• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.45-53
• /
• 2006

The purpose of this study was to analyze exercise related mechanical variables according to performance levels and Kumi-kata types in elite judo players (G1) and non-elite judo players, namely university players (G2). To achieve this purpose, three players in G1 whose main special skill was Morote-Seoinage and three university judo players(G2) was selected as comparative group. Then they were examined for distinguishing A and B types of Kumi-kata. Analyzed variables were the time required to show skills, knee degree, elbow degree. After analysing this study, conclusions were derived as follows. 1. In total necessary time of showing skills according to group of Kumi-kata type, G2 was longer than G1 in both A type (20.9%) and B type (23.7%). In necessary time of phase, in only 3P, G1 was shorter than G2 in A type (50%) and B type (75%). There was no difference in time required of 1P and 2P according to Kumi-kata type of group and in only 3P, B type was shorter than A type in both B type (75%) of G1 and B type (50%) of G2 2 There was no difference in elbow degree of offensive arm according to group of Kumi-kata type, however in A and B types, G1 could use skills by extending in kake phase, but G2 could use skills by bending. Elbow degree of offensive arm according to Kumi-kata type of group showed difference in E1. and F2 of G1. A and B types of G1 extended elbow degree in Kake phase, but G2 bent elbow degree so exercise program which could movable range extensively in Kake phase is needed.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.203-218
• /
• 2004

The purpose of this study was to analyze the comparisons of the kinematical variables when performing Yoko Ukemi(side breakfall) by three Stage in Judo. The subjects were four male judokas who were trainees Y. I. University Squad members and the Yoko Ukemi were filmed by two S-VHS 16mm video cameras(60fields/sec.). The selected times were subject to KWON 3D analysis program and kinematical analysis to compare variables of three Yoko Ukemi. Temporal variables(total time-required : TK, TR by each phase), the body part touched order on the mat and COG variables were computed through video analysis while performing right Yoko Ukemi by three stage. From the data analysis and discussion, the following conclusions were drawn : 1. Temporal variables : total time-required(TR) when performing Yoko Ukemi(side breakfall) by each stage, the first stage(full squat posture: FP : 1.11sec.) showed the shortest time, the next was 3rd(Shizenhontai, straight natural posture: NP : 1.41sec.), and 2nd(Jigohontai, straight defensive posture, DP : 1.42sec.), respectively- 2. TR when performing Yoko Ukemi(side breakfall) by each stage, and phase : the first phase(take of phase, average 0.68sec.) showed the longest time, next was the third phase(ukemi phase, 0.39sec.), and the second phase(air phase, 0.23sec.), respectively. 3. When performing yore Ukemi the body part touched order and TR on the mat : hip(0.94sec.) showed the shortest time, the next was elbow hand(0.97sec.), back(0.98sec.), and shoulder(1.04sec.) order. The hip part touched on the mat the first, but slap the mat in order to alleviate the shock try hand palm and forearm before receiving impact (difference 0.03sec,) 4. Vertical COG variables in each event by each stage : e1(ready position, average 78.33cm) moved the highest, the next was e2(jumping position, 70.14cm), e3(transition position, average 64.00cm), e4(landing position, average 35.99cm), and e5(ukemi position, average 18.32cm) order, gradual decrease respectively. And the difference of COG were showed in initial by each stage, because position fo Yoko Ukemi was difference by each stage in preparation position, but in accordance with executing of Ukemi phase that difference of COG was by decreasing, almost equal displacement in e4(landing) and e5(Ukemi)position finally.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.5
• /
• pp.467-472
• /
• 2007

In this study the penetration distance of liquid phase fuel(i.e. liquid phsae length) was investigated in evaporative field. An exciplex fluorescence method was applied to the evaporative fuel spray to measure and investigate both the liquid and the vapor phase of the injected spray. For accurate investigation, images of the liquid and vapor phase regions were recorded using a 35mm still camera and CCD camera, respectively. Liquid fuel was injected from a single-hole nozzle (l/d=1.0mm/0.2mm) into a constant-volume chamber under high pressure and temperature in order to visualize the spray phenomena. Experimental results indicate that the liquid phase length decreased down to a certain constant value in accordance with increase in the ambient gas density and temperature. The constant value, about 40mm in this study the, is reached when the ambient density and temperature of the used fuel exceed critical condition.

• Journal of Korean Society for Quality Management
• /
• v.47 no.1
• /
• pp.151-162
• /
• 2019

Purpose: This study is in order to secure high quality of military supplies, it is important to secure design quality in the development phase. I will review how to establish a quality assurance system in the development phase based on the author's seminar presentation contents and application example of Hanwha Systems Co., Ltd. Methods: To guarantee design quality in the development phase, in 2002, quality assurance system that is adequate for SQA(Software Quality Assurance)'s requirements of CMM(Capability Maturity Model) was conduct. In 2009, based on the CMMI(Capability Maturity Model Integration) Level 5, there has been continuous and reenforced quality assurance activities. Results: By suggesting the construction and a case study on application of R&D quality assurance, it would be helpful for companies aiming to construct or enhance quality assurance system. Conclusion: To secure high quality for military supplies, a development QA system should be established to secure quality in the development phase. In addition, Total life cycle QA system for development, mass production and operation phase should be reestablished.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.5
• /
• pp.469-476
• /
• 2008

In this paper, it is shown that an input-output (I/O) feedback linearized controller can be designed rationally by utilizing the time-scale properties of heave and pitch for an underwater vehicle. It is assumed that the dynamics of the vehicle is restricted to the vertical plane. An output-feedback control is designed, which stabilizes steady cruising paths. It is shown that the vehicle dynamics with acceleration as output becomes minimum phase. The dynamics can be transformed into a reduced system through a kind of partial linearization and singular perturbation technique. The reduced system is not only minimum phase but also exactly I/O linearizable via feedback. The I/O dynamic characteristics of the heave and pitch modes can be made linear and decoupled. Furthermore it becomes independent of cruising condition such as vehicle velocity. This study may help for designing autopilot systems for underwater vehicles.

• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.85-95
• /
• 2004

The Purpose of this study was to find a phase of clothing in Korean proverb. The results of the analysis of this research was as follows： In the case of headgear, was expose that symbolize handsomeness, conduct of life, personality that display charm and position which is not usage as only head protection. Upper wear was expressing aspect and person's similarity, and was symbolizing conduct of life by meaning of dress and its ornaments according to a person that dress displays that change. Trousers(bottom wear) was expose that it means aspect or conduct of life(a 4 case, 40％) through site. Overcoat showed that overcoat that is clothes that is symbolizing wearer's situation, aspect and wear most on face because is involved with behavior that is not right in clothes usage is used by standard that foretell personality. Underwear can know that expressed being involved with right behavior, nature by the basic clothes. I was able to know that I express an attitude of a life or a form through shoe, and the accessories won an minor order but that I have a large influence on a character or the appearance of a person. Silk fabrics expresses Position, and hemp cloth expressed by symbol that display ability. Also, silk fabrics had meaning that hint person's background. Dress and its ornaments that is used in proverb by these result can know that have function as symbolic symbol that display Person's nature or situation, aspect that is wearing clothes that is not function as only simple clothes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.5
• /
• pp.398-407
• /
• 2002

An experimental and analytical study was made on the heat transfer characteristics of one small (150 W), two medium (60 and 1,500 W, respectively) and two large (7,500and 100,000 W) two-phase loop thermosyphons (TLT), and the results from the experiments were used to see if a computer simulation code alone for such TLT heat transfer systems would give any meaningful quantitative results without being accompanied with some benchmark experimental verification. Two simulation methods were used for the analysis of the systems, i.e., the lumped and the sectorial thermal resistance methods. The study clearly shows that the computer simulation for the three TLTs can predict the most cases of the affecting parameters involved, provided that correct empirical correlations are used. To do so, however, the interior temperature distribution had to be verified by experiment.

• Korean Journal of Veterinary Research
• /
• v.33 no.1
• /
• pp.23-36
• /
• 1993

To investigate the cycle and relative frequences and the fine structure of seminiferous epithelia in mature Jindo dogs, histologic study was performed. The results obtained were summarized as follows; 1. Type A spermatogonia appeared approximately 1.6 times as many at stage II as compared to stage I while type In spermatogonia appeared small amount in stage III, IV and V. type B spermatogonia were found during the stage VI to VIII, though not detectable during stage I to V. The type B spermatogonia divided at stage VII to produce the preleptotene primary spermatocytes at stage VIII. The number of primary spermatocytes of the leptotene phase markedly increased during stage I to II, and the primary spermatocytes of the pachytene phase were shown the least in number at stage IV. The secondary spermatocytes could be seen only at stage IV. 2. The relative frequencies of each stage from stages I to VIII of the cycle of seminiferous epithelia were 31.6, 11.9, 10.0, 3.2, 8.2, 10.1, 11.7 and 13.2% respectively. 3. On electron microscopic observations, acrosomal vesicle of spermatids appeared larger though the bulk of germ cells were the morphologically same as those of the other animal species. Thread line structures light microscopically observed in the cytoplasm of Sertoli cell were the longitudinal orientation of mitochondria.

• Korean Journal of Acupuncture
• /
• v.21 no.2
• /
• pp.139-145
• /
• 2004

Objectives : Inhibition of phase I enzymes such as cytochrome P450 (CYP) 1A1 or 1A2 is considered a major mechanism of protection against initiation of carcinogenesis. The inhibition of toxic enzymes and CYP were studied with so many oriental herbral medicine. Recently, numerous polysaccharides and polysaccharide-protein complexes have been isolated from mushrooms and used as a source of therapeutic agents. The most promising biopharmacological activities of these polymers are their immunomodulation and anti cancer. But, in this study the inhibitory effect was on the aqua-acupuncture of Lentinus edodes. Materials : Lentinus edodes aqua-acupuncture solution (LEAS) was prepared and tested for the inhibition of cytochrome P450 (CYP) 1A1 and 1A2 activities. LEAS type I from fruit body of these mushrooms. Type II was extracted from cultured broth of Lentinus edodes mycelum. Results : LEAS type I and type II were significantly inhibited CYP 1A1 and 1A2 enzymes at concentration of 5.0 and 10.0 mg/ml. Conclusion : These results suggested that LEAS may act as block agent against carcinogenesis by inhibition of phase I enzymes.

• KSTLE International Journal
• /
• v.1 no.2
• /
• pp.69-75
• /
• 2000

The paper compares topography, phase contrast and force spectroscopy in atomic force microscopy data for evaluating the microheterogeneity of surface layer. The worn surface of ion-plated TiN coating was measured using both a laboratory-built and a commercial AFM. The results of analysis revealed structural and micromechanical heterogeneity of the worn surfaces. We demonstrated that the phase image allows relatively qualitative estimation of elastic modulus of the sample surface. The tribolayer formed in the worn surface possessed much lower stiffness than the original coating. It is shown that the most stable phase imaging is provided with a stiff cantilever. In this case, phase contrast is well conditioned, first of all, by microheterogeneity of elastic properties of the investigated surfaces. In this study an attempt was also made to correlate the results of phase imaging with that of the farce spectroscopy. The joint analysis of information on the surface properties obtained by the phase imaging and quantitative data measured with the force spectroscopy methods allows a better understanding of the nature of the surface micromechanical heterogeneity.