• Title/Summary/Keyword: Perovskite-type ceramic membrane

검색결과 10건 처리시간 0.027초

Oxygen Permeation Properties and Phase Stability of Co-Free $La_{0.6}Sr_{0.4}Ti_{0.2}Fe_{0.8}O_{3-{\delta}}$ Oxygen Membrane

  • Kim, Ki-Young;Park, Jung-Hoon;Kim, Jong-Pyo;Son, Sou-Hwan;Park, Sang-Do
    • Korean Membrane Journal
    • /
    • 제9권1호
    • /
    • pp.34-42
    • /
    • 2007
  • A perovskite-type ($La_{0.6}Sr_{0.4}Ti_{0.2}Fe_{0.8}O_{3-{\delta}}$) dense ceramic membrane was prepared by polymerized complex method, using citric acid as a chelating agent and ethylene glycol as an organic stabilizer. Effect of Ti addition on lanthanum-strontium ferrite mixed conductor was investigated by evaluating the thermal expansion coefficient, the oxygen flux, the electrical conductivity, and the phase stability. The thermal expansion coefficient in air was $21.19\;{\times}\;10^{-6}/K$ at 473 to 1,223 K. At the oxygen partial pressure of 0.21 atm ($20%\;O_2$), the electrical conductivity increased with temperature and then decreased after 973 K. The decrement in electrical conductivity at high temperatures was explained by a loss of the lattice oxygen. The oxygen flux increased with temperature and was $0.17\;mL/cm^2{\cdot}min$ at 1,223 K. From the temperature-dependent oxygen flux data, the activation energy of oxygen ion conduction was calculated and was 80.5 kJ/mol at 1,073 to 1,223 K. Also, the Ti-added lanthanum-strontium ferrite mixed conductor was structurally and chemically stable after 450 hours long-term test at 1,173 K.

Synthesis and Characterization of Dense Ceramic Membranes for Methane Conversion - Part II

  • Santos, A.;Fontes, V.A.;Fontes, F.A.Oliveira;De Sousa, J.F.;De Souza, C.P.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.1112-1113
    • /
    • 2006
  • The perovskite- type oxide $(ABO_3)$ containing transition metals on the B-site show mixed (electronic/ionic) conductivity. These mixed-conductivity oxides are promising materials for oxygen permeating membranes. The main objective of this research work is to synthesize and characterization ceramic powders of the Sr-Co-Fe-O system for methane conversion using membrane reactor. SCFO powders were synthesized from the route was based on the complex method of combination of acid EDTA and citrate and shown be available by control efficient of synthesis to performed $SrCo_{0.8}Fe_{0.2}O_{3-\delta$, moreover, it presented easy implementation, reproducibility and operation. Powder ceramic was characterized by XRD, microscopic optic, SEM and TG-DTA.

  • PDF

La0.7Sr0.3Co0.3Fe0.7O3-δ 분리막의 산소투과특성 (Oxygen Permeation Properties of La0.7Sr0.3Co0.3Fe0.7O3-δ Membrane)

  • 손수환;김종표;박정훈;이용택
    • Korean Chemical Engineering Research
    • /
    • 제47권3호
    • /
    • pp.310-315
    • /
    • 2009
  • $La_{0.7}Sr_{0.3}Co_{0.3}Fe_{0.7}O_{3-{\delta}}$ 조성의 페롭스카이트 산화물을 구연산 법으로 합성하였다. 전구물질의 TGA 열분해 분석 결과 $150{\sim}650^{\circ}C$에서 구연산 복합체가 분해되고, XRD 분석결과 $1,000^{\circ}C$ 이후에 순수한 페롭스카이트 구조가 나타났다. 분말을 일축가압 성형 후 $1,300^{\circ}C$로 소결하여 두께 1.6 mm의 치밀한 구조의 분리막을 제작하였다. $La_{0.7}Sr_{0.3}Co_{0.3}Fe_{0.7}O_{3-{\delta}}$의 전기 전도도는 공기분위기에서 $600^{\circ}C$까지는 온도가 증가함에 따라 증가하고, 그 이상의 온도에선 결정 격자로부터의 산소결함 증가에 따라 점차 감소하였다. $700{\sim}950^{\circ}C$ 범위에서 수행된 산소투과실험에서, 투과량은 온도증가에 따라 0.045에서 $0.415ml/cm^2{\cdot}min$로 증가하였으며, 산소투과의 활성화에너지는 89.17 kJ/mol이었다.

