• Journal of Distribution Science
• /
• v.11 no.8
• /
• pp.25-30
• /
• 2013

Purpose - Foodservices have grown to over 60% of the franchise industry. However, despite reaching this high level, the foodservice franchise industry is experiencing severe ups and downs. While factors such as expansion by franchises and the entry of large multinational firms are causing this imbalance, the more serious problem faced by franchisees is the lack of know-how and correct operating procedures. Franchise headquarters should advise franchisees on important matters such as food ingredients, interior design, tableware, and fixtures. However, even though franchise headquarters have the ability to impart such management know-how, this is often a neglected area. Research design, data and methodology - This study was conducted in an industrial environment to present suitable competitive alternatives for foodservice franchises. Empirical analysis was conducted using a sample of 232 people with experience in targeting customers. The main purpose of this study is not to identify and analyze the factors affecting customer satisfaction. Customers of the Food Service Industry to invite contacts until departure for the service flow by identifying the expectations and allow this area by analyzing the resulting measures to enhance the competitiveness has presented. Results - Actual results contact factors affecting the quality of service on customer satisfaction was a significant influence. However, the end of this analysis, the actual customer satisfaction directly affects the quality of service that is only important factor can commit mistakes. Relatively large impact on customer satisfaction, which is relatively independent of the quality factor should be a review of zone of tolerance. In this study, eating phase relative to contact the service customer satisfaction was the most influential. The results, however, zone of tolerance for an area in the waiting and ordering dissatisfaction factors are appearing. And in the course of these services outside the zone of tolerance area is unsatisfactory evaluation is being done. Conclusions - After all, Foodservice, the contact service management for zone of tolerance the top priority should be can be seen. Foodservice contact first in the case of service quality factors caused by the continuous flow of services, so this step-by-step identification needs to be clearer. This, of course, to distinguish between the actual per unit of activity appears to be more difficult to follow, for it seems to need a lot of future complementary. Next is the assessment of customer service quality. Customers remember the experience for the services of a real contact through the assessment and service evaluation clearly emerge as the expected level can be difficult. However, this situation is controlled by the test method cannot be avoided unless there is no limit to the number of leave. Despite these limitations, the next step to contact a service evaluation and analysis have to continue to refine and thereby franchisees for the operation of the store in terms of practical know-how required to provide to the office believe.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.1
• /
• pp.5-11
• /
• 2010

The objective of this study is to evaluate the effect of operational parameters such as rotation speed and vibrating milling time for the fabrication of photocatalytic $TiO_2$ thin film using aerosol deposition methods. $TiO_2$ powders produced in the range of 1,000-3,000 rpm of rotation speed of centrifugal separator are ineffective on the fabrication of $TiO_2$ thin film by aerosol deposition due to the problem of nozzle powder jam. $TiO_2$ powders controlled by vibrating milling had about 420 nm of average diameter after 2 hr of vibrating milling time. The result of XRD analysis indicated that $TiO_2$ powders had a anatase phase. Vibrating milling methods was considered to be an effective pre-treatment process for $TiO_2$ powder control. Consequently $TiO_2$ photocatalytic thin film with dispersion of anatase crystallites controled by vibrating milling was successfully fabricated by aerosol deposition. The permeation flux of $TiO_2$ photocatalytic thin film with the immobilized $TiO_2$ powder was higher than that of suspended $TiO_2$ powder. Therefore, $TiO_2$ photocatalytic thin film promises to be one of the effective methods for enhancing filtration performance for the treatment of organic pollutants.

• Tuberculosis and Respiratory Diseases
• /
• v.83 no.1
• /
• pp.96-103
• /
• 2020

Background: The aim of this study was to investigate the effectiveness of intravenous isoniazid (H) and ethambutol (E) administered in patients with new sputum positive drug-susceptible pulmonary tuberculosis (TB) with tuberculous meningoencephalitis (TM) and human immunodeficiency virus (HIV) co-infection in the intensive phase of treatment. Methods: Fifty-four patients with TB/TM and HIV co-infection were enrolled for this study. Group 1 comprised of 23 patients treated with E and H intravenously, while rifampicin and pyrazinamide were prescribed orally. Group 2 consisted of 31 patients treated with the first-line anti-TB drugs orally. The concentrations of H and E in blood serum were detected using a chromatographic method. Results: A significant improvement in the clinical symptoms and X-ray signs in patients treated intravenously with H and E was observed and compared to group 2. The sputum Mycobacterium tuberculosis positivity was observed during the second month of the treatment in 25.0% of patients from group 1 and 76.1% of the patients from the control group (p=0.003). In addition, nine patients (39.1%) died up to 6 months when H and E were prescribed intravenously compared with 22 (70.9%) in group 2 (p=0.023). Conclusion: In TB/TM with HIV, the intravenous H and E treatment was more effective than oral H and E treatment at 2 months of intensive treatment in sputum conversion as well as in clinical improvement, accompanied by significantly higher mean serum concentrations. In addition, the mortality rate was lower in intravenous H and E treatment compared to oral treatment.

