• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.2
• /
• pp.175-185
• /
• 2005

The scheduling methods of the distributed real-time systems have been proposed. However, they have some weak points. They did not schedule both sporadic and periodic tasks and messages at the same time or did not consider the end-to-end constraints such as precedence relations between sporadic tasks. This means that system scheduling must guarantee the constraints of practical systems and be applicable to them. This paper proposes a new scheduling method that can be applied to more practical model of distributed real-time systems. System model consists of sporadic and periodic tasks with precedence relations and sporadic and periodic messages and has end-to-end constraints. The proposed method is based on a binary search-based period assignment algorithm, an end-to-end laxity-based priority assignment algorithm, and three kinds of schedulability analysis, node, network, and end-to-end schedulability analysis. In addition, this paper describes the application model of sporadic tasks with precedence constraints in a distributed real-time system, shows that existing scheduling methods such as Rate Monotonic scheduling are not proper to be applied to the system having sporadic tasks with precedence constraints, and proposes an end-to-end laxity-based priority assignment algorithm.

• The KIPS Transactions:PartC
• /
• v.14C no.4
• /
• pp.371-382
• /
• 2007

In this paper, we propose a real-time sensor node platform that efficiently manages periodic and aperiodic tasks. Since existing sensor node platforms available in literature focus on minimizing the usage of memory and power consumptions, they are not capable of supporting the management of tasks that need their real-time execution and fast average response time. We first analyze how to structure periodic or aperiodic task decomposition in the TinyOS-based sensor node platform as regard to guaranteeing the deadlines of ail the periodic tasks and aiming to providing aperiodic tasks with average good response time. Then we present the application and efficiency of the proposed real-time sensor node platform in the sensor node equipped with a low-power 8-bit microcontroller, an IEEE802.15.4 compliant 2.4GHz RF transceiver, and several sensors. Extensive experiments show that our sensor node platform yields efficient performance in terms of three significant, objective goals: deadline miss ratio of periodic tasks, average response time of aperiodic tasks, and processor utilization of periodic and aperiodic tasks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2801-2809
• /
• 1996

Scheduling problems in real-time systems are known to be NP-hard. the heuristic approaches aregenerally aplied to solve a certain class of systems. One of such cases is to allocate periodic tasks to multiprocessors while the moethod assures the requirement of the deadine constraints of real-time systems. The study on the allocation of periodic taks includes RMNF, RMFF, FFDUF and Next-Fit-M algorithms, which make a set of task grups first and then allocate to processors. This papre proposes the various algorithms which are based on the Next-Fit-M. To analyze the four proposed methods, simulation was carried on, in which the sample tasks are randomly generated with the various time intervals. The proposed algorithms reduce the number of processors compared with the conventional methods.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.376-380
• /
• 2008

This paper deals with a performance analysis of real-time control systems, which engages DMR(dual modular redundancy) to detect transient errors and checkpointing technique to tolerate transient errors. Transient errors are caused by transient faults and the most significant type of errors in reliable computer systems. Transient faults are assumed to occur according to a Poisson process and to be detected by a dual modular redundant structure. In addition, an equidistant checkpointing strategy is considered. The probability of the successful task completion in a real-time control system where periodic checkpointing operations are performed during the execution of a real-time control task is derived. Numerical examples show how checkpoiniting scheme influences the probability of task completion. In addition, the result of the analysis is compared with the simulation result.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.3
• /
• pp.6-15
• /
• 1992

This paper proposes a method for the global optimization of redundancy over the whole task period for a kinematically redundant robot. The necessary conditions based on the calculus of variations for an integral type cost criterion result in a second-order differential equation. For a cyclic task, the periodic boundary conditions due to conservativity requirements are discussed. We refine the two-point boundary value problem to an initial value adjustment problem and suggest a numerical search method for providing the conservative global optimal solution using the gradient projection method. Since the initial joint velocity is parameterized with the number of the redundancy, we only search the parameter value in the space of as many dimensions as the number of degrees of redundancy. We show through numerical examples that multiple nonhomotopic extremal solutions and the generality of the proposed method by considering the dynamics of a robot.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.5
• /
• pp.1203-1211
• /
• 1999

