• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.3
• /
• pp.371-379
• /
• 1997

A theoretical study for a forced uniform flow impinging on a rotating disk, typically involved in Chemical Vapor Deposition(CVD) and Vapor-phase Axial Deposition(VAD) processes, has been carried out. A set of exact solutions for flow and temperature fields are developed by employing a similarity variable obtained from force balance on a control volume near the disk. The solutions depend on the rotating speed of the disk, .omega., and the forced flow speed toward the disk, a. For constant forced flow speed, the overall boundary layer thickness decreases when the rotating speed increases. Approximately 5%, 15%, and 30% decreases of the thickness are obtained for .omega./a = 2, 5, and 10, respectively, compared to the case of .omega./a = 0 (axisymmetric stagnation point flow). For constant rotating disk speed the boundary layer thickness immediately decreases as the forced flow speed increases, compared to the case of .omega./a .rarw. .inf. (induced flow near a rotating disk). Effects of .omega. and a on heat transfer coefficient are studied and explained with the boundary layer characteristics.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.24-29
• /
• 2003

Deep sea water has cold temperature, abundant nutrients and minerals, and good water quality that is pathogen-free and stable. Compared with surface water, deep sea water contains more nutrition salt, such as nitrogen and phosphor. Moreover, if has the good balance of minerals. Because of the ability of the spray drying process to produce a free-flowing power considering of spherical particles with a well-defined size distribution and the rapid drying times for heat-sensitive material, spray drying is attractive for a wide range of applications spray drying is a unique unit operation in which powders are produced from a liquid feed in a single processing step. Key component of the process are atomizer, spray chamber. Design of spray chamber should be based on the atomizer type, the production rate, and the particle size required. Because of the complex processes taking place during spray drying, traditional design method are based on pilot-plant tests and empirical scale-up rules. Modern technique such as CFD have a role to play in design and troubleshooting.

• BMB Reports
• /
• v.45 no.8
• /
• pp.427-432
• /
• 2012

Primary cilia, single hair-like appendage on the surface of the most mammalian cells, were once considered to be vestigial cellular organelles for a past century because of their tiny structure and unknown function. Although they lack ancestral motility function of cilia or flagella, they share common ground with multiciliated motile cilia and flagella on internal structure such as microtubule based nine outer doublets nucleated from the base of mother centrioles called basal body. Making cilia, ciliogenesis, in cells depends on the cell cycle stage due to reuse of centrioles for cell division forming mitotic spindle pole (M phase) and assembling cilia from basal body (starting G1 phase and maintaining most of interphase). Ciliary assembly required two conflicting processes such as assembly and disassembly and balance between these two processes determines the length of cilia. Both process required highly conserved transport system to supply needed substance to grow tip of cilia and bring ciliary turnover product back to the base of cilia using motor protein, kinesin and dynein, and transport protein complex, IFT particles. Disruption of ciliary structure or function causes multiple human disorder called ciliopathies affecting disease of diverse ciliated tissues ranging from eye, kidney, respiratory tract and brain. Recent explosion of research on the primary cilia and their involvement on animal development and disease attracts scientific interest on how extensively the function of cilia related to specific cell physiology and signaling pathway. In this review, I introduce general features of primary cilia and recent progress in understanding of the ciliary length control and signaling pathways transduced through primary cilia in vertebrates.

• Advances in Energy Research
• /
• v.7 no.1
• /
• pp.35-52
• /
• 2020

The paper proposes a hybrid approach of artificial bee colony (ABC) and grey wolf optimizer (GWO) algorithm for multi-objective and multidimensional engine optimization of a converted plug-in hybrid electric vehicle. The proposed strategy is used to optimize all emissions along with brake specific fuel consumption (FC) for converted parallel operated diesel plug-in hybrid electric vehicle (PHEV). All emissions particulate matter (PM), nitrogen oxide (NOx), carbon monoxide (CO) and hydrocarbon (HC) are considered as optimization parameters with weighted factors. 70 hp engine data of NOx, PM, HC, CO and FC obtained from Oak Ridge National Laboratory is used for the study. The algorithm is initialized with feasible solutions followed by the employee bee phase of artificial bee colony algorithm to provide exploitation. Onlooker and scout bee phase is replaced by GWO algorithm to provide exploration. MATLAB program is used for simulation. Hybrid ABC-GWO algorithm developed is tested extensively for various values of speeds and torque. The optimization performance and its environmental impact are discussed in detail. The optimization results obtained are verified by real data engine maps. It is also compared with modified ABC and GWO algorithm for checking the effectiveness of proposed algorithm. Hybrid ABC-GWO offers combine benefits of ABC and GWO by reducing computational load and complexity with less computation time providing a balance of exploitation and exploration and passes repeatability towards use for real-time optimization.