• Journal of Life Science
• /
• v.27 no.1
• /
• pp.44-49
• /
• 2017

Natural anti-oxidative compounds have important disease prevention and food preservation properties, in addition to anti-bacterial, anti-inflammation, anti-cancer, and skin whitening effects. High-performance liquid chromatography (HPLC), with an ultra vilolet (UV) detector coupled to a reverse phase C18 column and an online measurement system for 1, 1-diphenyl-2-picryl hydrazyl (DPPH) radicals, was used to search for potent antioxidative compounds in crude extracts. The online HPLC-DPPH assay was then applied to confirm antioxidative compounds in water extracts from Radix of Pueraria lobata, Rhizoma of Zingiber officinale, Fructus of Chaenomeles sinensis, Cortex of Ulmus pumila, and Radix of Astragalus membranaceus. To determine the yields of the extracts, the Brix% of each extract solution was measured using a refractometer. When the relative DPPH radical scavenging ability values of the water extracts were compared with those of a positive control (ascorbic acid), the water extracts of P. lobata, C. sinensis, and U. pumila were 7.77%, 4.71%, and 4.19%, respectively. The results suggest that this method provides a useful assay for rapid measurement of DPPH radical scavenging abilities and conformation of antioxidative compounds in natural products. Moreover, it can reduce the time spent on the separation of active compounds from natural materials, such as medicinal plants, in addition to the use of reagents for separation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.5
• /
• pp.286-291
• /
• 2014

In this study, novel ultrasonic rotary motor of hexadecagon shape stator was proposed. Stator of the hexadecagon ultrasonic motor was composed of an elastic ring and ceramics. The elastic ring had sixteen sides and sixteen angular points. Eight ceramics were attached on the outer surface of the eight sides of the ring. When rotor of cylindrical shaft was inserted inside of the ring stator, central lines of the sixteen sides of the stator hold the shaft by the slight pressures(frictions). This slight pressure was a preload of the motor and it could be controlled by radius and thickness of the ring. When two sinusoidal voltages which have 90 degree phase difference were applied to each four ceramics, elliptical displacements of inner surface of the ring were obtained. These elliptical displacements of the inner surface rotated the shaft rotor through the frictions. The proposed hexadecagon ultrasonic motor was designed and analyzed by using the finite element method (FEM), depending on materials of the elastic ring. Based on the FEM results, one model of motor which showed maximum displacement at contact points was chosen and fabricated. And characteristics of the motor were compared with simulated results. When the motor was fabricated with these results, EL20ET0.5CT0.5CW2 model showed 115[rpm] speed about input voltage of 60[Vrms] at 65.6[kHz]. And the maximum torque of 6[gfcm] was obtained. From these results, the hexadecagon shaped ultrasonic motor can be used to actuator for optical device which needs detailed position control. Also it can be used to medical and portable device by reducing size and weight.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.1
• /
• pp.65-71
• /
• 2009

The aim of the present study was to evaluate the bioequivalence of two domperidone maleate tablets, Motilium-$M^{(R)}$ Tablet (Janssen Korea Ltd., reference product) and $Toriem^{(R)}$ Tablet (Daewon Pharm. Co., Ltd., test product). Domperidone was extracted by liquid-liquid extraction using tert-butyl methyl ether and separated in less than 3 min on $C_{18}$ reverse-phase column using an isocratic elution. A tandem mass spectrometer, as detector, was used for quantitative analysis in positive mode by a multiple reaction monitoring mode to monitor the m/z $426.1{\rightarrow}119.1$ and the m/z $837.4{\rightarrow}158.2$ transitions for domperidone and the internal standard (roxithromycin), respectively. Calibration curves, from $0.05{\sim}50$ ng/mL of domperidone, showed correlation coefficients (r) higher than 0.9941. Intra day and inter day precision (C.V. %) for quality control were ranged from 10.04 to 16.09% and from 10.87 to 18.69%, respectively. The lower limit of quantification (LLOQ) of domperidone was 0.05 ng/mL. The method described is precise and sensitive and has been successfully applied to the study of bioequivalence of domperidone in 24 healthy Korean volunteers. Twenty-four healthy male Korean volunteers received a single dose of each medicine ($2{\times}12.72\;mg$ domperidone maleate) in a $2{\times}2$ crossover study. There was a one-week washout period between the doses. Plasma concentrations of domperidone were monitored for over a period of 24 hr after the administration. $AUC_{0-t}$ (the area under the plasma concentration-time curve) was calculated by the linear trapezoidal rule. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma concentration-time data. The 90% confidence intervals for the log transformed data were within acceptable range of log 0.8 to log 1.25 (e.g., $log\;0.92{\sim}log\;1.05$ for $AUC_{0-t}$, $log\;0.81{\sim}log\;1.05$ for $C_{max}$). The major parameters, $AUC_{0-t}$ and $C_{max}$ met the criteria of KFDA for bioequivalence indicating that $Toriem^{(R)}$ tablet is bioequivalent to Motilium-$M^{(R)}$ tablet.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.6
• /
• pp.443-448
• /
• 2005

