• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.63-75
• /
• 2010

In this paper, the equalizer techniques that is able to adopt the digital on-channel repeater for 8VSB-based DTV system has been analyzed and we propose an effective equalizer structure which can reduce the error propagation phenomenon by the feedback signal and improve the receiver performance at the same time. In order to confirm the effective cancellation of the feedback signal, the multi-level Correlation LMS scheme is proposed through the analysis of conventional basic LMS based DFE and Correlation LMS algorithm and as compared with the conventional method, we can confirm the reduction of error propagation. When performing the computer simulation, as the Brazil channel model which is very popular for DTV broadcasting system is adopted, the result is drawn by comparing and analysing the equalizer algorithm. We have examine the symbol error rate which is in the range of 15~25dB of operation receipt SNR and MSE(Mean Square Error) in the DTV broadcasting system. As a result of comparing with the existing method, the signal-noise ratio which is necessary for maintain the bit error correction ability that the means of proposal is same is reduced by about 2~5dB, and in the rate of convergence through the MSE, we found the reduction of needed time.

• Journal of Biomedical Engineering Research
• /
• v.29 no.1
• /
• pp.66-72
• /
• 2008

The major risk associated with the use of automated power injectors is the well known complication of contrast material extravasation at the injection site. Automated injection of computed tomography (CT) contrast media can produce the compartment syndrome. The purpose of this study was to assess the ability of this device during clinically important episodes of extravasation. The extravasation detection accessory (EDA) system was composed of a strain gage, an amplifier and a computer based system. A strain gage pliable adhesive patch was applied to the skin aver the intravenous catheter and the catheter was connected to the power injector with a cable to monitor the resolution data. If the programmed monitoring, which was developed with MS Visual C++, at the extravasation occurred, then the injection was interrupted the auto injector. CT was used to demonstrate the clinically important extravasation. This study was a prospective, observational study in which the EDA system was used to monitor the automated mechanical injection of contrast material in 7 dogs. There were two true-positive cases (range of extravasation volumes: $18{\sim}22ml$), twenty three true-negative cases, three false-positive cases and no false-negative cases. The EDA system had a sensitivity of 100% and a specificity of 88% for the detection of clinically important extravasation. The EDA system had good sensitivity for the detection of clinically important extravasation and the EDA system has the clinical potential for the early detection of extravasation of the contrast medium that is administered with power injectors. The EDA system is easy to use safe and accurate for the monitoring extravasation of the intravenous injections, and this system may prove especially useful in CT applications.

• Cartoon and Animation Studies
• /
• s.25
• /
• pp.41-63
• /
• 2011

Many educational facilities have been formed due to the nation's revival policy in the animation industry since about 1995. Owed to the active financial support of the nation, the production industry rapidly vitalized, production technology rapidly advanced, and a large workforce is being passed on into society through educational institutions. The reality of many developing countries appearing to be putting emphasis on the industrialization of animation, similar to our country, is becoming a great pressure on us industrially. It is never easy to develop a certain field into a globally competitive industry in a short period of time. Our countermeasure, pursuant to these international circumstances, lies in innovation and creativity that has broken away from the existing methods of production, and mass production of high quality animation specialists. This paper is a new educational proposition for the consolidation of national competitiveness. Animating, the core of producing an animation, completely depends on the animator's artistic and technical ability. In order to supplement the existing methods of studying by theory and make up for the biggest weak point, which is the lack of "on the scene" learning contents, I propose incorporating movements based on frequently appearing characters in popular animations and acting them out slowly and including the "Slow Motion" kinetic effect, a way of enabling someone to learn and sense astrodynamic fundamental principles by oneself. It is a new method of learning movement, a plan made to achieve sensual performance gestures, and an improvement in direction for students who wish to become animators in the future.

