• 제목/요약/키워드: Phase Behavior

검색결과 2,969건 처리시간 0.036초

시멘트/Fe(II) 시스템에서의 TCE 분해 기작 (Degradation Mechanisms of TCE in Cement/Fe(II) Systems)

  • 이윤모;강완협;최원호;황인성;박주양
    • 대한환경공학회지
    • /
    • 제29권7호
    • /
    • pp.778-782
    • /
    • 2007
  • 본 연구는 시멘트/Fe(II) 시스템의 TCE 분해 기작에 관한 것이다. 회분식 슬러리 실험을 통해 시멘트/Fe(II) 시스템 내에서 선별된 이온들의 거동을 조사하였다. 시멘트/Fe(II) 시스템에서 주입된 Fe(II)은 반응시간 12시간 이내에 대부분 고체상으로 흡착되었으며 Fe(II)와 함께 주입된 sulfate 역시 12시간 이내에 90% 정도 고체상으로 이동하였다. 시멘트/Fe(II) 시스템의 Fe(II)-Fe(III) (수)산화물 형성을 모사한 적철석/CaO/Fe(II) 시스템의 TCE 분해능 실험결과 시멘트/Fe(II)에 상응하는 분해속도를 보였다. 칼슘산화물은 시멘트 수화물의 주요 구성성분의 하나로서 시멘트 내에 60% 정도 함유되어 있으며 제한된 조건에서 반응성을 갖는 것으로 알려져 있다. 적철석은 시멘트에 포함되어 있는 철산화물을 모의한 것으로 선별실험을 통해 결정하였다. 적철석/CaO/Fe(II) 시스템 내에서의 Fe(II)과 sulfate의 초기 거동은 시멘트/Fe(II) 시스템과 거의 유사하게 나타났다. 적철석/CaO/Fe(II) 시스템을 이용한 TCE 분해 kinetic 실험결과와 선별된 이온들인 Fe(II)과 $SO_4^{2-}$의 초기 거동으로 볼 때 시스템 내에서 green rust와 같은 Fe(II)-Fe(III) 혼합 광물이 형성되는 것으로 판단된다. 따라서 시멘트/Fe(II) 시스템의 TCE 분해는 시멘트에 흡착된 Fe(II)이 반응성을 갖는 Fe(II)-Fe(III) (수)산화물로의 변환을 통한 기작을 갖는 것으로 판단된다.

액상 TCE 제거반응을 위한 $CoO_x/TiO_2$ 촉매 (Heterogeneous Oxidation of Liquid-phase TCE over $CoO_x/TiO_2$ Catalysts)

