• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.2
• /
• pp.102-108
• /
• 2011

The existing vessels lighting control system has several problems, which are complexity of construction and high cost of establishment and maintenance. In this paper, We designed low cost and high performance lighting control system at digital vessel environment. We proposed a system which recognize the user's emotions after obtaining the biological informations about user's bio information(pulse sensor, blood pressure sensor, blood sugar sensor etc) through wireless sensors controls the LED Lights. This system classified emotions using backpropagation algorithm. We chose 3,000 data sets to train the backpropagation algorithm. As a result, obtained about 88.7% accuracy. And the classified emotions find the most appropriate point in the method of controlling the waves or frequencies to the red, green, blue LED Lamp comparing with the 20-color-emotion models in the HP's 'The meaning of color' and control the brightness or contrast of the LED Lamp. In this method, the system saved about 20% of the electricity consumed.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.229-236
• /
• 2018

A customized cleaning agent was investigated for improving the performance decreased by the pollution of collecting plates in an electric fume collector (EFC) which was developed and applied for the purification of effluent gas including oil mist from the textile industry. The pollutants on the surface of collecting plates were blackened by the condensation of oil mist for a long time and difficult to remove by general cleaning agents. The composition of an optimized cleaning agent consisted of alkali, alcohol, glycol and non-ionic surfactant sources was determined by considering the pollutant properties and effect on the damage of the basic metal of collecting plate and so on. The developed cleaning agent solution diluted by 9.1% was applied to the field test, and also the pollutants strongly adhered on collecting plate surfaces were successfully removed by a simple spraying method. The effluent gas purification efficiency of EFC increased significantly by cleaning of collecting plates.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.156-160
• /
• 2007

Ejector system is a device to transport a low-pressure secondary flow by using a high-pressure primary flow. Ejector system is, in general, composed of a primary nozzle, a mixing section, a casing part for suction of secondary flow and a diffuser. It can induce the secondary flow or affect the secondary chamber pressure by both shear stress and pressure drop which are generated in the primary jet boundary. Ejector system is simple in construction and has no moving parts, so it can not only compress and transport a massive capacity of fluid without trouble, but also has little need for maintenance. Ejectors are widely used in a range of applications such as a turbine-based combined-cycle propulsion system and a high altitude test facility for rocket engine, pressure recovery system, desalination plant and ejector ramjet etc. The primary interest of this study is to set up an applicable model and operating conditions for an ejector in the condition of sonic and subsonic, which can be extended to the hydrogen fuel cell vehicle. Experimental and theoretical investigation on the sonic and subsonic ejectors with a converging-diverging diffuser was carried out. Optimization technique and numerical simulation was adopted for an optimal geometry design and satisfying the required performance at design point of ejector for hydrogen recirculation. Also, some sonic and subsonic ejectors with the function of changing nozzle position were manufactured precisely and tested for the comparison with the calculation results.

• Journal of Korean Society on Water Environment
• /
• v.22 no.4
• /
• pp.678-686
• /
• 2006

The feasibility of the high-hydrophilic biofilter was examined for application in rural wastewater treatment in Korea. The intermittent trickling biofiter was developed for wastewater treatment of media and examined instantaneous wetting water and immersional wetting water. Melamin foam absorbed 120 times it's weight in water and maintained wetting status than other materials. These characteristics are improvement for application in rural areas showing large variance of amount of influent. The biofilter process was effective in treating organic pollutants; mean removal efficiencies of $BOD_5$ and TSS were above 80%. The average SS concentrations of effluent was showed below $10mg/L^{-1}$ and meet guidelines in special regions, however, the average concentration of $BOD_5$ was about $20mg/L^{-1}$. The removals of T-N and T-P were relatively less effective and removal efficiencies were below 40%. It might meet the guidelines for T-P because of low levels of influent T-P concentration. However, the T-N concentration were too high and further treatment is required. The effluent concentration of $NH_4-N$ showed a significant reduction rate about 43.8%, but part of $NH_4-N$ was transformed to $NO_2-N$ and $NO_3-N$ inside the biofilter through nitrification process. The effluent concentration of org-P was removed about 78.8% of influent concentration by filtration. Considering stable performance and effective removal of pollutant in wastewater, low maintenance, and cost-effectiveness, the hydrophilic biofilter system was thought to be an effective and feasible alternative for decentralized rural areas.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.1
• /
• pp.12-20
• /
• 2014

The objective of this paper is to aid in basic directions for the countermeasure against marine accidents by using the statistical data of Jeju Coast Guard from 1983 to 2012. Marine accidents of about 600~1,000 vessels was reported in all the waters around South Korea from 2000 to 2008. From 2009, these accidents increased rapidly and reached 1,600~2,000 vessels. Although marine accidents of longline fishing vessels did not show a big change prior to 1993, the number have increased steadily until 2007. This is considered a tendency that appears when longline vessels, using the Port of Sungsanpo as a base and operating in fishing grounds in the East China Sea, are converted to long-term fishing from short-term fishing for reasons such as cost reduction due to the sudden rise of oil prices and the performance improvement of the fishing vessels. The number of vessels in marine accidents decreased gradually from 1999 to 2002 and for nearly 7 years from 2002 to 2008, the annual average of marine accidents stayed at 97 vessels. This is seemed to be the result of a change in the policy of either the central or local government and largely associated with changes in the way of statistical processing. This tendency is resulted in lower number of the accidents due to careless navigation which can be viewed as a human error than the number of marine accidents due to poor maintenance as a cause of mechanical failure in the same period. The increase rate in the marine accidents of Jeju Island-based fishing vessels is greater than that of other area-based fishing vessels among the fishing vessels operating in coastal and near sea around Jeju Island each year.