• 대한공업교육학회지
• /
• v.45 no.1
• /
• pp.1-19
• /
• 2020

The purpose of this research was to draw implications for preparing utilizing and management course assessment type of national technical qualification based on the awareness of teachers in industrial secondary vocational high schools. To achieve it, this researcher analyzed the awareness about management course assessment type of national technical qualification of teachers at industrial secondary vocational high schools and analyze possibility to introduce course assessment qualification, degree of agreement for expected effects, and importance and necessity for the matters to be considered when introducing management course assessment qualification. Concrete results of this research are as follows. First, the degree of understanding management course assessment type of national technical qualification at industrial secondary vocational high schools was common, but the degree of agreement for introducing goal, purpose, and necessities was low. Second, for the expected effects to be obtained when acquiring course assessment qualifications, there were acquisition of qualification at the same time of education, suggestion of studying goal from an angle of concrete and significant performance, systematic education based on NCS, possibility to develop and form training career, and possibility to acquire industrial field-centered knowledge and technology in order. Third, to draw priority of each item to be considered when introducing course assessment type of national technical qualification at industrial secondary vocational high schools, the importance and necessities were analyzed. As a result, for the sectors whose requirements are more than average, there were flexibility of course assessment type qualification classes, preparation of proper measure by NCS revision, relief of edited classes of necessity ability unit, etc.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.535-539
• /
• 2010

This paper include to study DoA(Direction of Arrival) for radio collection and monitoring system. The direction finding calculated by applying the CVDF (Correlation Vector Direction Finding) algorithm for the five circular dipole antenna over V / UHF band. To improve the accuracy of direction finding by applying CVDF algorithm needs to obtain ideal phase difference each antennas. However, a circular array antenna phase difference pattern may be distorted on a specific frequency band or to particular direction. The effect of installing each array antennas circularly and the effect of the interference of center pole (located in the center of a circular array antenna mount) may make the distortion of phase pattern. If you use an active antenna instead of passive antenna to obtain good sensitivity, you would measure the more distortion. This paper propose how to change combination of antennas to measure the phase in real-time and how to use antenna beam patterns for minimizing the degradation phenomena at applying simple CVDF algorithm and increasing the direction finding capability.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.11
• /
• pp.593-606
• /
• 2016

Computer simulation is widely used in a variety of computational science and engineering fields, including computational fluid dynamics, nano physics, computational chemistry, structural dynamics, and computer-aided optimal design, to simulate the behavior of a system. As the demand for the accuracy and complexity of the simulation grows, however, the cost of executing the simulation is rapidly increasing. It, therefore, is very important to lower the total execution time of the simulation especially when that simulation makes a huge number of repetitions with varying values of input parameters. In this paper we develop a simulation service system that provides the ability to predict the result of the requested simulation without actual execution for that simulation: by recording and then returning previously obtained or predicted results of that simulation. To achieve the goal of avoiding repetitive simulation, the system provides two main functionalities: (1) storing simulation-result records into database and (2) predicting from the database the result of a requested simulation using statistical machine learning techniques. In our experiments we evaluate the prediction performance of the system using real airfoil simulation result data. Our system on average showed a very low error rate at a minimum of 0.9% for a certain output variable. Using the system any user can receive the predicted outcome of her simulation promptly without actually running it, which would otherwise impose a heavy burden on computing and storage resources.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.8
• /
• pp.317-326
• /
• 2013

In this paper, we present an effective method for comparing control flow graphs which represent static structures of binary programs. To compare control flow graphs, we measure similarities by comparing instructions and syntactic information contained in basic blocks. In addition, we also consider similarities of edges, which represent control flows between basic blocks, by edge extension. Based on the comparison results of basic blocks and edges, we match most similar basic blocks in two control flow graphs, and then calculate the similarity between control flow graphs. We evaluate the proposed edge extension method in real world Java programs with respect to structural similarities of their control flow graphs. To compare the performance of the proposed method, we also performed experiments with a previous structural comparison for control flow graphs. From the experimental results, the proposed method is evaluated to have enough distinction ability between control flow graphs which have different structural characteristics. Although the method takes more time than previous method, it is evaluated to be more resilient than previous method in comparing control flow graphs which have similar structural characteristics. Control flow graph can be effectively used in program analysis and understanding, and the proposed method is expected to be applied to various areas, such as code optimization, detection of similar code, and detection of code plagiarism.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.27-36
• /
• 2012