  • 김문현;추광호
    • 대한환경공학회지
    • /
    • 제27권3호
    • /
    • pp.253-261
    • /
    • 2005
  • 불균일 $CoO_x/TiO_2$ 촉매가 충진된 연속 흐름식 고정층 반응기 내에서 ppm 수준으로 수중에 존재하는 trichloroethylene (TCE) 제거반응을 수행하였으며, 가장 우수한 반응활성을 갖는 촉매의 결정구조와 표면화학적 특성을 분석함으로써 반응시간에 따라 분해활성이 전이영역을 보이는 원인을 규명하고자 하였다. $36^{\circ}C$의 반응온도에서 모델반응의 내부확산저항은 없었으며, $TiO_2$ 표면에 흡착에 의한 액상 TCE 제거정도는 무시할 수 있었다. 5% $CoO_x/TiO_2$ 촉매는 본 대상반응에 대하여 가장 우수한 활성을 갖는 것으로 나타났으며, 반응시간의 경과정도에 따라 TCE 분해효율이 점진적으로 증가하여 안정화되는 전이영역의 존재를 확인할 수 있었다. 반응 전 5% $CoO_x$ 촉매에 대한 XRD 패턴에서 담지체로 사용된 $TiO_2$에 의한 피크들 외에 새로운 피크가 관찰되었고, 5시간 이상 동안 반응한 후에 건조된 촉매의 경우에도 반응 전 촉매의 XRD 피크와 매우 유사하였다. $Co_3O_4$의 XRD 패턴들과 대조한 결과, 5% $CoO_x$ 촉매상에서 Co 화합물에 의해 야기되는 XRD 피크들은 $Co_3O_4$에 의한 것임을 알 수 있었다. 반응물에 노출되지 않은 5% $CoO_x/TiO_2$ 촉매에 대한 XPS 측정은 797.1 eV에서 Co $2p_{1/2}$에 대한 주피크와 함께 781.3 eV에서 Co $2p_{3/2}$에 대한 주피크가 관찰되어졌다. 반응 후 촉매의 경우에는 Co $2p_{3/2}$ 및 Co $2p_{1/2}$의 binding energy들은 각각 780.3과 795.8 eV에서 나타났다. 반응 전 후 촉매상에서 Co $2p_{3/2}$의 binding energy 차이는 1.0 eV이고, Co $2p_{1/2}$의 binding energy 차이는 1.3 eV이다. 표준 $Co_3O_4$에 대한 XPS 측정결과, 반응 후 촉매상에 존재하는 $CoO_x$$Co_3O_4$로 존재하고, 반응 전의 경우에는 이와는 다른 chemical state를 보여주었다. XRD 및 XPS 결과를 바탕으로, 촉매표면에 존재하는 $Co_3O_4$의 외부표면이 $Co_2TiO_4$$CoTiO_3$ 같은 $CoTiO_x$로 encapsulation되어 있는 모델구조를 제안할 수 있고, 이는 반응시간의 함수로 나타나는 촉매활성에 있어서 전이영역의 존재를 잘 설명할 수 있을 뿐만 아니라, XRD와 XPS에서 얻어진 촉매의 물리화학적인 특성을 잘 반영할 수 있다.

Structural Behavior of Mixed $LiMn_2O_4-LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ Cathode in Li-ion Cells during Electrochemical Cycling

  • 윤원섭;이상우
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2011년도 춘계학술발표대회
    • /
    • pp.5-5
    • /
    • 2011
  • The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

  • PDF

정현하중재하 진동삼축시험에 기초한 포화사질토의 액상화 한계저항특성 (A Critical Liquefaction Resistible Characteristic of Saturated Sands Based on the Cyclic Triaxial Test Under Sinusoidal Loadings)

  • 최재순;김수일
    • 한국지반공학회논문집
    • /
    • 제20권8호
    • /
    • pp.147-158
    • /
    • 2004
  • 국내 액상화 상세평가에 관한 시방내용을 살펴보면, 지진을 정현하중으로 고려한 등가전단응력개념에 기초하여 전단응력을 달리한 3회 이상의 액상화 발생 실내진동시험을 수행하고 이를 토대로 액상화 저항응력비 곡선을 도시하여 지진규모별로 적용할 것을 명시하고 있다. 즉, 현행 액상화 상세평가에서는 실내진동시험결과인 응력, 변형률, 과잉간극수압, 유효응력, 응력 경괴의 변화 등의 다양한 결과들을 효과적으로 이용하지 못하고 최대전단응력과 액상화 발생시 진동재하횟수라는 단순한 시험결과만을 이용하여 액상화 평가를 수행한다. 본 연구에서는 현행 액상화 상세평가에서의 단순한 시험결과의 이용을 탈피하여 응력, 변형률, 그리고, 과잉간극수압 시간이력들과 응력-변형률 상관관계 및 유효응력경로 등의 다양한 실내진동시험 결과를 토대로 액상화 발생메카니즘을 포함한 지반의 동적저항상태를 분석하였다. 특히, 과잉간극수압의 영향을 고려한 동적 유효응력경로가 지반의 동적거동을 효과적으로 구분하여 나타낼 수 있는 점을 발견하고 이를 토대로 지반의 동적상태를 점진적 응력감소, 급진적 응력감소, 그리고 액상화 후 극한상태의 3단계로 구분하였다. 또한, 액상화 현상이 실제적으로 점진적 응력감소에서 급진적 응력감소로 전환되는 시점에서 대변형을 동반하여 발생한다는 사실을 발견하고 이를 액상화 상태전환시점으로 정의하였으며 이러한 액상화상태전환시점이 압축제하 또는 인장재제하로 하중방향이 바뀌는 시점에서 발생하는 점을 반영하여 1/4주기별 시험결과분석에 기초하여 저항특성을 나타내었다. 그리고, 본 연구를 통해 제안된 액상화 저항특성에 대한 타당성 검토를 위해 과잉간극수압으로 인해 발생하는 지반재료 내부에서 소산되는 에너지 개념과 기제안된 교란상태개념에 기초한 액상화 저항특성과 비교하였다. 연구결과, 제안된 누적 소성 전단변형률은 액상화 발생의 원인이 되는 과잉간 극수압의 영향을 합리적으로 표현하고 있을 뿐만 아니라 진동하중으로부터 소산되는 재료 내부의 에너지 변화를 신뢰성 높게 표현하고 있는 것으로 나타났다. 특히, 제안된 지반의 한계 저항특성의 경우, 기제안된 교란도 함$.$수에 기초한 수치해석방법보다 정확하게 대변형의 영향을 포함하지 않고 한계상태를 표현하고 있는 것으로 나타났다.

