• 제목/요약/키워드: Performance evaluation of disaster prevention

검색결과 90건 처리시간 0.035초

침윤소화약제 성능평가를 위한 축소실험의 타당성 분석 (Validity Analysis of Scale Model Experiment for Wetting Agent Performance Evaluation)

  • 김남균;임경범;이동호
    • 한국화재소방학회논문지
    • /
    • 제28권2호
    • /
    • pp.14-19
    • /
    • 2014
  • 현재 국내의 침윤소화약제 기술기준은 표면장력에 대한 기준만 존재하여 이를 통한 약제의 성능평가는 어려운 실정이다. 따라서 침윤소화약제의 성능평가 기법을 제시하기 위해 축소모형 실험 장치를 통한 최적화된 성능평가 방법을 제시하고자 한다. 본 연구는 해외 기준인 NFPA 18의 실험과 자체 제작된 축소모형 실험 장치를 이용한 실험의 결과 비교분석을 통해 자체 제작 축소모형 실험 장치실험 결과의 타당성을 규명하고자 한다. 목화솜을 대상으로 침투성능만을 평가하는 NFPA 18 실험과 목분을 대상으로 침투성능과 소화성능을 모두 평가하는 축소모형 실험을 비교분석한 결과 NFPA 18의 실험과 자체 제작 축소모형 실험에서 모두 소화용수의 침투성에 관한 변별력을 확인할 수 있었다. 또한 자체 제작 축소모형 실험에서는 T/C를 통한 내부온도 측정을 통해 보다 명확한 변별력을 나타냄을 확인하였다.

전기비저항 측정을 이용한 콘크리트 응결시점 평가 (Setting Time Evaluation of Concrete Using Electrical Resistivity Measurement)

  • 이한주;임홍재
    • 콘크리트학회논문집
    • /
    • 제29권4호
    • /
    • pp.361-369
    • /
    • 2017
  • 고성능 콘크리트의 개발로 인해 다양해지는 배합비에 따라, 콘크리트 초기강도 발현 시점을 예측할 수 있는 응결시점에 대한 관심이 높아지고 있다. 기존의 콘크리트 응결시간 측정을 위해 사용되고 있는 관입저항시험은 습식체가름을 실시한 모르타르를 이용한 간접적인 측정법으로, 현장 타설된 콘크리트의 정확한 응결시간을 나타내기 어렵다. 따라서 콘크리트에 직접 측정이 가능한 초음파 속도 측정법, 수화열 측정법, 전기 임피던스 측정법 등 다양한 비파괴 평가 기법들이 제안되고 있다. 본 연구에서는 수화 반응에 따른 시멘트계 재료 내부 전기전도성 변화를 측정하는 4-전극법을 이용하여 콘크리트의 전기 비저항 측정 기법을 제안하고자 한다. 다양한 배합비에 따라 시멘트 페이스트, 모르타르, 콘크리트의 전기 비저항 측정을 실시하였으며, 배합 후 24시간 측정결과로부터 초기 전기비저항 값과 전기비저항 상승시기를 측정 변수로 제안하였다. 또한, 관입 저항 시험에 따른 초결, 종결 시점과의 비교 분석을 통해 콘크리트 응결시점 평가를 위한 제안 기법의 적용 가능성을 확인하였다.

철골브레이스에 의한 기존 RC건축물의 강도상승형 내진보강을 위한 설계고려사항 (The design considerations of steel braced frame for seismic retrofit through increasing the lateral strength of existing RC buildings)

  • 안충원;윤정환;송동엽;장범수;민찬기
    • 한국지진공학회논문집
    • /
    • 제17권6호
    • /
    • pp.293-303
    • /
    • 2013
  • This paper deals with steel braced frame as increasing the lateral strength and ductility in order to seismic retrofit of existing buildings and discusses the designing criteria and calculation method of retrofitted buildings. The addition of steel braced frame can be effective for increasing the lateral strength and ductility of existing buildings. However, There is a problem in utilizing this method. It is the approach to provide an adequate connection between the existing RC frame and the installed steel braced frame, because global strength by failure mode(three type) depends on detail of connection and strength of existing RC frame. So, the designer must be confirmed if it satisfies the required performance or not. Failure mode of type I is the most appropriate for increasing the lateral strength and ductility. Seismic performance evaluation and strength calculation of seismic retrofit are performed by guideline by KISTEC(Korea Infrastructure Safety & Technology)'s "seismic performance evaluation and rehabilitation of existing buildings" and Japan Building Disaster Prevention Association. Buildings are modeled and non-linear pushover analysis are performed using MIDAS program.

