• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.443-446
• /
• 2003

The vibration mode shape changed by the phase angle that can be controlled by phase-shifting ESPI system is discussed. For the phase-shifting ESPI experiment the stroboscopic illumination by using AOM(Acousto-Optic Modulator) is needed, and the initial phase angle can be adjusted by the program. The vibration mode shape is changed when the initial phase angle is changed. We examined the vibration mode shape change due to the initial phase angle change at each resonance frequency. Through this study, we found that in the vibration testing using phase-shilling ESPI the vibration mode shape is improved in the quality by adjusting exact phase angle and the error of the quantitative vibration analysis can be reduced.

• 전기학회논문지
• /
• 제56권11호
• /
• pp.1930-1936
• /
• 2007

According to previously published paper the phase advance angle is adopted to the BLDC motor drive with high speed. The report proposed describes the optimum algorism that phase current is in phase with the initial flat region of back EMF. This report studies the need of more leading phase advance angle compared with in phase concept between phase current and back EMF. In case of high reactance this report proposes the more phase advance angle than in phase. The test results more rms value of phase current and output power due to more phase advance angle than in phase. It will be helped the high power operation of BLDC motor at high speed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2070-2072
• /
• 2002

In this paper, advance angle control is described to drive an industrial low voltage SRM(Switched reluctance motor) for a forklift truck by changing velocity and torque. The high current SRM is designed and its phase resistance and phase inductance are very low to inject high current into the phase windings. In this reason, the current has to be built up in the increasing phase inductance part as soon as possible. Therefore, the phase switch must be turned on before the phase inductance increases, and this angle is called as the advance angle. We analyze the changes of the advance angle as its torque and velocity are changed in the real SRM driving experiment. And we propose the way to improve the SRM performance by using the advance angle control.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2127-2134
• /
• 2007

The simulation model has been already developed not for 7 phase but for 3 phase BLDC motor. It is necessary to develop a new simulation model of multi-phase BLDC motor including the phase delay angle especially in the high speed region. In this paper, the suitability of the proposed model is verified through the several computer simulations, and experimented results.

• 전력전자학회논문지
• /
• 제7권3호
• /
• pp.237-243
• /
• 2002

단상 위상각제어시스템의 경우 제어기의 구조상의 단순함과 저가격화로 인해 많은 노이즈가 발생함에도 불구하고 트라이액 교류 위상각제어기를 속도제어기로 사용하고 있다. 시판되는 진공청소기의 경우 트라이액의 위상각을 조절하여 속도를 제어하고 있는데 고조파전류의 발생을 최소화로 하기 위해서 속도의 선형성을 고려하지는 않고 제작하고 있는 경우가 대부분이다. 본 논문에서는 진공청소기용 위상각 제어기에 파라미터 추정에 의한 실제작 시스템으로 고조파가 많이 발생되는 특정 트라이액 트리거 위상각에서도 고조파전류가 효과적으로 감소되고 부수적으로 지연각이 없어지는 고조파전류 감쇠용 위상제어기의 설계 및 제작하여 실험을 통해 입증하였다.

• Journal of Power Electronics
• /
• 제8권4호
• /
• pp.332-344
• /
• 2008

High frequency AC (HFAC) power distribution systems delivering power through a high frequency AC link with sinusoidal voltage have the advantages of simple structure and high efficiency. In a multiple module system, where multiple resonant inverters are paralleled to the high frequency AC bus through connection inductors, it is necessary for the output voltage phase angles of the inverters be controlled so that the circulating current among the inverters be minimized. However, the phase angle of the resonant inverters output voltage can not be controlled with conventional phase shift modulation or pulse width modulation. The phase angle is a function of both the phase of the gating signals and the impedance of the resonant tank. In this paper, we proposed a pulse phase modulation (PPM) concept for the resonant inverters, so that the phase angle of the output voltage can be regulated. The PPM can be used to minimize the circulating current between the resonant inverters. The mechanisms of the phase angle control and the PPM were explained. The small signal model of a PPM controlled half-bridge resonant inverter was analyzed. The concept was verified in a half bridge resonant inverter with a series-parallel resonant tank. An HFAC power distribution system with two resonant inverters connected in parallel to a 500kHz, 28V AC bus was presented to demonstrate the applicability of the concept in a high frequency power distribution system.

• 조명전기설비학회논문지
• /
• 제12권1호
• /
• pp.26-34
• /
• 1998

본 연구에서는 복권형 하이브리드 스테핑 전동기의 Lead Angle에 따른 순시 상전류값의 변화를 보이고 이를 실험적으로 확인하였다. Lead Angle에 따른 순시 상전류값의 변화는 상권선이 여기된 시점에서의 회전자 위치에 대한 정보를 제공한다. 따라서 복권형 하이브리드 스테핑 전동기의 폐루프 운전을 위한 회전자 위치검출 방법으로서 전동기의 순시 상전류를 이용할 수 있음을 보였다. 복권형 하이브리드 스테핑 전동기의 모델링을 통해 Lead Angle 함수로 주어지는 순시 상전류 식을 제시하였으며, 컴퓨터 시뮬레이션을 통해 순시 상전류와 회전자 자극위치와의 관계를 도시하고 분석하였고, 상전압 인가후 $\pi/2$ 시점에서의 순시 상전류값을 측정하여 회전자 자극위치 정보를 얻을 수 있음을 실험적으로 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1149-1151
• /
• 2002

In this paper, an auxiliary winding driving system of single-phase induction motors is described. Starting charateristics variations are obtained by controlling the auxiliary winding voltage magnitude and phase angle, while the motor's main winding is directly connected to the local utility. A variable auxiliary winding voltage phase angle is shown to yield significant torque control, providing starting and braking torque. The analysis includes the determination of the relationship between the auxiliary winding voltage phase angle and the phase angle difference between the main and auxiliary winding current. The paper proposed for adjusting an auxiliary winding voltage magnitude and phase angle. Experimental results of motor's starting characteristics with using the DC-AMP and PWM inverter for auxiliary winding power supply are shown. The drive is tested using a dynamometer to experimentally verify the results of the theory.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.243-249
• /
• 2003

The characteristics of harmonic phase angles and phase angle differences contained in earthquake ground motions such as El Centre 1530 NS, Taftl 1952 NS, Hachinohe 1968 NS and Mexico 1985 are figured, which have been mostly overlooked in contrast with the importance placed on harmonic amplitudes. And, energy input spectrum of structures excited by such an earthquake motion is expressed with smoothed Fourier amplitude spectrum. In dynamic response analysis, there must be earthquake ground accelerations which contain the phase angle, the phase angle difference and energy input spectrum characteristics of the zone considered to be constructed building structures. To make clear the importance of phase angle differences, 4-earthquake ground motions are normalized by 200 gal and energy input spectrum characteristics of normalized 4-earthquake ground motions are compared.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.497-504
• /
• 2002

The characteristics of harmonic phase angles and phase angle differences contained in earthquake ground motions such as El Centre 1940 NS, Taft1 1952 NS, Hachinohe 1968 NS and Mexico 1985 are figured, which have been mostly overlooked in contrast with the importance placed on harmonic amplitudes. Recently, performance based design method is used for seismic design and seismic retrofitting, which needs nonlinear response analysis, there must be earthquake ground accelerations which contain the phase angle and the phase angle difference characteristics of the zone considered to be constructed building structures. To make clear the importance of phase angle differences, 4-earthquake ground motions are normalized by 200 gal and nonlinear response characteristics of normalized 4-earthquake ground motions are compared.