• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.569-576
• /
• 2023

An agricultural drones are gradually increasing in utilization due to economic efficiency, and consist of a main frame in charge of flying spray system in charge of moving pesticide to control targets. Therefore, the environment and characteristics of crops should be considered when controlling pesticides using drones and conditions such as systematic flying altitude of flight, speed, and spray time should be changed accordingly. However, pest control work using agricultural drones has different spray effects depending on level the operation proficiency and spray impact. In addition, there are variations in operating standards and control efficiency for agricultural drones, which hinder the distribution of agricultural control drones in the field of pest control work. Therefore, this study attempts to identify the spraying characteristics of agricultural drones, apply the effective spraying time, interval and experimentally verify the system that can calculation of spray area compared to previous studies. Through this experimental verification, it is intended to apply the optimal control process by minimizing the obstacles to pest control work by applying the operation method and systematic figures to agricultural drones.

• Journal of Convergence for Information Technology
• /
• v.9 no.10
• /
• pp.108-113
• /
• 2019

In relation to $4^{th}$ industrial revolution, it is required to build a smart agricultural system using the pest control drones, which are emerging fast these days as a role to support pest control work of farmers and improve aging issues in farming. However, the absence of accurate criteria on management of the pest control drones and the effect of pesticide application is leading to damage to crops by pesticides. The extreme shortage of analysis of management of the pest control drones and relevant studies, and big differences in pest control efficiency depending on the operation skills of controllers are the biggest reasons for the damage. Therefore, this paper suggests a basic study on agricultural pest control drone operation system buildup to make out working schedules and calculate the dosage of pesticide by understanding the features of the pest control drones properly based on the control using smart operating mode.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.4
• /
• pp.193-198
• /
• 2021

Recently, interests in the 4th industry have increased the level of demand for pest control by farmers in the field of rice farming, and the interests and use of agricultural pest control drones. Therefore, the diversification of agricultural control drones that spray high-concentration pesticides and the increase of agricultural exterminators due to the acquisition of national drone certifications are rapidly developing the agricultural sector in the drone industry. In addition, as detailed projects, an effective platform is required to construct large-scale big data due to pesticide management, exterminator management, precise spraying, pest control work volume classification, settlement, soil management, prediction and monitoring of damages by pests, etc. and to process the data. However, studies in South Korea and other countries on development of models and programs to integrate and process the big data such as data analysis algorithms, image analysis algorithms, growth management algorithms, AI algorithms, etc. are insufficient. This paper proposed an online drone pest control management information platform to meet the needs of managers and farmers in the agricultural field and to realize precise AI pest control based on the agricultural drone pest control processor using drones and presented foundation for development of a comprehensive management system through empirical experiments.

• The Plant Pathology Journal
• /
• v.29 no.3
• /
• pp.294-304
• /
• 2013

To improve the integrated pest management (IPM) of hot pepper, field study was conducted in Hwasung from 2010 to 2012 and an IPM system was developed to help growers decide when to apply pesticides to control anthracnose, tobacco budworm, Phytophthora blight, bacterial wilt, and bacterial leaf spot. The three field treatments consisted of IPM sprays following the forecast model advisory, a periodic spray at 7-to-10-day intervals, and no spray (control). The number of annual pesticide applications for the IPM treatment ranged from six to eight, whereas the plots subjected to the periodic treatment received pesticide 11 or 12 times annually for three years. Compared to the former strategy, our improved IPM strategy features more intense pest management, with frequent spraying for anthracnose and mixed spraying for tobacco budworm or Phytophthora blight. The incidences for no pesticide control in 2010, 2011, and 2012 were 91, 97.6, and 41.4%, respectively. Conversely, the incidences for the IPM treatment for those years were 7.6, 62.6, and 2%, and the yields from IPM-treated plots were 48.6 kg, 12.1 kg, and 48.8 kg. The incidence and yield in the IPM-treated plots were almost the same as those of the periodic treatment except in 2011, in which no unnecessary sprays were given, meaning that the IPM control was quite successful. From reviewing eight years of field work, sophisticated forecasts that optimize pesticide spray timing reveal that reliance on pesticides can be reduced without compromising yield. Eco-friendly strategies can be implemented in the pest management of hot pepper.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.1
• /
• pp.133-143
• /
• 2018