Hot Smoke Test를 이용한 주차장 환기설비의 제연 성능평가 (Evaluation of Smoke Control Performance of Ventilation System Using by Hot Smoke Test)

  • 정석환
    • 한국방재안전학회논문집
    • /
    • 제12권2호
    • /
    • pp.47-56
    • /
    • 2019
  • 주차장 화재 시 다량의 연기 발생으로 소방대원이 화점에 진입하기 곤란한 문제점을 극복하고자 최근 주차장 환기 목적으로 설치된 급 배기팬과 유인팬(Jet fan)을 이용하여 연기를 배출하는 방법을 이용하고 있다. 본 연구에서는 급배기팬만 동작하는 조건과 유인팬이 함께 동작하는 2가지 조건에서 연기층의 유동변화를 CCTV를 이용하여 관찰하였으며, 또한 hot smoke test가 주차장 환기 성능평가 방법으로서의 적정성을 평가하기 위해 플럼 주위의 온도를 Alpert eq.과 비교 분석하였다. 그 결과 jet fan을 동시에 동작시키는 경우 연기층이 교란될 수 있음을 확인할 수 있었으며, 그로인하여 초기 피난 장애 우려가 있을 것을 것으로 분석되었다. 다만, jet fan이 추가로 작동됨에 따라 배기성능은 향상되는 것을 관찰용 CCTV로 확인할 수 있었으며, 이는 진압전술을 펴는데 도움이 될 것으로 판단된다. 플럼 주변의 온도를 측정하여 Alpert eq과 비교한 결과 Plume 중심축에서 약 $2^{\circ}C$ 낮고 연기가 배출되는 방향으로 8 m에서는 $9.0^{\circ}C$ 높은 것으로 분석되었다. Plume 주변의 온도 측정 결과는 AS 4391-1999의 예상 최대 온도보다 낮았고 실험으로 인한 예상 온도 위험을 초과하지 않았다. 이 결과와 같이 고온 연기 시험의 진행으로 인한 온도 위험성이 예측 가능하기 때문에 관련 기준이 없는 주차장의 연기 제어 성능 평가를 위한 일반적인 평가 방법 중 하나로 활용 가능할 것이다.

Seismic Performance of High-Rise Intermediate Steel Moment Frames according to Rotation Capacities of Moment Connections

  • Han, Sang Whan;Moon, Ki-Hoon;Ha, Sung Jin
    • 국제초고층학회논문집
    • /
    • 제4권1호
    • /
    • pp.45-55
    • /
    • 2015
  • The rotation capacity of the moment connections could significantly influence on the seismic performance of steel moment resisting frames. Current seismic provisions require that beam-to-column connections in Intermediate Moment Frames (IMF) should have a drift capacity as large as 0.02 radian. The objective of this study was to evaluate the effect of the rotation capacity of moment connections on the seismic performance of high-rise IMFs. For this purpose, thirty- and forty-story high-rise IMFs were designed according to the current seismic design provisions. The seismic performance of designed model frames was evaluated according to FEMA P695. This study showed that the forty-story IMF satisfied the seismic performance objective specified in FEMA P695 when the rotation capacity of the connections was larger than 0.02. However, thirty-story IMFs satisfied the performance objective when the connection rotation capacity is larger than 0.03.

TMD 제어성능 개선을 위한 ETMD 개발 (Development of ETMD for Improving TMD Control Performance)

  • 전승곤
    • 한국지진공학회논문집
    • /
    • 제26권4호
    • /
    • pp.157-164
    • /
    • 2022
  • The TMD has a simpler structure than other vibration control devices and shows excellent control performance for the standardized vibration occurring in the structure. However, when the vibration cycle of the structure coincides with the vibration cycle of the TMD due to the sudden external loads, the off-tuning occurs, which threatens the structure while increasing the vibration width of the TMD. Therefore, Electromagnetic Tuned Mass Damper (ETMD) was developed as a semi-active TMD that prevents off-tuning while exhibiting excellent control performance like TMD. To verify the control performance of the developed ETMD, the bending behavior control performance evaluation experiment using a simple beam bridge was performed. The experimental method compared the mutual control power by experimenting with the existing TMD method and the developed ETMD under nine excitation frequency conditions. As a result, it was confirmed that the control effect of ETMD was about 4.85% higher than that of TMD at 3.02Hz, which generates the maximum displacement in the simple beam bridge. Also, the off-tuning occurred in some excitation conditions when using TMD, although the off-tuning did not occur when using ETMD. Therefore, the excellent control performance of the ETMD developed in this study was verified.

로드뷰를 활용한 보행자 사고 취약 지점 특징 분석 탐색적 연구: 부산광역시 사상구를 중심으로 (An Exploratory Study on the Analysis of Characteristics of Pedestrian Accident Vulnerable Points using Road View: Focusing on Sasang-gu, Busan)

