• 한국CDE학회논문집
• /
• 제21권3호
• /
• pp.215-223
• /
• 2016

The low price around 1000 USD makes consumer 3D printers as a new additive manufacturing platform for the personal manufacturing where consumers can make and sell their own products. To allow the consumers to design and manufacture their products, not only economic 3D printers but also supporting information systems for their design and manufacturing are essential. This study suggests an extended product data management (PDM) system that can support both the design and manufacturing of personal products with consumer 3D printing services. This extended PDM system helps consumer designers use advanced PDM technologies for their design and connected 3D printing services with Internet of Things (IoT) technology for realization of their products. As a result, the proposed system supports the consumer designers a seamless integrated product development and manufacturing environment supported by PDM and consumer 3D printing services.

• 한국산업보건학회지
• /
• 제23권2호
• /
• pp.57-64
• /
• 2013

Objectives: Skin exposure to diisocyanates may be an important risk factor for respiratory sensitization to leading asthma. However little is known about the extent of worker's diisocyanates skin exposure and the effectiveness of personal protective equipments in polyurethane foam manufacturing companies. This study provides data on diisocyanates skin exposure, surface diisiocyantes contamination of foams and the effectiveness of personal protective gloves in five polyurethane foam manufacturing companies. Materials and methods Colorimetric SWYPE pads are used for the determination of diisocyanates on surfaces of workers skin and polyurethanes foams. Results: The forearms, necks and faces of workers in polyurethane foam manufacturing companies were found to be contaminated with diisocyanates. Heavy contamination with uncured diisocyanates at large block foams surfaces were found. Personal gloves of workers for skin protection showed significant penetrations by diisocyanates. Conclusions: We found that all workers in polyurethane foam manufacturing companies could be exposed to diisocyanates by skin exposure. Also further researches which would better quantify skin exposure are needed.

• 한국의류산업학회지
• /
• 제1권2호
• /
• pp.148-153
• /
• 1999

The purpose of this study was to manufacturing of personal dress form by replica method for draping. The objects were physical body and personal dress form of their torso somatotype. Comparing the measurements of Martin method and of sliding gauge method to examine the fitness of dress form. Dress form was found bigger than physical body. This was due to the transformation in processing that wrap a Suck-Go bandage and pack a polyurethane foam. On the basis of the result, manufacturing of personal dress form and foundation by draping, it was wearing done test on the physical body, through the procedure that investigate the possibility of usage and the manufacture of personal dress form.

• Asia pacific journal of information systems
• /
• 제5권1호
• /
• pp.236-257
• /
• 1995

Not much attention has been paid to the characteristics of successful MIS in small business in Korea. This study compares the characteristics of successful MIS with those of less successful MIS of manufacturing industry in Korea in terms of micro level, macro level, and personal level. The micro level consists of those variables relating to the system development and maintenance while the macro level consists of the environmental variables relating to the information systems. The personal level measures a personal EDP experience. A mail survey was sent to small manufacturing companies to collect the data for the hypothesis tests. And 81 usable questionnaires were returned for data analysis. This study performs the validity of the categorization of variables in terms of three levels. The results shows that this categorization is appropriate but the personal level. As the personal experiences of EDP in Korea used to come up with those of the organization, the variables in the personal level have high correlations with those in the macro level in empirical testing. As the personal level, however, is different dimension from the macro level in theoretical aspect, the level is maintained separately throughout the study. The data were analyzed with MANOVA and two group discriminant analysis. The analyses reveal that the characteristics of successful MIS are different from those of less successful MIS in terms of three levels. And the micro level is more important than the macro level to develop successful MIS. That is because the organizations have relatively few experience in dealing with information systems, they have not developed unique information systems which are adjusted to their organizational characteristics. Those findings seems to be important determinants of success for the MIS in a firm.

• 대한임상검사과학회지
• /
• 제41권2호
• /
• pp.67-75
• /
• 2009

In order to provide basic data for the prevention of adverse effects of lead on health, we examined lead levels in the blood of 30 handicapped workers employed in manufacturing electronic components in Seoul from 2002 to 2008. The average lead level in the blood of all the subjects was $4.79{\pm}4.32{\mu}g/dL$ in females, $2.64{\pm}2.31{\mu}g/dL$ in males, and $3.88{\pm}3.75{\mu}g/dL$ in total. Lead levels examined in this study were significantly lower than other investigators study have reported. The average lead level from personal exposure of the subjects was $1.44{\pm}0.91mg/m^3$ in the workplace. The relation between blood lead levels and personal exposure was a simple linear regression; it's equation was "Lead level in blood = 6.04 - 1.92 lead level by personal exposure".

