• 한국통신학회논문지
• /
• 제32권12C호
• /
• pp.1142-1148
• /
• 2007

본 논문에서는 OFDM (Orthogonal Frequency Division Multiplexing) 시스템에서 전송 신호의 PAPR(Peak-to-Average Power Ratio)을 효과적으로 감소시키기 위한 피크 신호 관찰 기반의 적응적 SLM (Adaptive Selective Mapping; ASLM) 기법을 제안한다. 제안 기법은 기존 SLM 방법에서의 복잡도 문제를 개선하기 위해, 매 OFDM 심벌마다 IFFT (Inverse Fast Fourier Transform) 결과에 대한 피크 신호 조정, 피크 조정된 신호의 FFT 결과와 원래 OFDM 심벌간의 부반송파별 전력차 비교를 통한 직교 부호 선택, 선택된 직교 부호만을 이용한 전형적인 SLM 과정의 3단계로 구성된다. 모의실험 결과, 제안된 ASLM 기법은 우수한 PAPR 감소 성능을 유지하면서도 기존 SLM 방법에 비해 훨씬 적은 IFFT 연산 및 PAPR 계산 횟수를 요구함을 확인하였다.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.5269-5279
• /
• 2014

SMT에 의한 PCB 조립에서 발생하는 가장 큰 불량의 원인은 솔더의 도포이다. 기존의 솔더 도포의 검사 방법은 신뢰도가 낮고 검사 속도가 느리며 가격이 높다. 본 논문에서는 2차원 영상을 추가로 획득하지 않고, 3차원 형상정보에서 PCB 위의 솔더영역을 검출하고 높이를 계산하는 방법을 제안한다. 솔더영역은 3차원 형상정보에서 측정점과 PCB 전체의 위상평균의 상대적 위상에 의하여 추출한다. 또 솔더영역의 높이를 신뢰도 높게 측정하기 위하여, 솔더영역의 높이는 반복능과 신뢰도를 적용한 측정점들의 위상평균으로 계산된다. 제안한 방법에 대한 측정실험 결과 검사시간에서 17.5%, 높이계산에서 29%의 반복능 향상을 보였으며, SPI장비 가격 인하 및 검사시간 단축 효과가 있다.

• 한국재료학회지
• /
• 제23권10호
• /
• pp.543-549
• /
• 2013

The purpose of this paper was to investigate the effect of a high-energy milling (HEM) process on the particle morphology and the correlation between a thermal treatment and tetragonal/monoclinic nanostructured zirconia powders obtained by a precipitation process. To eliminate chloride residue ions from hydrous zirconia, a modified washing method was used. It was found that the used washing method was effective in removing the chloride from the precipitated gel. In order to investigate the effect of a pre-milling process on the particle morphology of the precipitate, dried $Zr(OH)_4$ was milled using a HEM machine with distilled water. The particle size of the $Zr(OH)_4$ powder exposed to HEM reduced to 100~150 nm, whereas that of fresh $Zr(OH)_4$ powder without a pre-milling process had a large and irregular size of 100 nm~1.5 ${\mu}m$. Additionally, modified heat treatment process was proposed to achieve nano-sized zirconia having a pure monoclinic phase. It was evident that two-step calcining process was effective in perfectly eliminating the tetragonal phase, having a small average particle of ~100 nm with good uniformity compared to the sample calcined by a single-step process, showing a large average particle size of ~300 nm with an irregular particle shape and a broad particle size distribution. The modified method is considered to be a promising process for nano-sized zirconia having a fully monoclinic phase.

• 한국전자파학회논문지
• /
• 제17권11호
• /
• pp.1065-1072
• /
• 2006

OFDM(Orthogonal Frequency Division Multiplexing) 시스템은 다수 부반송파들의 중첩 현상으로 인해 PAPR (Peak-to-Average Power Ratio) 문제를 가진다. 기존의 제안된 GA-SPW(Genentic-Sub-block Phase Weighting) 기법은 하나의 OFDM 심볼에서 부 블록 수를 증가시켜 PAPR 감소 성능을 향상시키고, 부 블록 수에 따라 지수적으로 증가하는 위상 탐색량을 유전자 알고리즘을 이용하여 개체군과 세대수에 고정시켜 감소시켰다. 본 논문에서는 더 적은 탐색량으로 주어진 부 블록에서 최적에 가까운 PAPR 감소 성능을 얻기 위해 기존의 GA-SPW 기법에 새로이 변형된 유전자 알고리즘을 적용한다. 제안된 기법의 성능과 계산량의 우수성을 모든 부 블록과 위상수에 따른 모든 탐색을 하는 일반적인 탐색 방법, iterative flipping그리고 기존의 GA-SPW와 시뮬레이션과 결과의 분석을 통하여 나타내었다.