In spite of the growing importance of landscaping trees, the rate of flawed and withered trees damaged by pest, disease, drought or frost is increasing. In order to evaluate the performance of the Tree Protective Pad, which are developed to reduce the failure ratio in landscape planting, the tree protective pad for 'digging', 'pest controlling', and 'insulating' are tested based on the five functional criteria; moisturizing effect, wither preventive effect, pest and disease control, thermal effect, tensile strength, and environmental performance. The result of this study is as follows. The moisturizing effect of the tree protective pad for digging is found to be outstanding. According to the result of testing the pad on trees, in particular, it is better than jute tape in wither preventive effect, which means it is expected to prevent flaw and wilt from planting during the improper seasons like summertime. The experiment of installing the protective tree pad for pest controlling to the trunk of Quercus mongolica shows that preventive effect of the pad from diseases and insects is superior, and it also has economical effect by reducing the use of agricultural chemicals. The comparative test of the pad for insulating and jute tape proves that the temperature of the pad is about $2^{\circ}C$ higher than outside. The rate of tensile strength and biodegradation of the pad exceeds the optimal level, so it is revealed that the pad may be the work efficient and environment-friendly product. Likewise, by timely irrigating trees, the tree protective pad economically prevents trees from pest, disease,drought or frost, which may be caused by improper seasonal or delayed planting. As a means of reducing the flaw and facilitating the growth of trees, the exceptional performance of the pad is expected to effectively used in landscape planting and management.

• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.351-360
• /
• 2003

This study was carried out to settle the plugging problem which occurs frequently when agricultural wettable powder is used in pest control work using the crushing and the dispersing effects caused by irradiation of ultrasonic wave. Sonication was applied to the wettable powder suspension in a beaker for 30 seconds using a 28 kHz, 200 W PZT BLT, and the image of suspension before and after sonication was observed using a microscope and a SEM. The image of tow commercial wettable powder suspensions in water observed using an optics microscope showed that the agglomerated particles were irregularly distributed over the whole observed region when stirred mechanically, while showing more uniform distribution composed of comparatively single particles in the whole observed region after sonication. Concerning the above, the projected areas of particles in the four suspensions after sonication were decreased distinctively in the observed range of the microscope and the atomization of crystals was much developed. Over the measured range of 5.6∼4,157 ${\mu}$m particle size, the overall projected area of particles was decreased to 58.3∼89.6% on the average after sonication. When the SEM images of sonicated wettable powder suspensions dissolved in water and CH$_3$OH were compared to the suspensions before sonication, such phenomena as the atomization of particles, the expansion of voids between particles, the reduction and the decrease of agglomerated particle groups, and the progress of crack developments on the surface of flake-shaped particles were observed. It seemed possible that the plugging problem that occurs frequently in pest control machine when using wettable powder would be settled by the use of sonication.

• Korean journal of applied entomology
• /
• v.47 no.1
• /
• pp.107-110
• /
• 2008

Tropical fire ant, Solenopsis geminata (Fabricius) is distributed over the tropical and temperate areas. It is a polyphagous pest attacking to various plant and causes the pain to the people doing outdoor work. So it is known for a hygienic pest to human being, especially the people doing outdoor activities. It can cause severe pain to human, even with just a bite. Of particular concern is the possibility of its settlement in this country, if it invade to the farmlands and/or forests of Jeju Island and southern part in Korea. It is listed as a regulated pest in Plant Quarantine Act of Korea. This ant is usually imported through a ship and early settled in the port area where it is already distributed. Recently its distribution is rapidly spreading into Southeast Asia and southern part of China. In Korea, it was detected the one time in 1990s, but was detected the ten times from 2000 to 2006 by an imported plant quarantine process. Therefore, we would like to provide some information on the species, including morphology, distribution, host plant, damaged symptom and its general bionomics, which will be useful data for plant quarantine process and control.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.318-325
• /
• 2019

