• Journal of Information Technology Applications and Management
• /
• v.15 no.2
• /
• pp.51-65
• /
• 2008

The purpose of this paper is introducing WiFi based EKF(Extended Kalman Filter) method for indoor positioning. The advantages of our EKF method include: 1) Any special equipment dedicated for positioning is not required. 2) implementation of EKF does not require off-line phase of fingerprinting methods. 3) The EKF effectively minimizes squared deviation of the trilateration method. In order to experimentally prove the advantages of our method, we implemented indoor positioning systems making use of the K-NN(K Nearest Neighbors), Bayesian, decision tree, trilateration, and our EKF methods. Our experimental results show that the average-errors of K-NN, Bayesian and decision tree methods are all close to 2.4 meters whereas the average errors of trilateration and EKF are 4.07 meters and 3.528 meters, respectively. That is, the accuracy of our EKF is a bit inferior to those of fingerprinting methods. Even so, our EKF is accurate enough to be used for practical indoor LBS systems. Moreover, our EKF is easier to implement than fingerprinting methods because it does not require off-line phase.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.05a
• /
• pp.104.1-104.1
• /
• 2004

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.74-77
• /
• 2005

Most of the loads in industrial power distribution systems are balanced and connected to three power systems. However, voltage unbalance is generated at the user's 3-phase 4-wire distribution systems with single & three phase. Voltage unbalance is mainly affected by load system rather than power system. Unbalanced voltage will draws a highly unbalanced current and results in the temperature rise and the low output characteristics at the machine. It is necessary to analyse correct voltage unbalance factor for reduction of side effects in the industrial sites. Voltage unbalance is usually defined by the maximum percent deviation of voltages from their average value, by the method of symmetrical components or by the expression in a more user-friendly form which requires only the three line voltage readings. If the neutral point is moved at the 3-phase 4-wire system by the unbalanced load, by the conventional analytical method, line and phase voltage unbalance leads to different results due to zero-sequence component. This paper presents a new analytical method for phase and line voltage unbalance factor in 4-wire systems. Two methods indicate exact results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3C
• /
• pp.149-156
• /
• 2011

MIMO-OFDM(Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing) has been spotlighted as a solution of high-quality service for next generation's wireless communications. However, like OFDM, one of main problems of MIMO-OFDM is the high PAPR(Peak-to-Average Power Ratio). In this paper, an adaptive P-SLM(Partitioned-SeLetive Mapping) based on new phase sequence is proposed to reduce PAPR. The proposed method has better performance and lower complexity than conventional method due to the use of periodic multiplication and adaptability by fixed critical PAPR value. Simulation results show that the proposed method has better performance and lower complexity than conventional method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1065-1072
• /
• 2006

An OFDM(Orthogonal Frequency Division Multiplexing) system has the problem of the PAPR(Peak-to-Average Power Ratio) due to the overlapping phenomena of many sub-carriers. The previously proposed GA-SPW(Genetic Sub-block Phase Weighting) method not only improved the reduction of PAPR as the number of sub-blocks increases in an OFDM symbol but also decreased the number of calculations involved in the iterative phase searching yields to depend on the number of population and generation by using genetic algorithm not on the number of sub-blocks and phase elements. In this paper, we propose the modified GA-SPW method in order to improve the performance and to decrease the complexity. It is shown that the proposed modified GA-SPW method achieves the significant performance and the reduction of search complexity comparing to the ordinary technique, iterative flipping and previously proposed GA-SPW by the experimental results and analysis.

• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1338-1348
• /
• 2017

In this study, a modified ripple correlation control (RCC) maximum-power point-tracking (MPPT) algorithm is proposed for a single-stage single-phase voltage source inverter (VSI) on a grid-connected photovoltaic system (GCPVS). Unlike classic RCC methods, the proposed algorithm does not require high-pass and low-pass filters or the increment of the AC component filter function in the voltage control loop. A simple arithmetic mean function is used to calculate the average value of the photovoltaic (PV) voltage, PV power, and PV voltage ripples for the MPPT of the RCC method. Furthermore, a high-accuracy and high-precision MPPT is achieved. The performance of the proposed algorithm for the single-stage single-phase VSI GCPVS is investigated through simulation and experimental results.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.248-257
• /
• 2005

In this paper, we develop design procedures for carrier tracking loop for orthogonal frequency division multiplexing (OFDM) systems or other systems of blocked data. In such communication systems, phase error measurements are made infrequent enough to invalidate the traditional loop design methodology which is based on analog loop design. We analyze the degradation in the OFDM schemes caused by the tracking loop and show how the performance is dependent on the rms phase error, where we distinguished between the effect of the variance in the average phase over the symbol and the effect of the phase change over the symbol. We derive the optimal tracking loop including optional delay in the loop caused by processing time. Our solution is general and includes arbitrary phase noise apd additive noise spectrums. In order to guarantee a well behaved solution, we have to check the design against margin constraints subject to uncertainties. In case the optimal loop does not meet the required margin constraints subjected to uncertainties, it is shown how to apply a method taken from control theory to find a controller. Alternatively, if we restrict the solution to first or second order loops, we give a simple loop design procedure which may be sufficient in many cases. Extensions of the method are shown for using both pilot symbols and data symbols in the OFDM receiver for phase tracking. We compare our results to other methods commonly used in OFDM receivers and we show that a large improvement can be gained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.583-591
• /
• 2008

OFDM (orthogonal frequency division multiplexing) has serious problem of high PAPR (peak-to-average power ratio). Recently, CI/OFDM (carrier interferometry OFDM) system has been proposed for the low PAPR. However, CI/OFDM system shows another problem of ICI because of phase offset mismatch due to the phase noise. In this paper, to simultaneously reduce the PAPR and ICI effects, we propose an A-CI/OFDM (advanced-CT/OFDM). This method improves the BER performance by use of the margin of phase offset at CI codes. Propose system to reduce the effect the phase noise, even though it shows a little bit higher PAPR than conventional CI/OFDM, so we apply the PTS among the PAPR reduction techniques to proposed system to mitigate this problem. Therefore, it improves the total BER performance because the proposed method can decrease the effect of phase noise and get the gain in PAPR reduction performance. From the simulation results, we can show the performance comparison between the conventional OFDM, CI/OFDM and A-CI/OFDM.

• Korean Journal of Veterinary Service
• /
• v.19 no.2
• /
• pp.163-171
• /
• 1996

This study was carried out to determination of carbadox and olaquindox residues in swine tissues by MSPD(matrix solid phase disperse)method. The results obtained were as follows ; 1. Optimal wavelengths of UV for carbadox and olaquindox were 310 and 370nm, respectively 2. Ethyl acetate-Acetonitrile(8:2) was found to be adequate as extractant in this method. 3. The average overall recovery of carbadox at the 0.01, 0.05, and 1.0PPM spike levels was 89. 2% and that of olaquindox was 89.9%, and the detection limits were 0.5ng for carbadox and olaquindox.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.117-126
• /
• 2005

In this paper, we present a new method for the reduction of the PAPR (peak to average power ratio) of OFDM signals. The idea behind the proposed method is that IFFT is implemented often with software for a digital signal processor such that we may avoid the repeated calculations to reduce the computational operations: we define sub-sequences in the IFFT process and then multiply the optimum phase rotation factors to them to minimize the PAPR. The PAPR reduction performance of the proposed method is equal to that of the interleaved partition scheme of the PTS (partial transmit sequence) method with only 1/3 computational operations of it.