• The Journal of Engineering Geology
• /
• v.18 no.1
• /
• pp.27-36
• /
• 2008

To derive easily the coefficient of permeability from several other soil properties, the estimation model of coefficient of permeability was proposed using linear regression analysis. The coefficient of permeability is one of the major factors to evaluate the soil characteristics. The study area is located in Kangwon-do Pyeongchang-gun Jinbu-Myeon. Soil samples of 45 spots were taken from the study area and various soil tests were carried out in laboratory. After selecting the soil factor influenced by the coefficient of permeability through the correlation analysis, the estimation model of coefficient of permeability was developed using the linear regression analysis between the selected soil factor and the coefficient of permeability from permeability test. Also, the estimation model of coefficient of permeability was compared with the results from permeability test and empirical equation, and the suitability of proposed model was proved. As the result of correlation analysis between various soil factors and the coefficient of permeability using SPSS(statistical package for the social sciences), the largest influence factor of coefficient of permeability were the effective grain size, porosity and dry unit weight. The coefficient of permeability calculated from the proposed model was similar to that resulted from permeability test. Therefore, the proposed model can be used in case of estimating the coefficient of permeability at the same soil condition like study area.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.363-368
• /
• 1997

In this study, permeable polymer concretes using unsaturated polyester (UP) resin with binder contents of 6, 7 and 8%, filler-binder ratios of 0, 0.5, 1.0%, and various sand and aggregate contents are prepared, and tested for compressive and flexural strengths, length change and water permeability. The effects of the mix proportioning factors on the strength properties, length change and coefficient of permeability of the permeable polymer concrete are discussed. From the test results, increase in the compressive strength and decrease in the coefficient of permeability of permeable polymer concrete are clearly observed with increasing filler-binder ratio. The permeable polymer concretes having a compressive strength of 9.4~28.3MPa and a coefficient of permeability of 0.12~1.93 cm/s can be produced in the consideration of the mix proportioning factors.

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.127-134
• /
• 2009

In this paper, an numerical approach is performed to investigate the effects of smear zone, occurred by penetrating vertical drains, on consolidation behavior of soft clay deposits. Such a numerical analysis is applied to the field condition to confirm its applicability. Parametric numerical analyses is carried out to study influencing factors such as permeability in smear zone, boundary of smear zone and discharge capacity of vertical drains on the consolidation of soil. As results of analyses, for the given conditions of soil, degree of consolidation is getting faster with increase of permeability of vertical drain. Degree of consolidation is delayed with decrease of permeability of smear zone. As the ratio of drain width to smear zone increases, the degree of consolidation decreases. Proposed values of influencing factors by previous researchers is found to be reliable from results of numerical analyses with Cam-clay model.

• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.1
• /
• pp.60-64
• /
• 2001

The variability of a ventilated filter cigarette depends on the details of its construction and one properties of its components and the variations in filter ventilation is effected by many factors such as tobacco column pressure drop, filter pressure drop, tipping paper and plug wrap permeability, and vent position. In this study, the effects of combination of tipping paper and plug wrap on filter ventilation of cigarettes were studied for the target ventilation level under the specific tobacco column and filter tip in order to reduce the variation of filter ventilation. When Nicolas Baskevitch\`s equation on filter ventilation was used to try out Monte Carlo Simulation, at the combination where tipping paper permeability is high and plug wrap permeability is low, even the small change in tipping paper and plug wrap permeability showed high variation of target ventilation level. Also, according to the analysis data of filter ventilation in cigarettes designed at the level of 45% filter ventilation by the combinations with tipping paper and plug wrap, the variation in cigarette filter ventilation was increased as increasing tipping paper permeability and decreasing plug wrap permeability. As the results of this study, the variation of filter ventilation can be reduced by increasing plug wrap permeability/tipping paper permeability ratio in the cigarette design, considering 2-3% of tipping paper permeability variation(%CV) and about 10% of plugwrap permeability variation.

• Korean Journal of Radiology
• /
• v.22 no.7
• /
• pp.1152-1162
• /
• 2021

Objective: This study aimed to determine whether there are regional differences in the blood-brain barrier (BBB) permeability of cognitively normal elderly participants and to identify factors influencing BBB permeability with a clinically feasible, 10-minute dynamic contrast-enhanced (DCE) MRI protocol. Materials and Methods: This IRB-approved prospective study recruited 35 cognitively normal adults (26 women; mean age, 64.5 ± 5.6 years) who underwent DCE T1-weighted imaging. Permeability maps (K_trans) were coregistered with masks to calculate the mean regional values. The paired t test and Friedman test were used to compare Ktrans between different regions. The relationships between K_trans and the factors of age, sex, education, cognition score, vascular risk burden, vascular factors on imaging, and medial temporal lobar atrophy were assessed using Pearson correlation and the Spearman rank test. Results: The mean permeability rates of the right and left hippocampi, as assessed with automatic segmentation, were 0.529 ± 0.472 and 0.585 ± 0.515 (K_trans, x 10^-3 min^-1), respectively. Concerning the deep gray matter, the K_trans of the thalamus was significantly greater than those of the putamen and hippocampus (p = 0.007, p = 0.041). Regarding the white matter, the K_trans value of the occipital white matter was significantly greater than those of the frontal, cingulate, and temporal white matter (p < 0.0001, p = 0.0007, p = 0.0002). The variations in K_trans across brain regions were not related to age, cognitive score, vascular risk burden, vascular risk factors on imaging, or medial temporal lobar atrophy in the study group. Conclusion: Our study demonstrated regional differences in BBB permeability (K_trans) in cognitively normal elderly adults using a clinically acceptable 10-minutes DCE imaging protocol. The regional differences suggest that the integrity of the BBB varies across the brains of cognitively normal elderly adults. We recommend considering regional differences in K_trans values when evaluating BBB permeability in patients with neurodegenerative diseases.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.22-31
• /
• 1996