전북 장수군 대유 페그마타이트광산의 전기석에 포획된 유체포유물 (Fluid Inclusions Trapped in Tourmaline from the Daeyou Pegmatite Deposit, Jangsu-Gun, Jeollabukdo)

  • 이주연;엄영보;남복현;황병훈;양경희
    • 한국광물학회지
    • /
    • 제20권1호
    • /
    • pp.7-19
    • /
    • 2007
  • 전북 장수군 대유광산에 부존하는 페그마타이트내 전기석에는 네 종류의 유체포유물이 풍부하게 포획되어 있다. 유체포유물의 크기는 $5{\sim}100\;{\mu}m$이고, 상온에서 관찰되는 상(phase)의 거동에 따라 I, II, III, IV형으로 분류된다. I형은 액체가 풍부하고 기포의 크기가 50 vol% 이하인 것으로 공융온도(eutectic point)는 $-54{\sim}-29^{\circ}C$, NaCl상당 염 농도(이하염도)는 $0{\sim}12\;wt%$, 균질화온도는 $181{\sim}230^{\circ}C$이다. II형은 기포의 크기가 $80{\sim}90\;vol%$ 이상을 차지하는 포유물로서 역시 낮은 공융온도($-54{\sim}-22^{\circ}C$)를 보이며, 염도는 $3{\sim}8\;wt%$, 균질화온도는 $177{\sim}304^{\circ}C$ 범위이다. III형은 액체가 풍부하고 암염(halite)을 딸결정으로 포함하는 포유물로서 균질화온도는 $230{\sim}328^{\circ}C$, 염도는 $31{\sim}40\;wt%$이다. III형은 규산염용융포유물과 연관되어 산출되며 가열실험 중에 90% 이상의 포유물이 기포가 사라진 후에 암염이 용해되는 거동을 보인다. IV형은 $CO_{2}$를 함유하면서 칼리암염(sylvite)이나 암염을 딸결정으로 포함하는 포유물물로서 전기석에 가장 풍부하게 포획되어 있다. $CO_{2}$시스템의 밀도는 $0.80{\sim}0.75\;g/cm^{3}$, 균질화 온도는 $190{\sim}317^{\circ}C$, 염도는 $2{\sim}35\;wt%$이다. 멜트(melt)에서 가장 먼저 용리된 유체로부터 형성된 유체포유물은 규산염용융포유물과 공간적으로 연관되어 산출되는 III형이며 I형에 비해 전기석의 중앙부에서 산출되는 II형이 I형보다 먼저 포획된 것으로 추측된다. 용융체에서 용리되진 유체의 염도는 용리압력과 밀접한 관련성이 있으며, 염도의 요동(fluctuation)은 페그마타이트가 형성되는 동안 압력의 요동이 있었음을 의미한다. IV형은 가장 후기에 포획된 유체포유물이며, 광산 주변에 분포하는 석회암체 등의 변성퇴적암류로부터 $CO_{2}$ 성분과 다양한 성분의 유체가 공급되어 생성된 것으로 여겨진다. 정동이 발달하고 있지 않으며, 백운모를 함유하고 있는 대유페그마타이트는 변성작용에 의한 부분용융에 의해 형성된 멜트에서 결정화되었으며, 상당히 높은 압력의 환경에서 대유페그마타이트의 결정화작용 과정에서 용리한 유체의 성분이 전기석에 포획되어 있다. 이때 용리된 유체는 다양한 성분을 지니고 있었으며, 매우 낮은 공융온도와 다양한 딸결정은 포유물 내에 NaCl, KCl 이외에 적어도 $CaCl_{2},\;MgCl_{2}$와 같은 성분을 포함하고 있음을 지시한다. 유체의 용리는 적어도 $2.7{\sim}5.3$ kbar 이상의 압력과 $230{\sim}328^{\circ}C$ 이상의 온도에서 시작되었다.

