• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.149-152
• /
• 2004

Speed and torque control of PMSM(Permanent Magnet Synchronous Motor) are usually achieved by using position and speed sensors which require additional mounting space, reduce the reliability in harsh environments and increase the cost of a motor. Therefore, many studies have been performed for the elimination of speed and position sensors. In this paper, a novel speed sensorless control of a permanent magnet synchronous motor based on SVMR(Support Vector Machine Regression) is presented. The SVM regression method is an algorithm that estimates an unknown mapping between a system's input and outputs, from the available data or training data. Two well-known different voltage model is necessary to estimate the speed of a PMSM. The validity and the usefulness of proposed algorithm are thoroughly verified through numerical simulation.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권3호
• /
• pp.215-223
• /
• 2005

An electrical machine for a high-speed flywheel for energy storage in large hybrid electric vehicles is described. Design choices for the machine are motivated: it is a radial-flux external-rotor permanent-magnet synchronous machine without slots in the stator iron and with a shielding cylinder. An analytical model of the machine is briefly introduced whereafter optimization of the machine is discussed. Three optimization criteria were chosen: (1) torque; (2) total stator losses and (3) induced eddy current loss on the rotor. The influence of the following optimization variables on these criteria is investigated: (1) permanent-magnet array; (2) winding distribution and (3) machine geometry. The paper shows that an analytical model of the machine is very useful in optimization.

• 전력전자학회논문지
• /
• 제18권5호
• /
• pp.437-442
• /
• 2013

For open-end permanent magnet synchronous machine(PMSM) with dual inverter system, where one inverter is connected to the source and the other is flying, the dc link voltage of the flying inverter can be boosted through the machine. For this reason, when compared with single inverter drive system, higher voltage can be applied to PMSM, and higher torque can be generated in the flux weakening region. In this case, however, active and reactive powers are separately supplied by each inverter to maintain the dc link voltage of flying inverter. Therefore, the required flux weakening control is different from the conventional method for a single inverter drive system. This paper proposes the novel flux weakening control method which maximizes the active voltage component in a dual inverter PMSM drive system. The proposed method was demonstrated and verified through experimental results.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.604-614
• /
• 2012

This paper presents a comparative study of position sensorless control schemes based on back-electromotive force (back-EMF) estimation in permanent magnet synchronous motors (PMSM). The characteristics of the estimated back-EMF signals are analyzed using various mathematical models of a PMSM. The transfer functions of the estimators, based on the extended EMF model in the rotor reference frame, are derived to show their similarity. They are then used for the analysis of the effects of both the motor parameter variations and the voltage errors due to inverter nonlinearity on the accuracy of the back-EMF estimation. The differences between a phase-locked-loop (PLL) type estimator and a Luenberger observer type estimator, generally used for extracting rotor speed and position information from estimated back-EMF signals, are also examined. An experimental study with a 250-W interior-permanent-magnet machine has been performed to validate the analyses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.732-733
• /
• 2015

본 논문에서는 외전형 영구자석 동기전동기(Outer rotor Permanent Magnet Synchronous Motor)의 회전자 형상에 따른 토크특성을 비교하였다. 표면부착형 영구자석(SPM) 형태의 FAN용 PMSM을 설계하고 이 모델을 기준으로 동일한 외경사이즈를 갖지만 더 높은 토크 밀도를 갖는 4가지 매입형 영구자석(IPM) 형태의 PMSM을 제시한다. Finite Element Analysis(FEM)을 통하여 각 모델의 특성을 해석하고 자석 사용량과 토크를 비교 및 분석하였다.

• 전력전자학회논문지
• /
• 제11권3호
• /
• pp.274-283
• /
• 2006

Permanent Magnet Synchronous Motor(PMSM)는 볼스크류, 기어 및 타이밍 벨트를 이용하여 NC, 가공기, 로봇 및 공장 자동화를 포함하여 산업 시스템 전반에 널리 사용되고 있다. 이러한 PMSM과 부하의 결합으로 구성된 시스템은 동력의 전달에 있어서, 고유의 공진 주파수를 가지며 공진 주파수 대역에서의 기계계의 응답 특성은 매우 불안정하고, 기계 시스템의 손상을 일으키게 된다. 본 논문에서는 PMSM을 이용한 직선 운동 시스템에서 기계적인 결합에 의한 기구부의 진동을 억제하기 위하여 진동 주파수를 자동으로 검출하여, 진동의 원인이 되는 토크 지령 신호를 억제하는 적응형 노치 필터를 포함하는 속도 제어 시스템을 제안한다. 하지만, 기계적인 진동 주파수와 주파수의 대역은 전동기에 결합된 결합 기구 및 부하에 따라서 변동하는 특성을 가지고 기계적인 진동의 크기도 진동원이 되는 신호에 따라 변동하므로, 이를 적응형 노치 필터부에서 이를 진단하여 진동 주파수를 자동으로 억제함으로써 안정적인 운전이 가능하도록 설계된다. 본 논문에서 제안된 기계적인 진동을 억제하기 위한 적응형 노치 필터의 성능은 시뮬레이션 및 실험을 통하여 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.145-147
• /
• 2008

In this paper, the implementation of the Permanent Magnet Synchronous Machine (PMSM) model based on the Matlab/Simulink is described. Due to the analysis of the mathematical dq-modeling, a vector controlled PMSM drive simulation is approached. With the simulated system, unlike in black block models, all machine parameters are accessible for control and verification. Based on the Matlab/Simulink, the model of the PMSM with load torque is established, the simulation is studied and some conclusions are given.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.48-56
• /
• 2007

In this paper, the rotor losses in high-speed permanent synchronous motor (PMSM) considering the operating condition are discussed. In order to maintain the mechanical integrity of a high-speed permanent magnet machine rotor intended for high-speed operation, the rotor assembly is often retained within a stainless steel or Carbon-Fiber/Epoxy sleeve. The sleeve is exposed to fields produced by the stator from either the slotting or the mmf harmonics that are not synchronous with rotor losses. On the basis of analytical field analysis, the rotor losses are analyzed. In particular, the no-load, rated with air-cooled, and forced water cooled conditions are considered. The results are validated extensively by comparison with non-linear finite element method (FEM).

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.199-205
• /
• 2002

This application study presents a solution to control a Permanent Magnet Synchronous Motor without sensors. The use of this system yields enhanced operations, fewer system components, lower system cost , energy efficient control system design and increased efficiency. The control method presented is field oriented control (FOC). The sinusoidal voltage waveforms are generated by the power module using the space vector modulation technique. A practical solution is described and results are given in this application Study. The performance of a Sensorless architecture allows an intelligent approach to reduce the complete system costs of digital motion control applications using cheaper electrical motors without sensors. This paper deals with an overview of sensorless solutions in digital motor control applications whereby the focus will be the new Controller without sensors and its applications.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.1990-1995
• /
• 2010

Main reasons for causing vibration in a permanent magnet synchronous motor (PMSM) are torque ripple and radial force harmonics, and hence, both of them are undesirable in high-precision machine tools and accurate motion-control actuators. Recent research on radial force is the prediction of major vibration frequencies and modes in terms of motor design such as different winding types and a fractional slot number per pole in the stator. Also, proper phase current has been investigated for minimizing radial force harmonics. During the previous studies, all the motors are assumed to be ideally built up in terms of mechanical dimensions, but it is impossible due to dimensional variation within or outside tolerance in production. Therefore, in this paper, the effect of several key factors on radial force is examined and compared regarding manufacturing imperfection.