• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1749-1754
• /
• 2007

In this paper, we propose a new Intra-body communication system for bio-sensor which is one of applications in PAN(Personal Area Network) using body channel. The communication systems for bio-sensor network usually transmits a lot of data acquired in sensor to the receiver in wrist or waist. So we deign the intra-body modem with high data rate, low power, and small size which are achieved by baseband communication techniques. It is noted that the baseband transmission does not requires any analog IF and RF frontends, and can be operated in lower frequency than bandpass transmission. The proposed modem operates at 10MHz band according to the characteristics of intra-body channel, and shows the capability of 5Mbps data rate at distance of 20cm, with $BER=10^{-5}$. In addition, we implement the modem within $2{\times}2cm$ area.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.549-554
• /
• 2014

Studies on the intelligent vehicles that are converged with IT and vehicular technologies are currently under active discussion. A variety of communication technologies for safety intelligent vehicle services are support. As such intelligent vehicles use communication technologies, they are exposed to the diverse factors of security threats. To conduct intelligent vehicle security authentication solutions, there are some factors that can be adopted ownership, knowledge and biometrics[6,7]. This paper proposes to analyze the factors to threaten intelligent vehicle, which are usually intruded through communication network system and the security solution using biometric authentication scheme. This study proposed above user's biometrics information-based authentication scheme that can solve the anticipated problems with an intelligent vehicle, which requires a higher level of security than existing authentication solution.

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.46-54
• /
• 2015

Communication between ECUs (Electronic Control Units) in agricultural machineries tends to use IS011783 widely, that is PGN (Parameter Group Number) based communication protocol lays on CAN protocol by altering its identifier part. Messages in line are transferred and received between ECUs according to ISO11783 standard. This paper discusses about design of wireless monitoring system. We used an ARM Cortex-M3 microcontroller embedded development board and marvel8686 wireless module. The wireless ISOBUS monitoring system, attached to communication line, reads messages, interpret them, and display them on the screen in easily comprehendible form. It can be used to generate messages and monitor the traffic on physical bus systems. The monitoring system connected to ECUs, monitor and simulate real traffic of communication and functionality of the ECUs. In order to support our work, we have implemented the monitoring tool. The development consists of two parts: GUI of the application and firmware level programming. Hence the monitoring system is attached to the communication line and equipped by Wi-Fi module; farmer/dispatcher in a farm monitors all messages in communication line on personal computer and smart device.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.25-30
• /
• 2015

One of the hottest issues of security is information leakage of financial institution. Financial institutions including commercial banks are frequently threatened by attempts of leakage through hacking and vulnerability, and this information is centered on personal information of their clients. Through this study, I found out that security managers of financial institutions are trying to prevent the leaking of private information, but in fact most of them barely know where their personal information is. Even if they know where it is and trace the data, it is often found in unexpected places. Because there is a lot of waste in time and human resources as search is done manually, we have understood that responding to IT Compliance requires a lot of effort. This study is to improve IT Compliance response and protect information leakage through monitoring PC and servers, the main storage of personal information by automated system, periodically.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.3
• /
• pp.250-261
• /
• 2020

Today, data subjects should be considered to utilize various personal data. To support this paradigm, the concept of "My Data" has proposed and has realized in various industrial sectors, including medial sectors. Based on the concept of the medical My Data, this paper proposes a personal health record (PHR) and an electronic medical record (EMR) data trading model. Particularly, this paper proposes a system model to support the medical My Data environment and relevant procedure among stakeholders for PHR/EMR data trading that ensures the rights of data subjects. Based on the proposed system model, this paper also proposes various mathematical models to analyze the behavior of stakeholders and shows the feasibility of the proposed data trading model that satisfies the requirements of both data subjects and data consumers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.627-633
• /
• 2007

This paper describes position tracking system of a container trailer approaching to a gantry crane for loading or unloading a container into or from a ship, respectively. Proposed position tracking system informs the trailer driver of right position to stop the car under a gantry crane. To measure the location of a trailer, we used Cricket Mote modules which adopted RF and ultrasound technology. We present an elaborate method to improve position errors occurring at sensing and calculate three dimensional position by triangulation along with how to reduce location tracking interval for real-time monitoring. The location information was transmitted to a Personal Digital Assistant (PDA) periodically through Bluetooth communication for guidance of the trailer driver. In indoor and outdoor tests, position errors were less than 3 cm and location tracking interval was 0.5 second on average.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.2
• /
• pp.328-332
• /
• 2006

This study aims to provide definitions and standardization for necessities that elderly people can use conveniently and properly in their daily lives and classify necessities for different purposes. First, standard terminologies were defined by reviewing the literature and the relevant laws related to daily necessities for the elders. Secondly, a concept for necessities for the elders was also defined through consultation with experts. Lastly, the elderly's necessities were selected and classified. The elderly's necessities are defined as aids that ordinary elderly people in normal aging process need for the purpose of the convenience of life and aids they wear or use to maintain or improve their health. In this study, the elderly's necessities are divided into three categories: necessities of health, necessities of Oriental medical aids and necessities of daily living. Each category is further classified as follows: Necessities of health include aids for personal medical treatment, aids for personal care and protection and aids for recreation. Necessities of Oriental medical aids include aids for personal medical treatment, aids for personal care and protection and others. Necessities of daily living include aids for personal care and protection, aids for personal mobility, aids for housekeeping, furnishings, aids for communication, information and signalling, aids for handling products and goods and aids for recreation. The classification of the elderly's necessities in this study can be used as basic information for further studies of demand for necessities for the elderly. The results will lay the foundation for a standardization system for the elderly's necessities and the development of silver industry.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.1
• /
• pp.49-58
• /
• 2011

Recently, GIS(Geographic Information System) has been developed to personalized service for providing the specialized services that is aimed to personal user based on mobile communication. The existing GIS system provides comprehensive and simple information but GIS System for personalized service must provide the adjustive information through the personal interest profile based on POI(PoInt of Interest). This paper describes the intelligent retrieval geographical information service module for providing personal oriented geographic information service. Our proposal model consists of user preference profile, acquisition of POI through hybrid network (Wireless LAN, CDMA), service platform and implementation of prototype system. Implementation model can apply to the life information service like restaurant, oil station, convenient store and etc.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.3
• /
• pp.47-54
• /
• 1996

In this paper, the band pass filter was designed and constructed for personal communication services of information facilities. For the band pass filter design, after dielectric resonator structures were analyzed. J-inverter design theory and its simulation method were studied. The parameters obtained from design theory were practically applied to filter construction. The simulation results are well agreed with the measured result of constructed filter after fine tunings.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.221-228
• /
• 2002

The NAVER is based on a cluster of low-cost personal computers. The goal of NAVER is to provide flexible, extensible, scalable and re-configurable framework for the diverse virtual environments especially for Gamsung research experiments. Personal computers are divided into three servers are according to their specific functions: Render Server, Device Server and Control Server. While Device Server contains external modules requiring event-based communication for the integration, Control Server contains external modules requiring synchronous communication every frame. And, the Render Server consists of 5 managers: Scenario Manager, Event Manger, Command Manager, Interaction Manager and Sync Manager. In this paper, we discuss NAVER as effective distributed system and its application to Gamsung experiment.