광주 지역에서 2015년 10월에 발생한 PM2.5 고농도 사례 특성 분석 (Investigation on Characteristics of High PM2.5 Pollution Occurred during October 2015 in Gwangju)

  • 유근혜;박승식;정선아;조미라;임용재;신혜정;이상보;김영성
    • 한국대기환경학회지
    • /
    • 제34권4호
    • /
    • pp.567-587
    • /
    • 2018
  • A severe haze event occurred in October 2015 in Gwangju, Korea. In this study, the driving chemical species and the formation mechanisms of $PM_{2.5}$ pollution were investigated to better understand the haze event. Hourly concentrations of $PM_{2.5}$, organic and elemental carbon, water-soluble ions, and elemental constituents were measured at the air quality intensive monitoring station in Gwangju. The haze event occurred was attributed to a significant contribution (72.3%) of secondary inorganic species concentration to the $PM_{2.5}$, along with the contribution of organic aerosols that were strongly attributed to traffic emissions over the study site. MODIS images, weather charts, and air mass backward trajectories supported the significant impact of long-range transportation (LTP) of aerosol particles from northeastern China on haze formation over Gwangju in October 2015. The driving factor for the haze formation was stagnant atmospheric flows around the Korean peninsula, and high relative humidity (RH) promoted the haze formation at the site. Under the high RH conditions, $SO{_4}^{2-}$ and $NO_3{^-}$ were mainly produced through the heterogenous aqueous-phase reactions of $SO_2$ and $NO_2$, respectively. Moreover, hourly $O_3$ concentration during the study period was highly elevated, with hourly peaks ranging from 79 to 95ppb, suggesting that photochemical reaction was a possible formation process of secondary aerosols. Over the $PM_{2.5}$ pollution, behavior and formation of secondary ionic species varied with the difference in the impact of LTP. Prior to October 19 when the influence of LTP was low, increasing rate in $NO_3{^-}$ was greater than that in $NO_2$, but both $SO_2$ and $SO{_4}^{2-}$ had similar increasing rates. While, after October 20 when the impact of haze by LTP was significant, $SO{_4}^{2-}$ and $NO_3{^-}$ concentrations increased significantly more than their gaseous precursors, but with greater increasing rate of $NO_3{^-}$. These results suggest the enhanced secondary transformation of $SO_2$ and $NO_2$ during the haze event. Overall, the result from the study suggests that control of anthropogenic combustion sources including vehicle emissions is needed to reduce the high levels of nitrogen oxide and $NO_3{^-}$ and the high $PM_{2.5}$ pollution occurred over fall season in Gwangju.

