• 조명전기설비학회논문지
• /
• 제26권6호
• /
• pp.73-80
• /
• 2012

Generally, the phase control dimmer has been widely used due to simple interface and easy handling. However, the electrical characteristics are not good for the method in which the phase control dimmer cuts the input voltage. This paper has researched about DALI(Digital Addressable Lighting Interface) controller, that is the digital lighting control method, and implemented DALI protocol satisfied with the IEC-62386 standard. In addition, the existing phase control dimmer was used as the controller of DALI and not only individual control but also group control was possible. And the performance was proved to be good by applying our theory to 30[W] LED lighting control system.

• 조명전기설비학회논문지
• /
• 제22권5호
• /
• pp.108-115
• /
• 2008

최근, 디지털 디머 시스템의 수요는 꾸준히 증가하고 있는 추세이다. 하지만, 국내 연구는 그에 비하여 미비한 실정이다. 본 논문에서는 디지털 디머 장치들을 설계, 제작하고, 시스템을 구성하는 방법을 제안한다. 디지털 디머 장치들은 크게 콘솔과 디머 랙으로 나눌 수 있으며, 콘솔은 GUI환경의 사용자 인터페이스를 제공하여 손쉽게 각 조명기기를 제어하는 패턴을 구현하며, 디머 랙은 콘솔로부터 전송받은 각 조명 레벨을 위상각 제어 방식으로 조명기기의 밝기를 제어한다.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.580-591
• /
• 2014

This paper concerns a three-phase self-excited induction generator used for autonomous power generation. It presents a robust control strategy which makes it possible to maintain the frequency quasi constant during the voltage regulation without any control loop on this variable. This strategy, which also prevents the machine disengagement, uses as power converter a simple dimmer. The obtained theoretical and/or numerical results are validated on a laboratory test bench that allows the analysis of this control law effectiveness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.252-254
• /
• 2000

For many years, electric utility has used sustained interruption rates as a reliability index. Today, however, many electricity consumers are adversely affected by more subtle voltage disturbances such as harmonic distortion. This paper deals with observations of events that occur in the Dimmer circuits and phase control which could affect harmonics problem to the commercial power system. In order to reduce the effect of harmonics and design filters, Solid State Relay Dimmer(SCRs or TRIACs) and Noise Filter are described, and the effects of harmonics is also analyzed. IGBT Dimmer which is appropriate method to reduce harmonics and improve efficiency is introduced.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.210-212
• /
• 2018

A new switching mode has been proposed to obtain high power factor and low THD in single stage AC-DC converter. The conventional voltage mode control in critical conduction mode distorts input current shape with poor THD in flyback topology. Once TRIAC dimmer is connected, visible flicker in the LED lamp is easily detected due to a lack of TRAIC holding current near the input voltage zero cross. The newly proposed method can shape the input current by providing a desired reference voltage so that low THD is obtained by ideal sinusoidal input current in case of no dimmer connection and flat input current performs good TRIAC dimmer compatibility in phase-cut dimming condition. To confirm the validity of the proposed method, theoretical analysis and experimental result from 8W dimmable LED lighting system are presented.

• Macromolecular Research
• /
• 제10권5호
• /
• pp.259-265
• /
• 2002

The cure kinetics of blends of epoxy (DGEBA, diglycidyl ether of bisphenol A)/anhydride resin with polyamide copolymer, poly(dimmer acid-co-alkyl polyamine), were studied using differential scanning calorimetry (DSC) under isothermal condition. On increasing the amount of polyamide copolymer in the blends, the reaction rate was increased and the final cure conversion was decreased. Lower values of final cure conversions in the epoxy/(polyamide copolymer) blends indicate that polyamide hinders the cure reaction between the epoxy and the curing agent. The value of the reaction order, m, for the initial autocatalytic reaction was not affected by blending polyamide copolymer with epoxy resin, and the value was approximately 1.3, whereas the reaction order, n, for the general n-th order of reaction was increased by increasing the amount of polyamide copolymer in the blends, and the value increased from 1.6 to 4.0. A diffusion-controlled reaction was observed as the cure conversion increased and the rate equation was successfully analyzed by incorporating the diffusion control term for the epoxy/anhydride/(polyamide copolymer) blends. Complete miscibility was observed in the uncured blends of epoxy/(polyamide copolymer) up to 120 $^{\circ}C$, but phase separations occurred in the early stages of the curing process at higher temperatures than 120 "C. During the curing process, the cure reaction involving the functional group in polyamide copolymer was detected on a DSC thermogram.gram.