• Journal of The Korean Association of Information Education
• /
• v.13 no.2
• /
• pp.135-144
• /
• 2009

The purpose of this study was to explore strategies for promoting distance education program and for providing total information for teachers about curriculum of distance educational training institute. In 2007, there were 65 institutes of distance education training, but we don't have enough information about curriculum of the institutes. To analyze curriculums of the institutes, it had been selected 33 institutes of 65, and 567 of performance training programs, 317 of optional programs, and 23 of free training programs. The following results were obtained : (1) It calls for easy accessibility to distance educational training institutes (2) It has to overcome biased status that private institutes have more courses than government institutes'. (3) It will be needed to make diverse courses for teacher's capabilities. (4) It calls for course development of several subject matters (5) It will be needed to maintenance for running course continuously. (6) It has to make supporting plan for excellent courses by government.

• Journal of Digital Contents Society
• /
• v.9 no.3
• /
• pp.483-490
• /
• 2008

In this paper, we propose an active location acquisition terminal needing to construct an infrastructure based on a LBS and analyze the performance in real field. The proposed terminal is compounded with a GPS module and a CDMA module, so it can get the location information independently using satellite GPS signal and the proposed terminal can decide a user location with the location information of a base station in satellite GPS shadowed area. This is the distinguishable location acquisition method from the conventional A-GPS, and it complements a disadvantage of the conventional GPS. From these results, we can confirm that the proposed active location acquisition terminal is suitable to the requirements for the LBS which are the independent location acquisition ability, the continuity in the location information acquisition and the maintenance in the location information security.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.394-399
• /
• 2009

Since some decades ago, there has been a concern for resource depletion and environmental pollution associated with building properties. In addressing such impact of the built environment, there is a recognition of the existence of alternative building materials, fuels for energy supply as well as technologies for waste handling and disposal. Nevertheless, for long time, the choice between such alternatives was dictated by factors such as differences in prices and aesthetic values. A new important dimension in discriminating between different options is the environmental dimension. This aspect is important since buildings are one of the spatially big new additions to the natural environment that consume a lot of materials and energy during their long lifetime. Thus, with the environmental dimension kept in mind, a existing cost estimation needs to be changed. A new cost assessment method, Life Cycle Cost, should calculate overall costs with dimensional factors: investment and utility costs as well as maintenance costs over the lifetime of the building. Aiming to give an overview of the present status of Building Life Cycle Assessment(LCA) tools as a basis for further research and development including economic performance, this paper describes and compares 3 different tools for Life Cycle Assessment(LCA) and economic analysis of the green buildings. This paper compared these approaches based on various aspects. These include economic analysis method, evaluation duration, data of results(index). Use of the comparison analysis is to produce a better picture and indicate profits and shortcomings for the tools as a group; thus providing important direction improvement of LCA tool as well as further research and development of this group of tools.

• Journal of Wetlands Research
• /
• v.11 no.2
• /
• pp.55-66
• /
• 2009

The increase of pollutant loadings from nonpoint sources affect the water quality of the major rivers in Korea. Consequently, the need for managing the nonpoint source (NPS) pollution becomes the main concern of the Korean Ministry of Environment (MOE). Recently, the policy was changed from pollutant concentration-restricting approach to the total maximum daily load (TMDL) approach to improve the water quality and protect the aquatic ecosystem. Part of the program is the construction of Best Management Practice (BMP) pilot facilities basically to control NPS. Most of the BMPs adopted were foreign technologies which could not be properly employed in the country due to some limitations such as climate, watershed characteristics, etc. In other words, to be able to apply the BMPs, research on its applicability is necessary. In this study, a three-year monitoring has been conducted to assess the treatment performance of the BMP installed in highway toll plaza and parking lot. The data gathered aid in the characterization of NPS pollutants in runoff and estimation of the pollutant removal efficiency of the BMP. The results will be used for the future implementation of BMP in different land uses as well as for the determination of optimum operation and maintenance.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.159-169
• /
• 2016

The current railway control system in Korea is comprised of signaling, electric rail power, communication, and maintenance systems that are independent of each other. Further, these systems have different mediums and protocols for transmitting the field equipment data to the central control system. The Safety Supervision System has as its purpose the collecting of safety-related data from each system to predict and prevent accidents, this system utilizes standard protocol. Safety-related data need to be collected from field data transmission devices of the existing control system, the data should be collected without affecting the communication of the existing system. In this study, sniffing skill, which is typically used for network traffic monitoring or security, is used to collect data. The problems arising from the use of sniffing devices are noted, and the Packet Conversion Node is proposed as a solution to the problems. Further, functional and performance testing were completed for the prototype, and the software architecture and packet conversion process were verified.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.6
• /
• pp.556-566
• /
• 2019