혼합전도성 $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ 분리막의 산소투과 특성 (Oxygen Permeation Properties of $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ Mixed-conducting Membrane)

  • 임경태;조통래;이기성;우상국;박기배;김종원
    • 한국세라믹학회지
    • /
    • 제38권9호
    • /
    • pp.787-793
    • /
    • 2001
  • 고상 반응법으로 제조된 $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ 분리막의 소결거동을 살펴보고, 분리막 양면에 산소농도의 차이를 부여하여 산소투과량을 측정하였다. 최적 소결조건에서 제조된 상대밀도 98%의 치밀한 분리막 자체의 산소공공을 통한 혼합전도에 기인해 750$^{\circ}$C∼950$^{\circ}$C의 온도구간에서 산소가 투과되었으며, 850$^{\circ}$C에서 약 0.1ml/$cm^2{\cdot}$min의 투과량을 나타내었다. 안정한 산소 투과량에 도달하기 위해서는 산소투입 후 일정한 시간이 요구되었고, 이러한 산소투과량은 산소부분압의 조절로 제어가 가능하였다.

  • PDF

The Role of Metal Catalyst on Water Permeation and Stability of BaCe0.8Y0.2O3-δ

  • Al, S.;Zhang, G.
    • Journal of Electrochemical Science and Technology
    • /
    • 제9권3호
    • /
    • pp.212-219
    • /
    • 2018
  • Perovskite type ceramic membranes which exhibit dual ion conduction (proton and oxygen ion conduction) can permeate water and can aid solving operational problems such as temperature gradient and carbon deposition associated with a working solid oxide fuel cell. From this point of view, it is crucial to reveal water transport mechanism and especially the nature of the surface sites that is necessary for water incorporation and evolution. $BaCe_{0.8}Y_{0.2}O_{3-{\alpha}}$ (BCY20) was used as a model proton and oxygen ion conducting membrane in this work. Four different catalytically modified membrane configurations were used for the investigations and water flux was measured as a function of temperature. In addition, CO was introduced to the permeate side in order to test the stability of membrane against water and $CO/CO_2$ and post operation analysis of used membranes were carried out. The results revealed that water incorporation occurs on any exposed electrolyte surface. However, the magnitude of water permeation changes depending on which membrane surface is catalytically modified. The platinum increases the water flux on the feed side whilst it decreases the flux on the permeate side. Water flux measurements suggest that platinum can block water permeation on the permeate side by reducing the access to the lattice oxygen in the surface layer.

미세구조에 따른 La0.6Sr0.4Co0.2Fe0.8O3-δ 분리막의 산소투과 및 기계적 특성 (Oxygen Permeation and Mechanical Properties of La0.6Sr0.4Co0.2Fe0.8O3-δ Membrane with Different Microstructures)

  • 이시우;이승영;이기성;우상국;김도경
    • 한국세라믹학회지
    • /
    • 제39권10호
    • /
    • pp.994-1000
    • /
    • 2002
  • 고상 반응법을 통해 $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ 페롭스카이트계 산소투과 분리막을 제조하였으며, 미세구조에 따른 산소투과 특성 및 기계적 특성을 고찰하였다. 분리막의 미세구조는 소결온도 및 소결 유지시간을 달리함으로써 조절하였으며, 미세구조에 따른 평균 입경 및 상대밀도의 변화를 평가하였다. 입계 분율의 감소에 따라 산소투과유속이 증가하는 경향을 나타내었으며, 본 연구에서 고찰한 소결조건 중에서는 1300${\circ}C$에서 10시간 유지하여 제조한, 상대밀도가 높고 비교적 입경이 조대한 분리막 시편의 경우, 최대 0.37 ml/$cm^2$${\cdot}$min의 산소투과유속이 특정되었다. 파괴강도는 소결체의 상대밀도에 의존적이었으며, 파괴인성은 결정립의 크기에 따라 증가하는 경향을 나타내었다.