METRO-K를 사용한 방사능으로 오염된 도시지역에서 대응행위효과 평가 : EMRAS II 도시오염평가분과 시나리오의 이행 (Evaluation of Countermeasures Effectiveness in a Radioactively Contaminated Urban Area Using METRO-K : The Implementation of Scenarios Designed by the EMRAS II Urban Areas Working Group)

  • 황원태;정해선;정효준;김은한;한문희
    • Journal of Radiation Protection and Research
    • /
    • 제37권3호
    • /
    • pp.108-115
    • /
    • 2012
  • 국제원자력기구(IAEA)에서 주관하는 국제비교프로그램 EMRAS-2($\underline{E}$nvironmental $\underline{M}$odelling for $\underline{RA}$diation $\underline{S}$afety, Phase 2)의 도시오염평가분과에서는 도시지역의 방사성핵종 거동 모델에 대한 평가능력의 시험과 향상을 위해 방사능사고 시나리오를 설계하였다. 모델간 예측결과의 비교를 위해 선정된 도시지역에서 방사능오염 사건이 발생한 계절(여름철, 겨울철) 및 사건이 발생한 당일의 강우조건(강우 없음, 약한 강우, 강한 강우)을 고려하였고, 각기 다른 피폭자 위치에서의 다양한 대응행위에 대한 공기중 흡수선량률의 시간에 따른 변화를 분석하였다. 국내모델 METRO-K를 사용한 예측결과가 모델간 비교를 위해 도시오염평가분과에 제출되었다. 본 논문에서는 동 시나리오에 대해 METRO-K로 예측한 결과의 일부로써 대상 도시지역에 위치한 24층 상업용 건물의 1층 실내에서의 대응행위에 따른 선량저감의 효과를 제시하고 분석하였다. 평가 결과, 방사능오염 사건이 발생한 당일의 강우강도 및 계절에 따른 대응행위별 피폭저감 효과는 분명한 차이를 나타냈다. 이는 방사성핵종의 각기 다른 표면으로의 침적량과 침적 후 거동, 적용되는 대응 행위에 대한 저감효과의 차이에 기인한 것으로 분석된다. 이러한 결과로 부터 만일의 원자력발전소 사고나 방사능분산장치의 폭발 등과 같은 불의의 사건이 발생하여 도시지역에서 방사능오염이 발생될 경우, 방사능피폭에 따른 인체위해 뿐 아니라 경제 사회적 영향을 최소화하기 위해서는 사건이 일어난 시점의 계절 및 강우조건을 고려한 대응행위의 선택이 중요한 것으로 확인되었다.

Ti-Getter가 Ti0.96Co0.02Fe0.02O2의 자기적 특성에 미치는 영향 (Ti-Getter Effects on Magnetic Properties of Ti0.96Co0.02Fe0.02O2)

