observed between 45.10° and 45.45° of the BaTiO₃ solid solution substituted with different fractions of Nb⁵⁺ and Ta⁵⁺. The dielectric properties were analyzed and the relationship between the properties and structure of the substituted BaTiO₃ was established. The fine particles and high density of the substituted BaTiO₃ were maintained like pure BaTiO₃, and in particular, a shift toward the low temperature side of the phase transition temperature range was clearly found, unlike pure BaTiO₃. In addition, the phase transition at a temperature higher than the Curie temperature relatively satisfies the modified Curie-Weiss law.