• Fashion & Textile Research Journal
• /
• v.9 no.3
• /
• pp.341-346
• /
• 2007

This research is the hair damage as treating a perm before and after that is compared the change of surface characteristics of human hair. On the basis of this, we would to show a basic data for hair damage prevention and hair improvement to keep the beautiful and healthy hair. Results are as follows; For the change of formational characteristics of hair surface, untreated hair before the perm treatment had smooth appearance overall and undamaged scale that is in pattern and finely folded was observed but damaged hair and extremely hair had uneven edge and damages throughout along with the dissolution of scale which the border of epidermal gap is unclear. Hair after a perm treatment caused cortical exposures due to extensive loss of scale during the treatment and even bubble effect. Protein perm, regular perm, soft perm, and direct heating perm, in that order, had the most damages to the hair.

• Fashion & Textile Research Journal
• /
• v.4 no.3
• /
• pp.266-272
• /
• 2002

This research is compared and analyzed variations of the heavy metal contents in human hairs according to treating permanent wave manipulation before and after and permanent wave agents. This is the survey of women's hairs in 19 years old. On the basis of this we would like to analyze a extend of exposing of heavy metal scientifically. Also, we would to show a basic data for the permitted limits of heavy metal to keep the healthy hair The conclusion is as follows.; Mean contents of heavy metal in hairs is 2.11 ppm (Pb), 0.25 ppm (Cd), 2.62 ppm (Ni), 256 ppm (Zn), 8.45 ppm (Cu). In reducing agents (processing lotions) of perm, 1.50 ppm (Pb), 0.03 ppm (Cd), 0.05 ppm (Ni), 15.45 ppm (Zn), 0.86 ppm (Cu) in a perm (S), 2.30 ppm (Pb), 0.05 ppm (Cd), 0.05 ppm (Ni), 13.05 ppm (Zn), 0.65 ppm (Cu) in a perm (T). In oxidizing agents (neutralizer) of perm, 1.40 ppm (Pb), 0.03 ppm (Cd), 0.09 ppm (Ni), 9.05 ppm (Zn), 0.65 ppm (Cu) in a perm (S), 1.50 ppm (Pb), 0.02 ppm (Cd), 0.16 ppm (Ni), 8.00 ppm (Zn), 0.85 ppm (Cu) in a perm (T). Mean contents of lead(Pb) didn't show significant differences according to treating cysteine perm agents, showed it according to 3 treating thioglycolic acid perm agents (p<0.05). Mean contents of cadmium(Cd) showed significant differences (p<0.001) according to 2 treating both perm agents. Mean contents of nickel (Ni) showed neither. Mean contents of zinc (Zn) showed significant differences according to 2 treating cysteine perm agents (p<0.001) and 1 treating thioglycolic acid perm agents (p<0.01). Mean contents of copper (Cu) didn't show significant differences according to treating cysteine perm agents, showed it according to 1 treating thioglycolic acid perm agents (p<0.001).

• Applied Microscopy
• /
• v.42 no.3
• /
• pp.129-135
• /
• 2012

In this study, the changes in hair quality before and after Magic straight perm have been evaluated through a hair damage measurement method. For this, a healthy high school student's (age18 years) wavy hair was selected and permed on the left and right sides. Then, the changes caused by physical methods which were applied during the fl at iron-based Magic straight perm were evaluated based on the hair damage measurement method before and after the Magic straight perm. According to the protein release test after the Magic straight perm, 1.26% in average and 0.14% was observed in Cool Magic straight perm sample. In a field emission scanning electron microscopy (FE-SEM) test, saw teeth-shaped partial desquamation of cuticle cells and impurities were observed in the warm-treated hair sample. In atomic force microscope (AFM), line-profile is a method to represent roughness data on hair. According to analysis on 3-dimensional (3D) images, the hair with Cool Magic straight perm was lower than the hair with Warm Magic perm in terms of the color change of 3D images. In addition, vertical changes were observed in the hair with Cool Magic perm. As a result, irregular surface roughness was observed. This study proposed a method to minimize hair damage by cooling down the heat with the cool hair straightener as soon as the Warm Magic was finished.

• Korean Journal of Human Ecology
• /
• v.17 no.3
• /
• pp.553-562
• /
• 2008

These days hair perm and dye is a modern trend that women prefer to create their own image and personality. However, chemicals for hair perm and dye are easy to damage hair. This study, then, is to find out some effective skills to minimize hair damage when hair perm and dye is done in a same time. The subjects were 200 hairs picked from five healthy women in their twenties which have not been permed and dyed since one year and more ago. The experimental group was divided into two groups: 1)the perm- nutritional treatment- dye (PNT) group 2)the dye- perm- nutritional treatment(DPN) group. After experiments, the states of "hair scale", "hair damage", and "color tone in dyed hair" were compared between two groups. The results are as follows: to lessen hair damage when hair perm and dye is done in a same time, nutritional treatments must be necessarily used on hair. To make hair colored more clearly when hair dye is done, it is more desirable to use nutritional treatments on hair.