Objective: A variety of genetic alterations in human glioblastoma comprises signal transduction and cell cycle arrest control of cellular processes. Subtractive hybridization is potentially a faster method for identifying differentially expressed genes associated with a particular disease state. Using the technique of subtraction, we isolated novel genes that are overexpressed in glioblastoma tissue as compared to normal brain tissue. Methods: We evaluated the differential expression of genes in each of hybridizing tester and driver cDNAs to digested 130 clones. After sequencing of 130 clones and homology search, this study performed to determine mRNA expression of the unknown gene, "clone 47", in brain tissue, glioblasoma, and several cancer cell lines by reverse transcription-polymerase chain reaction (RT-PCR). To test the time course for Go-phase arrest, serum stimulation and expression at various times for RT-PCR performed. Results: We identified 23 novel genes by BLAST of the digested 130 clones. The expressions of "clone 47" mRNA of glioblastoma and several cancer lines were significantly higher than normal brain tissues and several normal cell lines. We confirmed the mRNA expression of "clone 47" was up-regulation for $0.5{\sim}1hr$ of WI-38 cell differentiation. Conclusion: The novel gene, "Clone 47" is upregulated in glioblastoma tissue and several cancer cell lines. This gene is time dependent activation during time course of serum stimulation. This result suggests that "clone 47" playa role in brain tumorigenesis and the activation of this "clone 47" may be necessary for the development of cancer.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.1
• /
• pp.141-152
• /
• 2011

The market volume of urban regeneration projects has steadily increased, thereby mixed-use development also shows significant market growth. However, previous researches on urban regeneration mainly deduced suggestions and plans for institution improvement based on comparison between projects implemented the inside and outside of the country. Whereas, researches on project management closely related to project success were limited, particularly in performance management. Accordingly, this research aims at developing a program performance management framework for public clients so as to succeed mixed-use development projects. Through extensive literature review and expert interview, this research developed performance indices for diverse facilities, risk management framework and integrating method of program performance score. The proposed framework is able to consider total life cycle from basic planning to maintenance phase and to check real-time performance level. Moreover, risk management framework can periodically assess and control the level of inherent risks within performance indices. The results can contribute to improve existing performance management practices and be basis for a web-based system developed in future.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.2
• /
• pp.363-374
• /
• 2015

Instrumentation and control(I&C) system has been mainly designed and operated based on analog technologies in existing Nuclear Power Plants(NPPs). However, As the development of Information Technology(IT), digital technologies are gradually being adopted in newly built NPPs. I&C System based on digital technologies has many advantages but it is vulnerable to cyber threat. For this reason, cyber threat adversely affects on safety and reliability of I&C system as well as the entire NPPs. Therefore, the software equipped to NPPs should be developed with cyber security attributes from the initiation phase of software development life cycle. Moreover through cyber security assessment, the degree of confidence concerning cyber security should be measured and if managerial, technical and operational work measures are implemented as intended should be reviewed in order to protect the I&C systems and information. Currently the overall cyber security program, including cyber security assessment, is not established on I&C systems. In this paper, we propose cyber security assessment methods in the Software Development Life Cycle by drawing cyber security activities and assessment items based on regulatory guides and standard technologies concerned with NPPs.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.11-14
• /
• 2012

The AlGaN layer has direct wide bandgaps ranging from 3.4 to 6.2 eV. Nowadays, it is becoming more important to fabricate optical devices in an UV region for the many applications. The high quality AlGaN layer is necessary to establish the UV optical devices. However, the growth of AlGaN layer on GaN layer is difficult due to the lattice mismatch and difference thermal expansion coefficient between GaN layer and AlGaN layer. In this paper, we attempted to grow the LED structure on GaN template by mixed-source HVPE method with multi-sliding boat system. We tried to find the optical and lattice transition of active layer by control the Al content in mixed-source. For the growth of epi layer, the HCl and $NH_3$ gas were flowed over the mixed-source and the carrier gas was $N_2$. The temperature of source zone and growth zone was stabled at 900 and $1090^{\circ}C$, respectively. After the growth, we performed the x-ray diffraction (XRD) and electro luminescence (EL) measurement.