• 한국산업보건학회지
• /
• 제32권1호
• /
• pp.10-20
• /
• 2022

Objectives: The aim of this study is to evaluate exposure levels of the extremely low frequency magnetic fields(ELF-MF) radiated from various electric facilities in Liquid Crystal Display(LCD) manufacturing processes. Methods: This study measured the exposure levels of personal and local ELF-MF for the electronic facilities installed in two LCD manufacturing companies. Samplers were installed around workers' waist during working hours to identify personal exposure levels, and direct reading equipment were located at 3 cm, 10 cm, and 30 cm away from the surface of the electronic facilities to measure local exposure levels. Average and maximum(ceiling) values were calculated for personal and local exposure levels. Results: Average and maximum of personal exposure levels for each worker were 0.56(mean) ± 0.02(SE) µT and 6.31 ± 0.75 µT, respectively. Statistical analyses of the study found that maximum of the personal exposure levels for engineers was significantly higher than that for operators since engineers spend more time near the electronic facilities for repairing. The range of maximum personal exposure levels was 0.50 ~ 43.50 µT and its highest level was equivalent to 4.35 % of ACGIH(American Conference of Governmental Industrial Hygienists) exposure limit value(1 mT). Maximum of local exposure levels was 8.18 ± 0.52 µT and the electronic facilities with higher exposure levels were roof rail and electric panel, which were not related to direct manufacturing. The range of maximum local exposure levels was 0.60 ~ 287.20 µT and its highest level was equivalent to 28.7 % of the ACGIH exposure limit value. Lastly, the local exposure levels significantly decreased as the measurement distance from the electronic facilities increased. Conclusions: Maximum of personal and local exposure levels did not exceed the exposure limit value of ACGIH. However, it is recommended to keep the workers as far as possible from the sources of ELF-MF.

• 품질경영학회지
• /
• 제24권2호
• /
• pp.113-127
• /
• 1996

A various quality data are produced during nuclear fuel fabrication. In order to control quality data efficiently, Computerization of Quality Information System(QIS) using personal computer was established. Database control software and analysis software were developed for QIS. QIS was applied the fuel manufacturing and quality inspection. Quality trend analysis, process control, process capability and quality history docket for nuclear fuel manufacturing were performed by QIS. Through the Quality Information System, quality assurance, quality control, process control and manufacturing engineering were performed efficiently in nuclear fuel manufacturing.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.205-208
• /
• 2002

The vericut is one of the best CAM application for manufacturing data verification system. It is much applied in most manufacturing company for checking the manufacturing work. Using it a off-line manufacturing system is connected for on-line working on local area network. First, we choose the serial communication to chain an off-line manufacturing system and a personal computer which link with the server running the vericut.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.53-60
• /
• 2022

In this study, the conceptual design and performance evaluation of a personal air vehicle (PAV) is presented, which is a potential futuristic individual transportation. The blade element theory (BET) is employed to compute a rotational velocity. A computational fluid dynamics (CFD) simulation is performed to investigate the difference in the thrust performance in the rotor axis distance of a quad-copter PAV in hovering. Modal analysis is performed to create a Campbell diagram to investigate critical speed. Consequently, a quad-copter PAV changes the aerodynamics thrust and critical velocity according to the rotor axis distance.

• 한국직업건강간호학회지
• /
• 제8권2호
• /
• pp.141-155
• /
• 1999

For the purpose of disclosing the mental health status as well as its stress factors of female workers in industry, a questionaire survey was carried out on 283 female workers, namely. 134 of a service industry(department store) in seoul and 149 of a manufacturing industry(food) in Kyunggi-do district from 24 to 29 January, 1994. The result were as follows : 1. The mean scores of poor mental health indicator showed no significant difference between service industry and manufacturing industry, while the mean scores of good mental health indicator showed a significant difference between those two industries. 2. The mean scores of work stress as social stress factors showed a significant difference between service industry and manufacturing industry. However, no significant difference was observed between the mean scores of personal stress factor between those two industries. 3. In general, the work stress factor was more significantly contributed by marital status, while the social stress as well as the personal stress factor were contributed more by monthly income. 4. The major contributing factor to the poor mental health was the personal stress factor in general, followed by the work stress factor. However, the weight of these two stress factors was reversed according to the type of industries.