• Journal of Institute of Convergence Technology
• /
• v.4 no.2
• /
• pp.47-50
• /
• 2014

Voloxidation is a process for converting $UO_2$ into $U_3O_8$ while removing some volatile products in spent fuels (SF). Various oxidative gas conditions including air and mixture of Ar and $O_2$ could be adopted for the process. The gas flows into a reactor under high temperature ($>500^{\circ}C$) and components of SF are reacted with the gas. SF is composed of various components such as actinides, lanthanides, and alkali metals. Therefore, it is of significance to understand their behavior during the reactions for process development. However, due to the limit of available experiments, phase diagram analysis should be preceded. TPP diagram is constructed with respect to temperature-pressure-pressure. It shows a stable phase depending on partial pressures of gas components as well as temperature. In this work, we investigated TPP diagrams for actinides, lanthanides and other oxides to determine stable oxide forms under different gas conditions. The results would be used to set up a material balance under a pyroprocessing scheme of SF and compare the gas conditions for the optimization of fission products removal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1210-1218
• /
• 2001

In this paper, A X-band voltage-controlled hair-pin resonator oscillator(VCHRO) is able to a local oscillator or a signal source in transmitter/receiver of a microwave communication system for mobile radar, is designed and fabricated In order to apply mobile radar system is used the hair-pin resonator stronger on shock or vibration than the dielectric resonator, and also, in order to improvement the phase noise and output power is used a system of serial feedback format A hair-pin resonator was simulated by momentum method of HP ADS and then a oscillator circuit was designed that operates at 10.525 GHz by nonlinear method in harmonic balance simulation. The HRO generated output power of 6.93 dBm at 10.525 GHz, phase noise of -57.74 dBc at 100 kHz offset from carrier and the 2'nd harmonic was suppressed -23.90 dBc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.7
• /
• pp.713-718
• /
• 2008

A modified broad-band ring hybrid balun with additional two shorted $\lambda$/4 stubs is proposed. The proposed balun is a modified version which has additional two shorted $\lambda$/4 stubs to compensate phase and amplitude imbalances of conventional ring hybrid coupler. To demonstrate the validity of the proposed balun, a balanced Schottky-diode frequency doubler is designed and measured. Measurement data show that the proposed frequency doubler has around 10 dB conversion loss and more than 30 dB fundamental suppression over an input range of $1.6{\sim}2.35\;GHz$.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.3
• /
• pp.95-102
• /
• 2011

A model of solid-water-air coupling in triphasic mixture is compared to that of solid-water coupling in biphasic mixture with an application to partially saturated soils. Based on thermodynamics, the mathematical framework governing the behavior of a partially saturated soil is derived by using balance equations, and numerical implementation through drainage experiment of a sand column is carried out to validate the obtained formulations. The role of the air phase in the hydro-mechanical behavior of triphasic mixture can be analyzed from the interaction among phases and from the solid skeleton's constitutive behavior, and the three-phase model found applications in geotechnical engineering problems, such as $CO_2$ sequestration and air storage in an aquifer.

• Journal of Korean Medical classics
• /
• v.23 no.1
• /
• pp.1-10
• /
• 2010

Wi Syndrome(痿證) mainly occurs from fluid damages[津液損傷] caused by heat in Gi(氣) phase of the Five viscera, while it sometimes come from the outside. Although the symptoms are presented in the limbs, the disorder roots in the Five viscera, most deeply located in the human body, Therefore, to approach the disorder, we must apply differentiation of the Five viscera in diagnosis. The Lungs, as the head of the Five viscera control the production and distribution of bodily fluids in the body. Functional disorder of the Lungs bring about Wi Syndrome regardless of it being in the Gi phase. Also, psychological depression leads to Wi Syndrome, In other words, depression and uneasiness easily results in the state of Gi blocking and fluid exhaustion in this modern society where there is less manual labor and excessive use of the brain. Besides Gi blockage, the top muscle[宗筋] theory is another important mechanism in the occurrence of Wi Syndrome. Moreover, the disorder is related to Yangmyeong(陽明), which is the sea of food, Chungmaek(衝脈) which is the sea of meridian, in addition to Immaek(任脈), Dokmeak (督脈) and Deameak(帶脈) which are all involved in Wi Syndrome. In conclusion, the Wi Syndrome happens when various factors involved lose balance and harmony with each other.

• Nuclear Engineering and Technology
• /
• v.37 no.3
• /
• pp.287-292
• /
• 2005

[ $\pi$ ]The effects of silica-based additives have been investigated to improve the creep property of a $UO_2$ pellet. The additive composition, $50wt\%SiO_2-47wt{\%}CaO-3wt\%Cr_2O_3$ (SCC), was selected according to the dihedral angle and the distribution of the second phase. It was observed that the creep rate of the $0.07 wt\%$ SCC-added $UO_2$ was slower than that of the pure $UO_2$. However, the creep rate of the $0.22 wt\%$ SCC-added $UO_2$ was about 3_48 times faster than that of the pure $UO_2$, depending on the applied stress in the lower stress range. In the case of the $0.35 wt\%$ SCC-added $UO_2$, the creep rate decreased in comparison with that of the $0.22 wt\%$ SCC-added $UO_2$. The observed enhancement in the creep rate might depend on a balance between the positive role of the viscous intergranular phase and the negative roles of the additives and the grain growth.