Air permeabilities for both sapwood and heartwood of the three softwoods(Picea jezoensis, Larix gmelini, Pinus sylvestris), imported from the Russian Far East, in the three different structural directions were measured using steady-state rotameter method. After measuring permeability, the liquid absorption into the longitudinal permeability specimens was measured, and then related with the measured permeability. The longitudinal permeability was overwhelmingly greater than the transverse permeability, with the radial direction showing higher permeability than the tangential direction. There appear to be species differences in permeability of the three softwoods. The mean longitudinal sapwood permeability of P. jezoensis(3.300darcy) and P. sylvestris(3.028darcy) were considerably greater(ca. 25times) than that of L. gmelini(0.134darcy). Also the average longitudinal heartwood permeability of P. jezoensis(0.300darcy) was about 10 times as great as that of P. sylvestris(0.029darcy) and L. gmelini(0.024darcy). The average calculated radius of pit openings in the heartwood was $0.101{\mu}m$ for L. gmelini, $0.152{\mu}m$ for P. sylvestris for and $0.703{\mu}m$ for P. jezoensis. Heartwood permeability increases with the increase in radius of pit pore and the decrease in ring width and in extractive content, even though the correlation between permeability and its affecting factors was dependent on species. However, there was an inverse relationship between specific gravity and permeability, showing poor correlation between them. The correlation between air permeability and liquid retention was fairly high, so it was revealed that prediction of liquid absorption into the wood by using permeability was feasible.

• Journal of the Korean Society of Safety
• /
• v.23 no.5
• /
• pp.97-104
• /
• 2008

This study was intended to evaluate the permeable performance through a change of reinforcing materials, curing condition, durability evaluation and permeability test, and to select the reinforcing material which could reduce the durability and water tightness from it, as the study for considering how the change of the outside's environment factors that the concrete structure actually contacted with impacted the concrete's durability especially the permeability by referring to such the background of the study. Accordingly, it was judged that evaluating the permeability by considering the severe environment condition where the concrete structure was placed in was more reasonable than measuring the existing permeability coefficient conducted in the sound state for the permeability evaluation of actually-used concrete structure. In this study, it also could be known that the specimen of hybrid fiber reinforced concrete which mixed the long and short steel fiber was the most effective for water tightness enhancement in severe environmental conditions.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.597-606
• /
• 2019

Due to climate change, coastal areas are being flooded with torrential rain, typhoons, and tsunamis. In addition, non-point source pollutants (NPSs) that accumulated on the ground, streets, and buildings during the dry season are washed off by rain and stormwater runoff, which adds to the damage associated with environmental pollution, e.g., pollution that makes its way into the ocean. Recently, low impact development (LID) has been considered as a means of controlling water circulation and NPSs. In the coastal area, permeable blocks have been constructed mainly to reduce the flood damage caused by waves. Some important design factors that must be considered to ensure long-term performance are the permeability coefficient, clogging, and the efficiency of the removal of total suspended solids (TSS), but currently there are no standardized design criteria or testing techniques that are used worldwide. Herein, we analyzed the permeability coefficient and the TSS removal efficiency tendency according to the permeability area ratio with an easily-detachable, permeable block filled with calcinated yellow soils as the filter media. Our lab-scale tests indicated that, when the permeability area ratio was 25%, the reduction of the permeability coefficient after clogged was 11%, which was a significant decrease compared to other cases. Permeability persistence increased when the permeability area ratio increased from 50% to 75%. The TSS removal efficiency decreased as the permeability area ratio increased. Our pilot-scale test indicated that the TSS removal efficiency was more than 80% higher in all cases. We also found that the permeability persistence was excellent as the permeability area ratio increased, and, in actual construction, it is effective to set 5.3% of the total area as permeable area in terms of permeability and economic feasibility.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.164-170
• /
• 2000

Important factors in a casting mold are strength at the mold surface and gas permeability of the mold. This study investigates the effects of pre-pressure and sand particle hardness on gas permeability, with a constraint that the norm of a stiffness array at the mold surface should be higher than a certain value. The constitutive relation is obtained using a hypoplasticity model. This study is firstly attempted to investigate sand behavior in mold fabrication, and will give a theoretical base for fabricating better molds.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.spc
• /
• pp.19-31
• /
• 2010

Orally administrated drugs permeate the biological membrane by various transport mechanisms. The oral absorption potential is closely related to the physicochemical properties of the drug and interaction with the physiological factors surrounding the site of absorption. Assessment of the drug membrane permeability is an integral part of the early stage drug developmental process. Appropriate selection of the permeability screening method at the right stage of drug development process is important in achieving successful developmental outcomes. This review aims at introducing currently available in vitro and in vivo screening methods for the membrane permeability assessment.