  • 남효덕;김성진;백종근;이상률;박철수;김응찬
    • 한국자기학회지
    • /
    • 제18권3호
    • /
    • pp.109-114
    • /
    • 2008
  • Solid State Reaction법으로 $Ti_{0.96}Co_{0.02}Fe_{0.02}O_2$ 시료를 제조하였다. 각각의 시료를 $870^{\circ}C$, $900^{\circ}C$, $930^{\circ}C$로 24시간 열처리하였다. 이 때 Ti-getter의 유무를 통해 각각의 온도에서 Ti-getter에 따라 시료의 특성이 어떻게 변화하는지 관찰하고자 한다. 제작된 시료의 구조분석을 위해 시료의 분말 회절실험을 실시하였다. VSM을 이용하여 시료의 자성을 측정하고, 금속이온의 형태와 시료 내에서 cluster로 존재하는지 여부를 조사하기 위해 TEM과 SEM, EDS실험을 하였다. XRD pattern 분석결과, 결정구조는 tetragonal구조로써, 순수한 Rutil-$TiO_2$상이 주를 이루며, 2차상으로는 getter가 없을 때는 $Fe_2TiO_5$, 있을 때는 Fe가 관측되었다. 시료의 자성을 측정한 결과, getter가 없을 때는 $870^{\circ}C$일 때 자화값은 약 $0.025{\mu}B$/CoFe 정도로 강자성을 보이지만, $900^{\circ}C$$930^{\circ}C$에서는 강자성을 보이지 않는다. Ti-getter가 있을 때의 자화값은 $870^{\circ}C$에서는 약 $1.1\;{\mu}B$/CoFe, $900^{\circ}C$$930^{\circ}C$일 때는 $1.5\;{\mu}B$/CoFe 정도로 강자성을 보인다. 이러한 자성의 차이는 Ti-getter의 유무에 따른 2차상의 차이로 결정된 것으로 보인다. Titanium이 고온에서 산소와 질소, 공기 속의 수분과 쉽게 결합하는 성질을 가지고 있기 때문에 이것을 이용하면 좀 더 낮은 산소분압을 얻을 수 있다. 시료의 산소분압에 따라 자화값이나 원자 구조의 변화에 상당한 영향을 받게 되어 시료의 특성이 다르게 나타나는 것을 확인 할 수 있다. TEM과 SEM, EDS실험결과에서는 Co와 Fe가 골고루 분포하는 영역이 있는가 하면 Ti만 관측되는 부분도 존재했다. 시료의 Co와 Fe가 시료전체에 골고루 퍼져있는 것이 아니라 부분적으로 분포하고 있음을 확인 할 수 있다.

여뀌과 이형경식물의 Dinorphism과 Bisexuality의 변화 (STUDIES ON THE DIMORPHISM AND TRANSITION OF BISEXUALITY OF HETEROSTYLOUS POLYGONACEAE)

  • Harn, Chang-Yawl
    • Journal of Plant Biology
    • /
    • 제3권2호
    • /
    • pp.6-18
    • /
    • 1960
  • The present experiments were designed in order to clarify the differences between the long and short styled plants and the transgressive gradition in the degree of dimorphism among the three heterostylous species of the Polygonus, P. japonica, F. esculentum, and P. senticosa, based on investigations regarding the floral structure, ecological and physiological traits, the results of which are summarized as follows: (1) P. japonica, although it exhibits typical dimorphism, has undergone so high a differentiation between long and short styled that its long styled individuals behave as if they were female; and short styled individuals as if male. In long-styled individuals, filament, anther, and pollen grains show signs of degeneration, most of the pollen being abortive. On the other hand, in short styled individuals, the filament, anther, and pollen grains have attained remarkable development; the pollen grians are large and fertile. In short-plant the fertilized flowers readily drop off in every stage of their embryo development. This species has completely lost the self-fertile property, which is characteristic of the non-dimorphic Polygonum genus. Although this specsei typically exhibits the physiological characteristics of the non-dimorphic Polygonum genus. Although this specisei typically exhibits the physiological characteristics of dimorphism in controlled pollination, the short-styled individuals bear no seed in nature, thus misleading taxonomists to idenfity the short-styled plant as male. 2) The morphological feature of the flower organ of P. senticosa obviously indicates definite dimorphism. Physiologically, however, no differentiation towards dimorphism was observed, the species still retaining, both in long and short-individuals, the self-fertile property common to the Polygonum genus. Elaborate examinations revealed that regardless of the modes of pollination, both fertiization and seed setting flourish, no differentiation betwen legitimate and illegitimate unions being recognizable. This sort of physiological property has not been observed in the investigations of other heterostylous plants. It is assumed that this species is differentiated structurally into dimorphism, but not yet physiologically. In nature, however, this plant would have more opportunities to be cross-pollinated, i.e., legitimately combined, than self-pollinated because of the development of two forms of flowers. 3) In terms of heterostylism, the F. esculentum just occupies the intermediate position between P. japonica and P. senticosa structurally, ecologically, and physiologically. Doescription of some of the physiological behavior of the plant will suffice to demonstrate the above facts. While P. japonica has completely lost its self-fertile property, P. senticosa still retains it wolly. In F. esculentum 2-6% of self-fertility is the result in illegitimate combination. There occur occasionally hereditary self fertile individuals among some of the F. or 20 min. irradiation plot, when they reach any stage of the same bacterial population. In addition to this increase of total population in the plots with the more dose of UV light irradiation, it seems that the more dose of UV light irradiation is the more shortened the generation time of Azotobacter. Therefore, it is clear that variation of reproductive rate must be, mere or less, due to the genetic effects induced by UV light irradiation. On the other hand, the lag phase or logarithmic growth phase in nonirradiated culture is shortened prominently, and this must be due to the difference in bacterial number of the original inoculm. The generation time of Azotobacter is shortened by exogeneous treatment of nuclei acid derivatives, and the degree is greater in case of DNA derivatives than RNA dervatives. W.H. Price reported that the rate of ribose nucleic acid to protein in Staphylococcus muscae is proportional to the generation time: that is the faster the cell can form ribose nucleic acid, the more rapid its growth. This explains the shortening of generation time by exogeneous RNA derivatives in this work reasonably. On the other hand, it is well known that the desoxyribose nuclic acid content per cell is constant and independent of the generation time. A.D. Laren and W.N. Takahashi reported that the infectious RNA from TMV is 6 times as sensitive to inactivation by UV as it is in the form of intact virus, and that inactivation of infectious TMV involves onlu a local change on RNA chain. But, the effect of exogeneous DNA in this work suggests that irradiated living cell which cotain DNA bring about some change on DNA moleculs as well as RNA molecules. And if the mutagenic effects of UV take into consideration, it is very reasonable. Therefore, it is clear that the variation of the generation time by UV irradiation is, more or less, due to the genetic effects. Therefore, it seems that the shortness of the average lifewpan of Azotobacter by UV irradiation is resulted not only from the influence of the environmental conditions, but also from the variation of genetic factor of the individual.