• 방송공학회논문지
• /
• 제17권1호
• /
• pp.26-36
• /
• 2012

영상에 포함된 객체의 형태는 내용 기반 영상검색에 있어서 중요한 정보를 가지고 있기 때문에, 이를 이용하여 영상을 검색하는 방법들이 활발히 연구되어 왔다. 그중에서도 최근에 제안된 저니키 모멘트의 위상과 크기를 이용하는 회전불변 서술자(IZMD: Invariant Zernike moment descriptor)을 이용한 영상 검색 방법은 기존의 크기 정보만을 이용한 저니키 모멘트 서술자보다 높은 영상 검색 성능을 보인다. 본 논문에서는 IZMD를 이용한 방법 보다 향상된 영상 검색 성능을 얻기 위해서 ART(Angular Radial Transform)의 크기와 위상을 이용한 회전 불변 특징 서술자(IARTD: Invariant Angular Radial Transform Descriptor)와 이를 이용해서 영상을 정합하는 방법을 제안한다. IARTD는 ART 기저함수의 특성을 이용해서 정렬된 ART 계수의 위상과 크기로 구성된 특징벡터이다. 영상의 검색은 두 IARTD의 크기차이와 위상차이의 곱을 이용하여 정의된 거리 계산 방법을 이용해서 수행한다. MPEG-7 데이터셋을 이용한 실험 결과, 제안하는 방법의 평균 BEP(Bull's Eye performance)는 0.5806으로서, ARTD나 IZMD를 이용한 영상 검색 결과의 평균 BEP 0.3574, 0.4234보다 우수한 검색 성능을 제공하는 것을 확인하였다.

• 한국유체기계학회 논문집
• /
• 제8권4호
• /
• pp.14-19
• /
• 2005

Average Bi-directional flow tube was suggested to measure single and two phase flow rate. Its working principle is similar with Pilot tube, however, it makes it possible to eliminate the cooling system which is normally needed to prevent from flashing in the pressure impulse line of Pilot tube when it is used in the depressurization condition. 3-dimensional steady state flow analyses using FLUENT 5.4 code were performed to validate the application of the average bi-directional flow tube in case of water and air flow. In this study, sensitivity studies have been performed to optimize the design features of the average bi-directional flow tube which can be applied for the various experimental conditions. For Re numbers above 1000, the k values are nearly constant regardless of the Re numbers and flow types and calculation results and experimental data coincides quite well. The current FLUENT calculation results suggest that linearity of the k values in various design features of the average BDFT is highly promising, which means that it is quite reasonable to select the typical design of the average BDFT for the convenience of the experimental conditions.

• Journal of Animal Science and Technology
• /
• 제56권3호
• /
• pp.10.1-10.7
• /
• 2014

An experiment was conducted to investigate the effects of dietary supplementation with citrus pulp, fish by-product, and Bacillus subtilis fermentation biomass on the growth performance, apparent total tract digestibility (ATTD) of nutrients, and fecal microflora of weanling pigs. A total of 180 weaned piglets (Landrace ${\times}$ Yorkshire ${\times}$ Duroc) were randomly allotted to three treatments on the basis of body weight (BW). There were six replicate pens in each treatment with 10 piglets per pen. Dietary treatments were corn-soybean meal-based basal diet supplemented with 0 (control), 2.5, and 5.0% citrus pulp, fish by-product, and B. subtilis fermentation biomass. The isocaloric and isoproteineous experimental diets were fed in mash form in two phases (d 0 ~ 14, phase I and d 15 ~ 28, phase II). Dietary treatments had significant linear effects on gain to feed ratio (G:F) in all periods, whereas significant linear effects on ATTD of dry matter (DM), gross energy (GE), and ash were only observed in phase I. Piglets fed diet supplemented with 5.0% citrus pulp, fish by-product, and B. subtilis fermentation biomass showed greater (p < 0.05) G:F (phase I, phase II, and overall) as well as ATTD of DM, GE, and ash (phase I) than pigs fed control diet. Dietary treatments also had significant linear effects on total anaerobic bacteria populations by d 14 and 28. In addition, piglets fed diet supplemented with 5.0% citrus pulp, fish by-product and B. subtilis fermentation biomass showed greater (p < 0.05) fecal total anaerobic bacteria populations (d 14 and 28) than pigs fed control diet. Dietary treatments had no significant effects (linear or quadratic) on average daily gain (ADG), average dial feed intake (ADFI; phase I, phase II, and overall), or fecal populations of Bifidobacterium spp., Clostridium spp., and coliforms (d 14 and 28). These results indicate that dietary supplementation with 5.0% citrus pulp, fish by-product, and B. subtilis fermentation biomass has the potential to improve the feed efficiency, nutrient digestibility, and fecal microflora of weanling pigs.