• The Journal of the Korea Contents Association
• /
• v.20 no.6
• /
• pp.312-325
• /
• 2020

The heat perm is the preferred hair technique to get positive affects such as increase of work efficiency and sale in hair industry. The subjects of this study is 262 hair shop workers and it was investigated heat perm device using reason, using satisfaction and repurchase. As a result, the perm accounted for 32.1 and the use of digital perm devices was more than that of setting perm devices. The reasons for the use were that the longer the setting device was engaged, the flexible it was the hair wave. The higher the rank, the better the hair wave retention and the long hair treatment, and it also helped sales. (p<0.05) Digital perm device can be hair-wavy in the desired style while in use, and the longer the working period, the more advantageous. The repurchase intention was that the longer the period of service and the higher the rank, the more advantageous it was. (p<0.05) The reasons for the usage of setting perm and digital perm were correlated with the satisfaction of use and the repurchase intention. The reasons for the use were helpful for sales and elastic hair wave and long hair waving was possible, which affected the repurchase. In conclusion, heat perm had been found not only helped sales, made a good hair wave, and the long hair waving, but also to be preferred to the long working period of the hair shop and the rank above the designer.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.3 s.9
• /
• pp.13-17
• /
• 2006

Perm is one the of the most common thing in a beauty salon like hair-cut and hair perm needs processing solutions which is chemical substances. Those chemical substances damage the hair cuticle. Damaged hair cuticles with mistakes of perm will follow with the next performance and it will cause more damage to hair. As damage of hair cuticle become worse, it is harder to recover the hair cuticle like before. Therefore, this study shows that plain rinse is the way to reduce the damage of hair cuticle with perm as much as possible. With experiments, I suggest the right way to do plain rinse to satisfy customers' demand and reduce the damage. During the research, I figured that plain rinse with the knowledge, structure of hair cuticle, principle of perm and plain rinse, is very needed. The hair with plain rinse have more elastic curl and have less scales which came off from hair cuticle than the hair without plain rinse. This experiment concludes that hairdresser has to figure out about the time, temperature and type of water depends on the degree of damaged hair of customers. In order to perm, there is no way to not to use chemical substances to perm. Therefore, hairdresser has to choose suitable processing solutions and right steps, and as this is the age of 'well-being' boom, hairdresser must try to keep the healthy hair. Consequently, in order to meet the demands and conditions of customers, hairdresser needs to find the right method to do plain rinse and use the method in perm.

• Textile Coloration and Finishing
• /
• v.26 no.1
• /
• pp.63-70
• /
• 2014

This study has attempted to figure out the effects of the surface heat of perm rods on hair. For this, after forming perm waves, hair damage and its causes have been investigated with a different hair bleach method. If hair was bleached immediately without shampooing after a perm using the heat of rods, great perm waves were formed. However, severe damage was found on the hair because of the heated rods. In addition, when hair was shampooed and dried after the perm, hair bleach was more effective. It has been confirmed that hair was damaged because of high temperature of the surface of the rods. In fact, the heated rods had a direct effect on hair damage. According to these results, it has been confirmed that heat-based perms can accelerate hair damage. Therefore, it is necessary to perform a study on the minimization of the heating of permanent tools.

• Microbiology and Biotechnology Letters
• /
• v.47 no.3
• /
• pp.372-380
• /
• 2019

Modern biotechnological industries have been attempting to improve the efficiency of bacterial strain cultivation. Millimeter wave electromagnetic radiation can have a varied influence on E. coli cultivation processes. The results of the study revealed that when a microwave radiation of low intensity is applied to positively adjust the conditions for the accumulation of bacterial culture biomass, a significant role is played not only by radiation parameters, but also by concomitant biological factors, which influence the reproducibility of the cultivation process and help obtain a useful biotechnological effect. The authors suggest a model that can be used to study the molecular mechanisms underlying the changes in the buildup of E. coli biomass under the influence of electromagnetic radiation.

• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.611-620
• /
• 2010

This paper presents a new architecture, called "Power Electronics Remote Wiring and Measurement Laboratory (PermLAB)", that translates a common gateway interface (CGI) string from a remote web user to a web server connected to a 3-dimension switching matrix board, can be used to switch on and off, and to control a cluster of instruments and components. PermLAB addresses real-time connection, switching, and data acquisition over the Internet instead of using simulated data. A software procedure uses a signature system to identify each instrument and component in a complex system. The Web-server application is developed in HTML, JavaScript and Java, and in C language for the CGI interface, which resides in a controller portion of LabVIEW. The LabVIEW software fully integrates the Web sever, LabVIEW data acquisition boards and controllers, and the 3-dimensional switching matrix board. The paper will analyze a half-wave rectifier (AC - DC converter) circuit connected over the Internet using the PermLAB. PermLAB allows students to obtain real data by real-time wiring of real circuits in the laboratory using a "virtual breadboard" on the Web. The software for the Web-based 3-dimensional system is flexible, portable, can be integrated into many laboratory applications or expanded, and easily accessible worldwide.

• Journal of applied mathematics & informatics
• /
• v.7 no.2
• /
• pp.507-516
• /
• 2000

In the present paper we consider a problem of choosing the rational way to carry on the metal processing (the problem of stochastic optimization) and the problem of determing the unknown characteristics of parameters described with random variables.