• Journal of the Optical Society of Korea
• /
• 제14권3호
• /
• pp.240-244
• /
• 2010

In this work, we used PWM sampling for demodulation of a fiber-optic interferometric current transformer. The interference signal from a fiber-optic CT is sampled with PWM triggers that produce a 90-degree phase difference between two consecutively sampled signals. The current-induced phase is extracted by applying an arctangent demodulation and a phase unwrapping algorithm to the sampled signals. From experiments using the proposed demodulation, we obtained phase measurement accuracy and a linearity error, in AC current measurements, of ~2.35 mrad and 0.18%, respectively. The accuracy of the proposed method was compared with that of a lock-in amplifier demodulation, which showed only 0.36% difference. To compare the birefringence effects of different fiber-optic sensor coils, a flint glass fiber and a standard single-mode fiber were used under the same conditions. The flint glass fiber coil with a Faraday rotator mirror showed the best performance. Because of the simple hardware structure and signal processing, the proposed demodulation would be suitable for low-cost over-current monitoring in high voltage power systems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.511-512
• /
• 2009

• 대한의용생체공학회:의공학회지
• /
• 제30권1호
• /
• pp.79-88
• /
• 2009

A harmonic quadrature demodulation method to extract the second harmonic component from focused ultrasound signals after a single transmit-receive event is proposed. In the proposed method, the focused ultrasound signal is converted into baseband inphase and quadrature components by multiplying with sine and cosine signals both having twice the center frequency of the transmitted signal and filtering the two modulated signals. The quadrature component is then passed through a Hilbert filter to be added to the inphase component, which leaves only the envelope of the second harmonic component. A novel phase estimation technique is employed in the proposed method to avoid the phase mismatch between the focused signal and the two modulating signals. The proposed method is verified through both theoretical analysis and computer simulations. It is shown that compared to the pulse inversion scheme the proposed method provides almost the same results for stationary targets and significantly improved harmonic to fundamental ratio for moving targets.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.857-860
• /
• 1999

It is made possible a removal of the preamble for carrier recovery and symbol-timing recovery by storing a burst in memory with low overhead QPSK demodulation and this demodulation method also effects frame efficiency improved by processed synchronization performance. In this paper, we have proposed that new algorithm for arc-tangent look-up table which transform the input I, Q data by phase. This I, Q data plays an important role in demodulation and makes demodulator with low-overhead by storing a burst in memory. To evaluate proposed new algorithm and symbol-timing recovery method, function simulation and timing verification have been done by using synopsys VHDL tool.

• 한국안전학회지
• /
• 제31권6호
• /
• pp.19-24
• /
• 2016

One of key parameters on lightning protection system design of electric, information and communication system is grounding impedance. Earth impedance includes numerous information about earthing performance of grounding system. This paper suggests grounding impedance measuring device which is comprised of wideband current source, voltage and current measuring components. We used IQ Demodulation to measure more accurate phase difference of voltage and current. The range of frequency is up to 1 MHz that is IEEE defined as the range of lightning surge. We compared developed grounding impedance measuring device with existing one to test its performance, and we used grounding system while we implemented measurement and analysing by using fall of potential method IEEE Std.81 proposed.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1777-1786
• /
• 1996

This paper describes theories and implementation techniques of a digital high-definition television(HDTV) modem based on 32-QAM for terrestrial broadcasting. We proposed a digital demodulation scheme and a symbol timing recovery structure based on the band edge component maximization(BECM) method. The adaptive equalizer has 256 complex taps to remove the multipath of delays ranging from -2.mu.s~+24.mu.s with a new T/2-spaced blind equalization algorithm. computer simulation results reveal that the proposed algorithm outperforms other conventional blind equalization algorithm a digital HDTV modem with 4.91MHz symobol rate is implemented by utilizing the proposed algorithms. All processings for modem operations such as demodulation, estimation of symbol timing phase error, adaptive equalization, and carrier recovery except IF signal processing and sampling phase control part of the AD converter are done in digital domain. Especially, the carrier recovery loop can track a carrier offset of upto .+-.350KHz.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.288-291
• /
• 2014

This paper presents a new method for measuring the half-wave voltage $V_{\pi}$ of an electro-optic phase modulator based on a phase-modulated photonic link with interferometric demodulation. By using this method, the $V_{\pi}$ can be obtained with the RF voltage amplitude input required to achieve 1-dB gain compression of link and the differential delay of a Mach-Zehnder interferometer. We measure the $V_{\pi}$ of a commercial phase modulator by using the presented method and the carrier/the first sideband intensity ratio method. Furthermore, we compare the two measurements with the typical value provided by the manufacturer. The experiment shows that this novel measurement method is feasible, straightforward, and accurate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.291-292
• /
• 2008

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.5-8
• /
• 2001

SSB(Single Sideband) modulation scheme is high bandwidth efficient method in the mobile communication system compared with present DSB(Double Sideband) modulation scheme. Using the othogonality between inphase PN code and Hilbert transformed quadrature PN code, we propose phase estimation structure that enables coherent demodulation in the reverse link basestation receiver Several system characteristics, bit error rate and phase error variance, are simulated and compared with balanced QPSK DS/CDMA system. To verify system performance, SSB/BPSK-DS/CDMA test board is implemented using FPGA chips.

• 대한전자공학회논문지TC
• /
• 제44권6호
• /
• pp.64-70
• /
• 2007

본 논문에서는 five-port 접합을 이용한 RF 수신기를 위한 새로운 동시 DC 오프셋 제거와 I/Q 신호 재생 알고리즘을 제안한다. 제안한 방법에서는 단일주파수 CW 신호를 사용하는데, 제안한 방법이 반송파 위상 오프셋에 상관없이 사용할 수 있도록 한다. 또한 제안한 방법은 추가적인 DC 오프셋 제거 기능이 필요 없고, I/Q 재생 파라미터 추정시간을 크게 줄인다. 제안한 방법에서는 변조방식에 상관이 없는 단일주파수 CW 신호를 사용하므로, five-port 접합을 이용한 RF 수신기가 위상편이변조 (PSK) 뿐 만 아니라, 연속위상변조 (CPM)와 직교주파수다중분할 (OFDM)에도 사용될 수 있다.