  • 이동규;김재선;표경수;김민
    • 한국재난정보학회 논문집
    • /
    • 제20권2호
    • /
    • pp.351-368
    • /
    • 2024
  • 연구목적: 일반적으로 교통사고는 산발적으로 발생하기 때문에 예방 및 방지대책 마련을 위한 현장조사 시 시간적·비용적으로 다양한 한계가 있다. 특히, 코로나 사태 이후 비대면 사회로의 전환으로 현장조사를 대체할 방안 마련이 더욱 필요한 실정이며, 이에 본 연구에서는 부산광역시 사상구를 대상으로 다양한 웹사이트에서 제공하고 있는 로드뷰에 대한 현장조사 대체 활용 가능성을 평가하였다. 연구방법: 연구방법은 '16~'22년간 발생한 교통사고 취약지점을 추출하여 교통안전법 「교통안전진단지침」에서 제공하고 있는 현장조사 평가항목을 기반하여 로드뷰를 분석하였다. 연구결과: 주요 결과 사상구는 사상로, 대동로, 학장로 지점에서 고령 보행자 사고가 가장 취약하였다. 로드뷰를 통해 취약지점을 상세분석한 결과 사상로는 영업용 차량의 통제, 시장 상권에 대한 교통약자 보호 등이 필요하였다. 대동로는 불법 노상 주정차, 경사로 합류 구간 등이 취약하였고, 학장로는 과속이 쉬운 도로 등이 취약하였다. 이러한 분석 결과를 토대로 로드뷰의 현장조사 대체 가능성을 평가하였을 때, 로드뷰는 보·차도 분리성, 안전 시설물의 위치 및 간격 등 대부분 항목을 효과적으로 평가할 수 있었다. 하지만, 실측 수행 등 항목에서는 한계가 있었다. 결론: 즉, 로드뷰는 대부분의 현장조사를 대체할 수 있고, 실측 평가항목은 보조자료로 활용성을 높여 시간적·비용적 절감효과와 동시에 높은 효율성을 나타내는 것으로 판단할 수 있다.

축소모형 실험을 통한 침윤소화약제 소화성능 평가 (Wetting Agent Performance Evaluation Using Scale Model)

  • 김남균;임경범;이동호
    • 한국화재소방학회논문지
    • /
    • 제28권2호
    • /
    • pp.20-25
    • /
    • 2014
  • 본 연구는 자체제작 축소모형 실험 장치를 이용하여 목재를 대상으로 침윤소화약제의 소화성능평가를 수행하였다. 축소모형실험의 최적조건 확인을 위해 소화용수의 양과 목재의 수를 변화시켜 조건설정 실험을 진행한 결과 20 pieces의 목재를 적층한 후 물과 소화용수 100 mL를 살수한 경우에 한하여 소화성능의 변별력을 확인하였다. 따라서 해당 조건에서 현재 사용되고 있는 국내외 침윤소화약제를 대상으로 소화성능을 평가한 결과, 물의 경우에서만 재 발화가 발생하는 것을 확인하였다. 또한 살수 시간에 따른 온도분포를 통해 소화능력의 변별력을 판단할 수 있었다. 본 실험 결과를 바탕으로 추후 최적화 침윤소화약제 성능평가 방법을 제시하는데 기초자료로 활용할 수 있을 것으로 판단된다.

Analysis of bias correction performance of satellite-derived precipitation products by deep learning model

  • Le, Xuan-Hien;Nguyen, Giang V.;Jung, Sungho;Lee, Giha
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2022년도 학술발표회
    • /
    • pp.148-148
    • /
    • 2022
  • Spatiotemporal precipitation data is one of the primary quantities in hydrological as well as climatological studies. Despite the fact that the estimation of these data has made considerable progress owing to advances in remote sensing, the discrepancy between satellite-derived precipitation product (SPP) data and observed data is still remarkable. This study aims to propose an effective deep learning model (DLM) for bias correction of SPPs. In which TRMM (The Tropical Rainfall Measuring Mission), CMORPH (CPC Morphing technique), and PERSIANN-CDR (Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks) are three SPPs with a spatial resolution of 0.25o exploited for bias correction, and APHRODITE (Asian Precipitation - Highly-Resolved Observational Data Integration Towards Evaluation) data is used as a benchmark to evaluate the effectiveness of DLM. We selected the Mekong River Basin as a case study area because it is one of the largest watersheds in the world and spans many countries. The adjusted dataset has demonstrated an impressive performance of DLM in bias correction of SPPs in terms of both spatial and temporal evaluation. The findings of this study indicate that DLM can generate reliable estimates for the gridded satellite-based precipitation bias correction.

  • PDF

인공함양 원수확보를 위한 돌망태 보의 저류 및 취수성능에 관한 연구 (Water Storage and Intake Performance of Gabion Weirs during Recharge)

  • 한일영;김규범
    • 지질공학
    • /
    • 제29권4호
    • /
    • pp.393-403
    • /
    • 2019
  • 취수보의 저류성능은 유량과 수심의 관계로 평가될 수 있다. 돌망태 취수보의 유량과 수심의 관계는 채움재의 물리적 특성에 따라 달라진다. 본 연구에서는 인공함양 원수확보를 위한 돌망태 취수보의 저류성능을 평가하는데 활용할 기존의 방류량 산출식들을 검토하였다. 채움재의 물리적 특성을 실험변수들과 관계식으로 표현한 기존의 방류량 산출식은 유량과 수심의 관계를 잘 표현하였다. 또한 채움재의 평균입경은 수심확보와 간접취수에 영향을 미치기 때문에 저류성능 뿐 아니라 취수성능에도 중요한 인자임을 알 수 있었다.