$La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta}$ 산소 투과 분리막의 제조 및 특성 (Fabrication and Characterization of $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta}$ Oxygen Permeation Membranes Prepared with Different Powders)

  • 임경태;이기성;한인섭;서두원;홍기석;배강;우상국;조통래
    • 한국세라믹학회지
    • /
    • 제38권10호
    • /
    • pp.886-893
    • /
    • 2001
  • 공침법, 구연산법 그리고 고상 반응법을 이용하여 $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta}$ 분말을 합성하고 정수압 성형 후 대기 중에서 소결하여 산소 투과 분리막을 제조하였다. 모든 분말 및 소결체는 페롭스카이트 결정구조를 보였다. 분말의 비표면적은 공침 분말이 가장 높은 값($7.5m^2/g$)을 보였지만 Sr원소의 유실이 일어났고 구연산법은 상대적으로 낮은 밀도를 나타내었다. 고상 반응법은 가장 작은 비표면적을 갖는 분말이 제조되었으나 상대밀도 95%이상의 치밀한 분리막을 제조할 수 있었고 기계적 특성에서도 상대적으로 우수한 성질을 보였다. 특히 6 : 4 : 2 : 8의 몰비의 조성제어가 상대적으로 용이하였다.

  • PDF

${La_{1-x}Sr_{x}B_{1-{\gamma}}Fe_{\gamma}O_{3-{\delta}}$(B=Co, Ga) 페롭스카이트 세라믹 분리막의 제조 및 산소투과특성 (Fabrication and Oxygen Permeation Properties of ${La_{1-x}Sr_{x}B_{1-{\gamma}}Fe_{\gamma}O_{3-{\delta}}$(B=Co, Ga) Perovskite-Type Ceramic Membranes)

  • 임경태;조통래;이기성;한인섭;서두원
    • 멤브레인
    • /
    • 제11권4호
    • /
    • pp.143-151
    • /
    • 2001
  • 고상 반응법을 이용하여 L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ 및 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 분말을 합성하고 혼합전도체 분리막을 소결하여 제조하였다. 제조된 분리막들은 정확한 페롭스카이트 결정구조를 나타내었으며, 95% 이상의 높은 상대밀도를 나타내었다. 산소이온 변환 능력을 향상시키기 위해 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ disk의 양 표면에 L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ paste를 스크린 프린팅 방법으로 코팅하였으며 코팅 막은 비교적 치밀한 미세구조를 나타내었다. 코팅되지 않은 L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ 및 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 분리막과 코팅된 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 분리막의 산소투과 성능을 비교 실험한 결과, 90$0^{\circ}C$에서 L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ 분리막이 정상상태에서 0.266 mL/min.$\textrm{cm}^2$로 가장 많은 투과량을 보였으며 코팅된 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 분리막의 정상상태 산소 투과 유속은 최고 0.19 mL/min.$\textrm{cm}^2$ 정도로 코팅되지 않은 분리막에 비해 약 2~3배로 높게 나타났다.정도로 코팅되지 않은 분리막에 비해 약 2~3배로 높게 나타났다.코팅되지 않은 분리막에 비해 약 2~3배로 높게 나타났다. 높게 나타났다.

  • PDF

La0.7Sr0.3Ga0.6Fe0.4O 분리막의 산소투과특성 및 합성가스의 생성 (Oxygen Permeation and Syngas Production of La0.7Sr0.3Ga0.6Fe0.4O Oxygen Permeable Membrane)

  • 이시우;이승영;이기성;정경원;김도경;우상국
    • 한국세라믹학회지
    • /
    • 제40권6호
    • /
    • pp.594-600
    • /
    • 2003
  • 산소분자를 선택적으로 투과.분리할 수 있는 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 페롭스카이트계 혼합전도성 산소투과 분리막을 제조하였으며, 소결조건에 따라 발현되는 미세구조적 특징을 고찰하였다. He/air 분위기하에서 분리막의 산소투과 유속에 미치는 분리막의 두께 및 표면개질의 영향을 평가하여 속도결정단계에 대하여 논의하였다. 미세구조가 조절된 분리막에 대하여 산소투과유속을 측정함으로써, 입계분율의 증가에 따라 산소투과에 대한 저항이 증가함을 알 수 있었다. 분리막을 통하여 선택적으로 투과된 산소를 이용하여 메탄의 부분산화반응에 의한 합성가스를 생성하였으며, 메탄의 전환율 및 합성가스의 수율을 측정.평가하였다. 기체의 혼합비 및 반응온도의 변화를 통해 합성가스 생성의 적정조건을 선택할 수 있었으며, 600시간의 장기 안정성 시험을 통해, L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 계 산소투과 분리막이 고온의 극심한 환원분위기하에서 안정적으로 사용이 가능한 것으로 판단하였다.