  • PDF

제주도(濟州道) 감귤원(柑橘園) 토양(土壤)의 인산형태(燐酸形態) 및 흡착(吸着)에 관(關)한 연구(硏究) (A Study on the Fixed Forms and Adsorption of Phosphorus in Citrus Orchard Soil Derived from Volcanic Ash)

  • 김형옥
    • Applied Biological Chemistry
    • /
    • 제17권3호
    • /
    • pp.219-234
    • /
    • 1974
  • 인산고정능(燐酸固定能)이 대단(大端)히 큰 것으로 알려진 제주도(濟州道) 화산회토양(火山灰土壞)에서 시용인산(施用燐酸)의 동태(勳態)를 파악(把握)코저 재배년수(栽培年數)가 다른 감귤원(柑橘園)에서 채취(探取)한 토양(土壤)에 대(對)하여 인산(燐酸)의 분별정량(分別定量)을 행(行)하고 각(各) 토양인산(土壤燐酸)의 축적형태(蓄積形態), 그의 토심(土深)에 따른 변화(變化) 및 이들에 영향(影響)을 미치는 토양(土壤)의 이화학적(理化學的) 성질(性質)과의 관계(關係)를 비교검토(比較檢討)함과 아울러 인산흡착실험(燐酸吸着實驗)을 행(行)하여 인산흡착(燐酸吸着)에 대(對)한 등온흡착식(等溫吸着式) 및 인산시용량(燐酸施用量) 결정기준(決定基準)인 인산흡수계수(燐酸吸收係數)에 대(對)한 검사(檢討)를 하였던 바 다음과 같은 결과(結果)를 얻었다. 1. 무기인산(無機燐酸)의 분별정량(分別定量)을 Chang & Jackson 법(法)에 의(依)하여 행(行)한 결과 형태별(形態別) 함량(含量)은 Water-soluble p

  • PDF