Recently, research and development on agricultural robots have been on the rise as the interest in smart farming has increased. Robots used in smart greenhouses should be taken into account with the working characteristics and growing environment. This study examined cleaning robots developed through the environmental analysis of smart greenhouses. This study assessed the evaluation method considering the requirements of the pest control robot applicable to the smart greenhouse. The performance and quality assessment criteria were established to conduct tests through the requirements of robots. The required functions and goals of the pest control robot were derived by referring to the robot-related standards. A driving and working ability test was conducted to assess the performance of the robot. The driving test was conducted on the driving performance of the robot and the work capability was tested on the pest control performance. In addition, a durability test was conducted to assess the quality of the robot. The required factors for smart greenhouse robots were derived from the test results. The study results are expected be a standard for an evaluation of a variety of robots for applications to smart greenhouses.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.30 no.1
• /
• pp.26-30
• /
• 2015

Tropical Tasar culture is forest and agro-based activity that covers agricultural and industrial activity. Tasar silk is produced by the silkworm, Antheraea mylitta which is polyphagous in nature. A large number of pests are reported to attack both the host plant as well as silkworm. As the rearing is conducted outdoor silkworms are exposed to attack of various pests during their life cycle. Eocanthecona furcellata (Hemiptera: Pentatomidae) is the major predator of tasar silkworm during young age rearing. Both nymphs and adults of the stink bug suck the heamolymph of silkworm leading to death. The present work was undertaken to study the life cycle of E. furcellata on larvae of vapourer tussock moth which is a major pest of tasar host plants. The incubation period, nymphal duration and total developmental period from egg to adult was $8.0{\pm}0.45d$, $16.0{\pm}3.24$ and $22.0{\pm}4.20d$, respectively. Pre-oviposition, oviposition and longevity of male and female stink bug was $3.20{\pm}0.38$, $17.60{\pm}1.86$, $42.40{\pm}1.94$, $37.00{\pm}3.18d$, respectively. Analysis of the data revealed no significant difference in life cycle of the predator when provided silkworm and vapourer tussock moth larvae as hosts. Which clearly indicates that E. furcellata can multiply on vapourer tussock moth larvae during non rearing periods. Adoption of recommended pest control measures for defoliators of tasar host plants during non-rearing periods will help in reducing the incidence of host plant pests and also in reducing the incidence of stink bug during rearing season. During the study it was also observed that larvae semilooper, boll headed caterpillar and nymphs of leaf hopper serve as alternate/secondary hosts to E. furcellata during non rearing seasons.

• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.817-828
• /
• 2023

Deteriorating soil physical properties and increasing soil pathogens due to the continuous cultivation of field crops are the leading causes of productivity deterioration. Crop rotation, soil heat treatment, and chemical control are used as pest control methods; however, each has limitations in wide application to domestic agriculture. In particular, chemical control requires improvement due to direct exposure to sterilizing solution, odor, and high-intensity work. To improve the overall domestic agricultural environment, the problems of time and cost, such as field maintenance and cultivation scale, must be addressed; therefore, mechanization technology for chemical control must be secured to derive improvement effects in a short period. Most related studies are focused on the control effect of the DMDS (dimethyl disulfide) sterilizer, and research on the performance of the sterilization spray device has been conducted after its introduction in Korea, but research on the corrosion suitability of the material is lacking. This study conducted a corrosion test to secure the corrosion resistance of a soil sterilizer injection pump, and a mechanical failure mode by corrosion by the material was established. The corrosion test comprised operation and neglect tests in which the sterilizing solution was circulated in the pump and remained in the pump, respectively. As a result of the corrosion test, damage occurred due to the weakening of the mechanical strength of the graphite material, and corrosion resistance to aluminum, stainless steel, fluororubber, and PPS (polyphenylene sulfide) materials was confirmed.