In Korea, 28,641 cases of traffic accidents were caused by drunk driving in 2010. These statistics accounted for 12.62% of total number of traffic accidents. Moreover, the percentages of deaths and injuries from them were nearly 15% of those from whole traffic accidents. While police has emphasized enforcement efforts in order to reduce drunk driving, culture generous to drunk driving in addition to the absence of an appropriate intervention system for habitual drunk drivers have contributed to the increasing number of the drunk driving accidents in Korea. This study examined specific behavioral changes in drunk driving by comparing drivers' behavior pattern in non-alcoholic condition to those in alcoholic condition, using a psychomotor test and a driving simulator. In the psychomotor test measuring participants' reactions to the target stimulus, it was revealed that participants' correct responses were decreased, false responses were increased, and no responses also were increased after drinking. Furthermore, in the driving simulator performance after drinking, not only driving speed was faster but also the deviation of an accelerator pedal pressure and of the vehicle's lateral position were much increased. These results indicated that alcohol consumption would impair visio-cognitive ability and deteriorate driving safety. Finally, the implications and limitations of our findings and suggestions for the future research were discussed.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.85-95
• /
• 2009

Congestion on expressways is increasing in spite of continuous road construction. In enlargement of expressway capacity to lessen congestion, a long period is needed and in the case of traffic congestion, it would be impossible to avoid long periods of traffic congestion. So, it is necessary to cope with traffic congestion through continuous traffic condition monitoring, analysis of the causes of congestion and the development of alternatives before traffic conditions worsen. A congestion index that can express traffic operating conditions measurably is needed to monitor those conditions. Thus, in this research, a new congestion index, the Traffic Condition Index (TCI), is developed. TCI is able to evaluate roads that have different grades (or design speeds) and to judge traffic condition as good, fair and poor (congested). In addition, TCI has merits in that it can strengthen the function of existing Freeway Traffic Management Systems (FTMS) and can be applied to congestion management easily: TCI calculates congestion intensity and severity using data obtained from existing FTMS. In order to validate TCI, it was applied to the Kyungbu Expressway and the Seohaean Expressway. As a result, TCI shows a good performance in the aspect of applicability and ability of presentation of traffic conditions compared with travel speed and Travel Time Index (TTI).

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.4
• /
• pp.271-280
• /
• 2018

Background: Astragalus membranaceus is a well known oriental medicinal herb. The polysaccharides of the aboveground parts (AMA) and the radix (AMR) of A. membranaceus are the most important functional constituents. Methods and Results: The aim of this study was to determine the effects of AMA and AMR on the oxidative damage induced in the skeletal muscle of rats subjected to exhaustive exercise. Sprague-Dawley rats were randomly divided into exercise and non-exercise groups; in the groups receiving the test compounds, AMA and AMR were administered orally for 30 days. Skeletal muscle samples were collected from each rat after running to exhaustion on a treadmill to determine the activities of superoxide dismutase (SOD), glutathione peroxidase (GSH-Px), and catalase (CAT) and the concentation of malondialdehyde (MDA). The antioxidant enzyme activities of SOD and GSH-Px of skeletal muscle of AMA- and AMR-treated groups were significantly higher than those of the control and commercial sports drink (SPD)-treated groups in exhaustive exercise rats. In addition, MDA concentrations in the skeletal muscle of the AMA- and AMR-treated groups were significantly lower than those of the control and SPD-treated groups. In the present study, the effects of AMA and AMR on exercise endurance capacity were also evaluated in mice subjected to a swimming exercise test. AMA and AMR supplementation prolonged the swimming time of mice and enhanced exercise endurance capacity. AMA and AMR possess the ability to retard and lower the production of blood lactate, and prevent the decrease of serum blood glucose. Conclusions: These results showed that, AMR and AMA exerted beneficial effect in mice, increasing the activity of the antioxidant systems and inhibiting oxidative stress induced by exhaustive exercise. The compounds improved exercise performance and showed anti-fatigue effects against exhaustive exercise.