• Journal of Animal Science and Technology
• /
• 제52권3호
• /
• pp.205-212
• /
• 2010

Two experiments were conducted to study the effects of dietary protein level and phase feeding regimens on performance, carcass characteristics and pork quality in growing-finishing pigs. In both experiments, growing pigs (n=90; barrows; Landrace $\times$ Yorkshire $\times$ Duroc) were allotted to 3 treatments. Each treatment had 3 replicate pens comprising 10 pigs in each. In Exp. 1, pigs (average body weight $25.06{\pm}0.57\;kg$) were fed diets having low (17.50-14.50-12.51%), medium (19.49-17.50-13.87%) or high (22.47-19.49-16.36%) CP concentration (LP, MP and HP diets, respectively) diets during grower-finisher I-finisher II phases, respectively. Feeding of MP diet resulted in higher (P<0.05) ADG and better FCR than pigs fed LP diet. Pigs fed HP diet had lower (P<0.05) pork color and marbling score. Meat of pigs fed LP diet had higher (P<0.05) Thiobarbituric acid reactive substances (TBARS), while meat of pigs fed HP and LP diets had greater drip loss than pigs fed MP diet. In addition, meat from pigs fed LP diet was darker while meat of pigs fed HP and MP diets was paler and redder. In Exp. 2, pigs (average body weight $10.40{\pm}0.61\;kg$) were subjected during 126 days to three or four phase regimes of different duration. The treatments T1 and T2 were subjected to four phase feeding regimens (grower I, grower II, finisher I and finisher II) for 22, 42, 32 and 30 days (T1) and 40, 40, 25 and 21 days (T2), respectively, while T3 was subjected to three phase feeding regimen (grower I, grower II and finisherI) for 40, 56 and 30 days, respectively. Duration of phase feeding regimens had no effect (P>0.05) on the performance, carcass traits and meat quality of pigs. These results suggest that both high and low levels of CP have a negative effect on performance and pork quality; however, alterations in the phase feeding regimens do not have any discernible effect on the performance and pork quality in growing-finishing pigs.

• Water Engineering Research
• /
• 제5권2호
• /
• pp.55-68
• /
• 2004

The GLEAMS (Groundwater Loading Effects of Agricultural Management System, version 3.0) water quality model was used to predict hydrology and water quality and to evaluate the effects of soil types from a cattle-grazed pasture field of Bermuda-Rye grass rotation with poultry litter application as a fertilizer in North Alabama. The model was applied and evaluated by using four years (1999-2002) of field-measured data to compare the simulated results for the 2.71- ha Summerford watershed. $R^2$ values between observed and simulated runoff, sediment yields, TN, and TP were 0.91, 0.86, 0.95, and 0.69, respectively. EI (Efficiency Index) of these parameters were 0.86, 0.67, 0.70, and 0.48, respectively. The statistical parameters indicated that GLEAMS provided a reasonable estimation of the runoff, sediment yield, and nutrient losses at the studied watershed. The soil infiltration rates were compared with the rainfall events. Only high intensity rainfall events generated runoff from the watershed. The measured and predicted infiltration rates were higher during dry soil conditions than wet soil conditions. The ratio of runoff to precipitation was ranging from 2.2% to 8.8% with average of 4.3%. This shows that the project site had high infiltration and evapotranspiration which generated the low runoff. The ratio of runoff to precipitation according to soil types by the GLEAMS model appeared that Sa (Sequatchie fine sandy loam) soil type was higher and Wc (Waynesboro fine sandy loam, severely eroded rolling phase) soil type relatively lower than the weighted average of the soil types in the watershed. The model under-predicted runoff, sediment yields, TN, and TP in Wb (Waynesboro fine sandy loam, eroded undulating phase) and Wc soil types. General tendency of the predicted data was similar for all soil types. The model predicted the highest runoff in Sa soil type by 105% of the weighted average and the lowest runoff in Wc soil type by 87% of the weighted average

• 대한치과기공학회지
• /
• 제40권3호
• /
• pp.125-131
• /
• 2018

Purpose: Automatic dental prosthesis manufacturing process was accelerated by the spread of dental CAD / CAM system. The CAD / CAM system with milling alloys were needed supplement. So, sintered alloy blocks were introduced. In this study, we want to study sintered alloy block. And to evaluate the alloy block manufacture and alloy properties. Methods: The alloy powders were prepared by high pressure water dispersion method. The sintered alloy blocks were prepared by low temperature pressing method. Their components observation were EDX, and the alloy structure was observed by XRD. Results: Co-Cr alloy powders were observed to have a circle shape with an average diameter of about $100{\mu}m$ and a Ni-Cr alloy powder had a circle shape with an average diameter of about $50{\mu}m$. The Co-Cr alloy block is composed of Co (34.62 wt%), Cr (17.33 wt%), Mo (2.98 wt%), Si (0.36 wt%) and C (44.17 wt%). The Ni-Cr alloy powder was composed of Ni (40.29 wt%), Cr (19.37 wt%), Mo (3.53 wt%), Si (0.52 wt%) and C (33.18 wt%). The peak of the Co and CoCr peaks were observed in the CoCr alloy body by the means of XRD study. Cr2Ni3 of the peak was observed in the Ni-Cr alloy material. Conclusion : As a result, the following conclusions were obtained. 1. Prepared by high-pressure water-law Co-Cr alloy powder has an average diameter $100{\mu}m$, Ni-Cr alloy powder was found to have the form of sphere having an average diameter $50{\mu}m$. 2. Co-Cr alloy and Ni-Cr alloy block produced by low-temperature processing showed a certain ratio. 3. In the XRD study, Co phase appeared in Co-Cr alloy block after sintering. and Cr2Ni3 phase appeared in Ni-Cr alloy block after sintering.