• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.23-28
• /
• 2008

We report refinement of crystalline boron by an attrition ball milling system and the superconducting properties of the $MgB_2$ pellets prepared from the refined boron. In this work, we have conducted the ball milling with only crystalline boron powder, in order to improve homogeneity and control the grain size of the $MgB_2$ that is formed from it. We observed that the crystalline responses in the ball-milled boron became broader and weaker when the ball-milling time was further increased. On the other hand, the $B_{2}O_{3}$ peak became stronger in the powders, resulting in an increase in the amount of MgO within the $MgB_2$ volume. The main reason for this is a greater oxygen uptake. From the perspective of the superconducting properties, however, the sample prepared from boron that was ball milled for 5 hours showed an improvement of critical current density ($J_c$), even with increased MgO phase, under an external magnetic field at 5 and 20 K.

• Asian-Australasian Journal of Animal Sciences
• /
• 제6권4호
• /
• pp.591-595
• /
• 1993

A trial involving 200 day-old 288 Shaver chicks in a randomized experimental design tested the effects of using diets based on local feed materials (LF). Commercial imported counterpart feeds (CF) served as control diets. Birds were raised from 0-6 w on Chick Starter feed, from 7-17 w on Pullet Developer feed and from 18 to 72 w on Layer feed. The results obtained indicated that there were no significant differences in the performance of birds fed LF and CF diets during the Chick Starter and Pullet Developer phases. During the Laying phase, there were also no differences in laying percentage, (66 vs 65) and in egg size (62 vs 63 g) between LF and CF diets. Feed cost was lower on LF diet had a better egg yolk colour score, (4 vs 1) than those fed on CF diet. Feed cost was lower on LF than CF diets and the feed cost for producing eggs was approximately 50 percent lower on LF compared to CF (P$ 0.06 vs P$ 0.12). It was concluded that the use of locally available feed resources produces comparable performance to that obtained using commercial imported feeds. Secondly, using local materials markedly reduces feed cost and cost of producing eggs.

• Archives of Pharmacal Research
• /
• 제21권3호
• /
• pp.291-297
• /
• 1998

Cop protein has been overexpressed in Escherichia coli using a T7 RNA polymerase system. Purification to apparent homogeneity was achieved by the sequential chromatography on ion exchange, affinity chromatography, and reverse phase high performance liquid chromatography system. The molecular weight of the purified Cop was estimated as 6.1 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). But the molecular mass of the native state Cop was shown to be 19 kDa by an analytical high performance size exclusion chromatography, suggesting a trimer-like structure in 50 mM Tris-HCI buffer (pH 7.5) containing 100 mM NaCl. Cop protein Was calculated to contain $39.1% {\alpha}-helix, 16.8% {\beta}-sheet$, 17.4% turn, and 26.8% random structure. The DNA binding property of Cop protein expressed in E. coli Was preserved during the expression and purification process. The isoelectric point of Cop was determined to be 9.0. The results of amino acid composition analysis and N-terminal amino acid sequencing of Cop showed that it has the same amino acid composition and N-terminal amino acid sequence as those deduced from its DNA sequence analysis, except for the partial removal of N-terminal methionine residue by methionyl-aminopeptidase in E. coli.

• 한국재료학회지
• /
• 제13권2호
• /
• pp.120-125
• /
• 2003

A low melting borosilicate glass frit was used as an adhesion promoter, which enables $MnWO_4$to be sintered with in a reasonable sintering temperature range ($800∼1000^{\circ}C$). The glass was evaluated for glass transition temperature ($Τ_{g}$ X) and thermal expansion coefficient($\alpha$). Mechanical property (Vickers hardness), grain growth, the comparison of lattice parameter and pore distribution of sintered $MnWO_4$ with the frit were methodically discussed. As sintering temperature increased, a typical liquid phase sintering showed the rapid grain growth and high densification of X$MnWO_4$grain, improvement of hardness (until $920^{\circ}C$) and different pore size distribution. Resistance of sintered $MnWO_4$varied from 450k$\Omega$ to 8.8M$\Omega$ under the measuring humidify ranging from 30 to 90%. Thus, the results will contribute to the application of glass frit containing sensor materials and their future use.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.939-950
• /
• 2015

A single-stage AC-AC converter has been designed for a wind energy conversion system (WECS) that eliminates multistage operation and DC-link filter elements, thus resolving size, weight, and reliability issues. A simple switching strategy is used to control the switches that changes the variable-frequency AC output of an electrical generator to a constant-frequency supply to feed into a distributed electrical load/grid. In addition, a modified random sinusoidal pulse width modulation (RSPWM) technique has been developed for the designed converter to make the overall system more efficient by increasing generating power capacity and reducing the effects of inter-harmonics and sub-harmonics generated in the WECS. The technique uses carrier and reference waves of variable switching frequency to calculate the firing angles of the switches of the converter so that the three-phase output voltage of the converter is very close to a sine wave with reduced THD. A comparison of the performance of the proposed RSPWM technique with the conventional SPWM demonstrated that the power generated by a turbine in the proposed approximately increased by 5% to 10% and THD reduces by 40% both in voltage and current with respect to conventional SPWM.

• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1025-1028
• /
• 2008

본 논문에서는 탄화수소가스의 기체상 열분해과정에서 생성되는 탄소나노입자의 성장을 온도의 변화에 따라 체계적으로 관찰하였다. 탄화수소가스의 열분해온도가 상승할수록 최종적 산물인 탄소나노입자의 생성율과 물리적 크기가 증가하는 것을 확인하였다. 하지만, 다양한 탄화수소가스 중에서 아세틸렌($C_2H_2$)과 에틸렌($C_2H_4$)의 열분해과정 비교 실험 결과 탄소나노입자 생성률이 큰 차이를 보임을 관찰하게 되었고 이것은 탄화수소가스의 열분해과정에서 생성되는 수소의 영향이 아닐까 가정하게 되었다. 이러한 탄화수소의 열분해과정에서 수소의 역할을 규명하기 위해서 아세틸렌가스의 열분해과정에 정밀하게 제어된 양의 수소를 주입하면서 탄소나노입자의 생성을 실시간으로 모니터링한 결과 수소의 주입이 탄소나노입자의 생성 및 성장을 억제하는 역할을 함을 관찰하였다. 결국 탄화수소가스의 열분해과정에서 적절하게 수소의 양을 제어한다면 최종적으로 생성되는 탄소나노입자의 크기를 제어할 수 있을 것이다.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.492-498
• /
• 2002

In this paper, we present the simulation results of multi-layer VCO(voltage controlled oscillator), which is composed of resonator, oscillator, and buffer circuit, using EM simulator and nonlinear RF circuit simulator. EM simulator is used for obtaining the EM(Electromagnetic) characteristics of conductor pattern as well as designing the multi-layer VCO. Obtained EM characteristics were used as real components in nonlinear RF circuit simulation. Finally the overall VCO was simulated by the nonlinear RF circuit simulator. The material for the circuit pattern was Ag and the dielectric was Dupont 951AT, which will be applied for LTCC process. The structure of multi-layer VCO is constructed with 4 conducting layer. Simulated results showed that the output level was about 4.5 [dBm], the phase noise was -104 [dBc/Hz] at 30 [kHz] offset frequency, the harmonics -8 dBc, and the control voltage sensitivity of 30 [MHz/V] with a DC current consumption of 9.5 [mA]. The size of VCO is $6{\times}9{\times}2 mm$(0.11 [cc]).

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.454-459
• /
• 2003

인프라 시설에 대한 투자와 같이 대형 프로젝트를 진행하는데 있어서 타당성분석은 프로젝트 전체 투자의 규모, 기간 등을 결정하는 기초자료의 역할을 하게 된다는 점에서 매우 중요하다. 하지만 국내에서 수행된 타당성 분석의 경우 평가 기준이 불분명하고, 평가 방법이 체계적이지 못한 등 많은 문제점들을 가지고 있다. 이에 본 연구에서는 타당성분석의 많은 문제점들 중에서 최근 그 중요성이 더욱 더 커지고 있는 경제적 타당성분석 및 재무적 타당성분석에 따르는 문제점을 정리하고 개선책을 제시하는 한편, 타당성분석 과정에서 예측 가능한 리스크를 식별 이론적, 정책적 관리 방안을 이용한 프로세스 통하여 투자자나 사업주체로 하여금 리스크를 관리 할 수 있는 방안을 제시하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.653-656
• /
• 2002

In this paper, we present the simulation results of multi-layer VCO(voltage controlled oscillator), which is composed of resonator, oscillator, and buffer circuit, using EM simulator and nonlinear RF circuit simulator. EM simulator is used for obtaining the EM(Electromagnetic) characteristics of conductor pattern as well as designing the multi-layer VCO. Obtained EM characteristics were used as real components in nonlinear RF circuit simulation. Finally the overall VCO was simulated by the nonlinear RF circuit simulator. The material for the circuit pattern was Ag and the dielectric was DuPont 951AT, which will be applied for LTCC process. The structure of multi-layer VCO is constructed with 4 conducting layer. Simulated results showed that the output level was about 4.5 [dBm], the phase noise was -104 [dBc/Hz] at 30 [kHz] offset frequency, the harmonics -8 dBc, and the control voltage sensitivity of 30 [MHz/V] with a DC current consumption of 9.5 [mA]. The size of VCO is $6{\times}9{\times}2$ mm(0.11[cc]).

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.20-30
• /
• 2013

This paper presents a soft switching DC/DC converter for high voltage application. The interleaved pulse-width modulation (PWM) scheme is used to reduce the ripple current at the output capacitor and the size of output inductors. Two converter cells are connected in series at the high voltage side to reduce the voltage stresses of the active switches. Thus, the voltage stress of each switch is clamped at one half of the input voltage. On the other hand, the output sides of two converter cells are connected in parallel to achieve the load current sharing and reduce the current stress of output inductors. In each converter cell, a half-bridge converter with the asymmetrical PWM scheme is adopted to control power switches and to regulate the output voltage at a desired voltage level. Based on the resonant behavior by the output capacitance of power switches and the transformer leakage inductance, active switches can be turned on at zero voltage switching (ZVS) during the transition interval. Thus, the switching losses of power MOSFETs are reduced. The current doubler rectifier is used at the secondary side to partially cancel ripple current. Therefore, the root-mean-square (rms) current at output capacitor is reduced. The proposed converter can be applied for high input voltage applications such as a three-phase 380V utility system. Finally, experiments based on a laboratory prototype with 960W (24V/40A) rated power are provided to demonstrate the performance of proposed converter.