Recently, as the supply of residential polymer electrolyte membrane fuel cells (PEMFCs) increases, the durability and lifetime of the PEMFC system are becoming important. The related studies have been mainly focused on the durability and lifetime of materials while the research on the durability and maintenance of the system level is insufficient. In this paper, a model-based fault detection method is developed considering an air supply system that is dominant to the system performance and efficiency. A commercial 1 kW residential fuel cell system is built, and experiments are conducted under various operation loads and states (normal, 6 faults). From the experimental data, nominal models and residuals are generated. With the residual pattern obtained from real-time data, the detection and classification of various faults can be possible. The technical importance of this paper is to minimize extra sensor installation by using the empirical model rather than a complex mathematical model, and to decrease the number of models by using the applicable model at three loads. Finally, the model-based fault detection method for the air supply system of a PEMFC is established and is expected to be applicable to other subsystems.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.6
• /
• pp.67-77
• /
• 2009

Infrastructure asset management can be defined as the long term and cost effective management strategy to meet the required service level. In most developed countries, the major motivations of the introduction of asset management are increment in number of assets, extension of maintenance field, accounting approaches of public facilities, performance-based FM(Facility Management), limitations of public funds and public-private partnership, life cycle cost approach, and the development of information technology. This paper discusses the strategic and stepwise methods of introducing infrastructure asset management. Strategic approaches are suggested to develop the practical methods of condition and value assessment of assets, and long-term capital investment plan for optimized decision making(ODM). Required systematic processes are analyzed in terms of resource and technical limitations and detailed implementation plan for each development phases are suggested.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7C
• /
• pp.677-684
• /
• 2002

Today's Internet does not have efficient traffic engineering mechanism to support QoS for the explosive increasing internet traffic such as various multimedia traffic. This functional shortage degrades prominently the quality of service, and makes it difficult to provide multi-media service and real-time service. Various technologies are under developed to solve these problems. IETF (Internet Engineering Task Force) developed the MPLS (Multi-Protocol Label Switching) technology that provides a good capabilities of traffic engineering and is independent layer 2 protocol, so MPLS is expected to be used in the Internet backbone network$\^$[1][2]/. The faults occurring in high-speed network such as MPLS, may cause massive data loss and degrade quality of service. So fast network restoration function is essential requirement. Because MPLS is independent to layer 2 protocol, the fault detection and reporting mechanism for restoration should also be independent to layer 2 protocol. In this paper, we present the experimental results of the MPLS OAM function for the performance monitoring and fault detection 'll'&'ll' notification, localization in MPLS network, based on the OPNET network simulator

• Computers and Concrete
• /
• v.20 no.4
• /
• pp.391-407
• /
• 2017

Fiber reinforced polymer (FRP) bars have been recently used to reinforce concrete members in flexure due to their high tensile strength and especially in corrosive environments to improve the durability of concrete structures. However, FRPs have a low modulus of elasticity and a linear elastic behavior up to rupture, thus reinforced concrete (RC) components with such materials would exhibit a less ductility in comparison with steel reinforcement at the similar members. There were several studies showed the behavior of concrete beams with the hybrid combination of steel and FRP longitudinal reinforcement by adopting the experimental and numerical programs. The current study presents a numerical and analytical investigation based on the data of previous researches. Three-dimensional (3D) finite element (FE) models of beams by using ANSYS are built and investigated. In addition, this study also discusses on the design methods for hybrid FRP-steel beams in terms of ultimate moment capacity, load-deflection response, crack width, and ductility. The effects of the reinforcement ratio, concrete compressive strength, arrangement of reinforcement, and the length of FRP bars on the mechanical performance of hybrid beams are considered as a parametric study by means of FE method. The results obtained from this study are compared and verified with the experimental and numerical data of the literature. This study provides insight into the mechanical performances of hybrid FRP-steel RC beams, builds the reliable FE models which can be used to predict the structural behavior of hybrid RC beams, offers a rational design method together with an useful database to evaluate the ductility for concrete beams with the combination of FRP and steel reinforcement, and motivates the further development in the future research by applying parametric study.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.69-75
• /
• 2008

This paper presents an algorithm robust to error for estimating partial discharge (PD) location using acoustic emission sensors. In operating transformers, the velocity computing of the acoustic signal is difficult because the temperature of the Insulation oil is not homogeneous. So, some error occurs in the process. Therefore, the algorithm estimating PD location must consider this error to provide maintenance person with useful information. The conventional algorithm shows the PD position as a point, while the new algorithm using LookUp-Table(LUT) shows PD position as error-map visually. The error-map is more useful than the conventional result because of robustness to error. Also, we compared performance of them, by adding error to data on purpose.