• The Journal of the Korean dental association
• /
• v.55 no.10
• /
• pp.676-687
• /
• 2017

Objectives : The aim of this study was to evaluate the effects of a composite of bone substitute and collagen barrier membrane (bone patch) for local ridge augmentation at peri-implant dehiscence defects on the clinical efficacy and positional stability in dogs. Materials and methods : Implant placement and ridge augmentation procedure were performed at surgically created peri-implant dehiscence defects in canine mandible (n=6). Four treatment modalities were randomly applied: i) bone patch group, ii) Guided bone regeneration (GBR) without pin fixation group (bone graft and collagen membrane), iii) GBR with pin fixation group, and iv) negative control group. After 12 weeks, clinical, micro-CT and histological analyses were performed. Results : Histologic analysis showed that bone patch group had similar results to GBR group and GBR with fixation group in terms of new bone formation. Micro-CT analysis revealed similar results to histologic analysis in terms of total volume maintenance. Operating time was shorter in bone patch group compared to GBR group and GBR with fixation groups. Conclusions : GBR using bone patch could simplify the ridge augmentation procedure with reduced operating time and equivalent biological performance compared to the conventional procedure.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.135-147
• /
• 2008

The results are as following. This study aimed to furnish basic data for improving the oral health of the elderly by conducting research into the relationship between denture satisfaction and the perceived oral health status of elderly people with removable dentures. The study performed research involving 246 elderly people who were living in Jeonju and Iksan, jeonbuk, and who were 65 years old or over from August 1 to December 5, 2007. The research method was a face-to-face interview. 1. The denture satisfaction of respondents for the research averaged $3.74{\pm}0.69$, and there was a significant difference in their satisfaction according to the level of education, the cohabitant family type, the procurement of living expenses, the performance of leisure activity, the period of current denture use, the number of denture changes, the experience during a dentist visit for denture maintenance, the experience of restricted activity due to annual oral diseases, and the opinions about denture prices. 2. 48.8% of respondents answered that their oral health status was good, and there was a significant difference in their satisfaction according to the procurement of living expenses, the total period of denture use, the period of current denture use, the number of denture changes, the experience of restricted activity due to annual oral diseases, and the opinions about denture prices. 3. The most highly influential variable affecting denture satisfaction was the opinions about denture prices(R=33.7%). 4. The most highly influential variable affecting the perceived oral health status was the educational level(R=17.3%). 5. As a result of analyzing the relationship between denture satisfaction and perceived oral health status, more respondents were satisfied with their dentures the more they thought their oral health status was in good shape.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.4 s.310
• /
• pp.35-44
• /
• 2006

The network induced transmission delay deteriorates the performance and stability of the real-time distributed control system on LonWorks over IP (LonWorks/IP) virtual device network (VDN). LonWorks/IP virtual device network is an integrated form of LonWorks device network and IP data network. The time delay in servo control on the LonWorks/IP-based VDN has highly stochastic nature. In the real-time distributed servo applications for predictive maintenance on the factory floor, timely response is essential.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.7
• /
• pp.1056-1063
• /
• 2015

In this paper, we develop an interface for aerial photograph platform which consists of a quadrotor and a gimbal using the human body and the head posture. As quadrotors have been widely adopted in many industries such as aerial photography, remote surveillance, and maintenance of infrastructures, the demand of aerial video and photograph has been increasing remarkably. Stick type remote controllers are widely used to control a quadrotor, but this method is not an intuitive way of controlling the aerial vehicle and the camera simultaneously. Therefore, a new interface which controls the serial photograph platform is presented. The presented interface uses the human head movement measured by head-mounted display as a reference for controlling the camera angle, and the human body posture measured from Kinect for controlling the attitude of the quadrotor. As the image captured by the camera is displayed on the head-mounted display simultaneously, the user can feel flying experience and intuitively control the quadrotor and the camera. Finally, the performance of the developed system shown to verify the effectiveness and superiority of the presented interface.

• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.62-65
• /
• 2018

The rapid progress toward the 4th industrial society has led to possibilities of fire increase. It is pointed out that, though initial fire suppression is emphasized, the current legal systems do not sufficiently recognize the importance of initial fire suppression. In order to resolve this, problems of the current legal systems and regulations, as well as fire-fighting facilities to be equipped according to the size of specific fire-fighting objects, were diagnosed. Also, suggestions for improvement were provided through comparative analysis with relevant laws and technical regulations of Korea and other countries. According to fire safety standards such as NFPA, IMO, ISO, and Russian standards, automatic fire extinguishers are to be installed as per the adaptability criteria of fire extinguishers and automatic fire extinguishers. In Korea, the "Act on Fire Prevention and Installation, Maintenance, and Safety Control of Fire-fighting Systems" cover the types and scope of fire fighting facilities that include specific fire protection objects, such as electric room, power room, and substation room. This study has identified that, in case of a place with a floor area of less than $300m^2$, the installation requirement is not clearly specified. Therefore, in this study, fire extinguishing equipment and automatic fire extinguishing equipment to be added for each sub-use application are proved to have fire extinguishing performance of Class A, Class B, and Class C, respectively. In view of the fact that, in overseas standards, all space except containing such materials as Deep fire, metal fire and peroxide, can be installed with fire fighting equipment, a legal system for specifying the capacity units of fire fighting apparatus by application is, in this study, proposed.