Checkpointing is the one of fault-tolerant techniques to restore faults and to restart job fast. Checkpointing algorithms in distributed systems have been studied for many years. These algorithms can be classified into synchronous Checkpointing algorithms and asynchronous Checkpoiting algorithms. In this paper, we propose an independent Checkpointing algorithm that has a minimum Checkpointing counts equal to periodic Checkpointing algorithm, and relatively short rollback distance at faulty situation. Checkpointing count is directly related to task completion time in a fault-free situation and short rollback distance is directly related to task completion time in a faulty situation. The proposed algorithm is compared with the previously proposed asynchronous Checkpointing algorithms using simulation. In the simulation, the proposed Checkpointing algorithm produces better results than other algorithms in terms of task completion time in fault-free as well as faulty situations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.148-154
• /
• 2012

For a successful checkpointing strategy, we should place checkpoints so as to optimize fault-tolerance capability of real-time systems. This paper presents a novel scheme of checkpoint placement for real-time systems with periodic multi-tasks. Under the influence of transient faults, multi-tasks are scheduled by the Rate Monotonic (RM) algorithm. The optimal checkpoint intervals are derived to maximize the probability of task completion. In particular, this paper is concerned about the general case that the deadline of a task is longer than the period. Compared with the special condition that the deadline is equal to or less than the period, this general case causes a more complicate test procedure for schedulability of the RM algorithm with respect to a given set of checkpoint re-execution vectors. The probability of task completion is also derived in a more complex form. A case study is given to show the applicability of the proposed scheme.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2891-2902
• /
• 1997

This paper presents an analysis on the optimal partitioning configuration of cache (memory) for meeting deadlines of periodic and aperiodic real-time task set. Our goal is not only to decrease the deadline missing ratio of each task by minimizing the task utilization, but also to allocate another tasks to idle spaces of cache. For this reason, we suggest an algorithm so that tasks could be allocated to cache segments. Here, the set of cache segments allocated tasks is called a cache partitioning configuration. Based on how tasks allocate to cache segments, we can get various cache partitioning configurations. From these configurations, we obtain the boundary of task utilization that tasks are possible to schedule, and analyze the cache optimal partitioning configuration that can be executed to minimize the task utilization.

• Nuclear Engineering and Technology
• /
• v.50 no.7
• /
• pp.1051-1059
• /
• 2018

Fast periodic pulsed reactor is a type of reactor in which the fission bursts are formed entirely with external reactivity modulation with a specified time periodicity. This type of reactors could generate much larger intensity of neutron beams for experimental use, compared with the steady state reactors. In the design of fast periodic pulsed reactors, the time dependent simulation of the power pulse is majorly based on a point kinetic model, which is known to have limitations. A more accurate calculation method is desired for the design analyses of fast periodic pulsed reactors. Monte Carlo computer code MCNP6 is used for this task due to its three dimensional transport capability with a continuous energy library. Some new routines were added to simulate the rotation of the movable reflector parts in the time dependent calculation. Fast periodic pulsed reactor IBR-2M was utilized to validate the new routines. This reactor is periodically in prompt supercritical state, which lasts for ${\sim}400{\mu}s$, during the equilibrium state. This generates long neutron fission chains, which requires tremendously large amount of computation time during Monte Carlo simulations. Russian Roulette was applied for these very long neutron chains in MCNP6 calculation, combined with other approaches to improve the efficiency of the simulations. In the power pulse of the IBR-2M at equilibrium state, there is some discrepancy between the experimental measurements and the calculated results using the point kinetics model. MCNP6 results matches better the experimental measurements, which shows the merit of using MCNP6 calculation relative to the point kinetics model.

• Journal of Information Technology Services
• /
• v.16 no.3
• /
• pp.103-111
• /
• 2017

The real time scheduling is a key research area in high performance computing and has been a source of challenging problems. A periodic task is an infinite sequence of task instance where each job of a task comes in a regular period. The RMS (Rate Monotonic Scheduling) algorithm has the advantage of a strong theoretical foundation and holds out the promise of reducing the need for exhaustive testing of the scheduling. Many real-time systems built in the past based their scheduling on the Cyclic Executive Model because it produces predictable schedules which facilitate exhaustive testing. In this work we propose hybrid scheduling method which combines features of both of these scheduling algorithms. The original rate monotonic scheduling algorithm didn't consider the uniform sampling tasks in the real time systems. We have enumerated some issues when the RMS is applied to our hybrid scheduling method. We found the scheduling bound for the hard real-time systems which include the uniform sampling tasks. The suggested hybrid scheduling algorithm turns out to have some advantages from the point of view of the real time system designer, and is particularly useful in the context of large critical systems. Our algorithm can be useful for real time system designer who must guarantee the hard real time tasks.