• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2213-2220
• /
• 2017

This paper proposes an efficient approach for hardware implementation of moving object detection (MOD) processor using effective Gaussian mixture learning (EGML)-based background subtraction method. Arithmetic units used in background generation were implemented using LUT-based approximation to reduce hardware complexity. Hardware resources used for both background subtraction and Gaussian probability density calculation were shared. The MOD processor was verified by FPGA-in-the-loop simulation using MATLAB/Simulink. The MOD performance was evaluated by using six types of video defined in IEEE CDW-2014 dataset, which resulted the average of recall value of 0.7700, the average of precision value of 0.7170, and the average of F-measure value of 0.7293. The MOD processor was implemented with 882 slices and block RAM of $146{\times}36kbits$ on Virtex5 FPGA, resulting in 60% hardware reduction compared to conventional design based on EGML. It was estimated that the MOD processor could operate with 75 MHz clock, resulting in real-time processing of $800{\times}600$ video with a frame rate of 39 fps.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.746-754
• /
• 2016

Smart healthcare systems, a convergent industry based on information and communications technologies (ICT), has emerged from personal health management to remote medical treatment as a distinguished industry. The smart healthcare environment provides technology to deliver vital information, such as pulse rate, body temperature, health status, and so on, from wearable devices to the hospital network where the physician is located. However, since it deals with the patient's personal medical information, there is a security issue for personal information management, and the system may be vulnerable to cyber-attacks in wireless networks. Therefore, this study focuses on a key-development and device-management system to generate keys in the smart environment to safely manage devices. The protocol is designed to provide safe communications with the generated key and to manage the devices, as well as the generated key. The security level is analyzed against attack methods that may occur in a healthcare environment, and it was compared with existing key methods and coding capabilities. In the performance evaluation, we analyze the security against attacks occurring in a smart healthcare environment, and the security and efficiency of the existing key encryption method, and we confirmed an improvement of about 15%, compared to the existing cipher systems.

• Journal of Convergence for Information Technology
• /
• v.10 no.10
• /
• pp.1-8
• /
• 2020

The need for storage, management, and retrieval techniques for alternative data has emerged as technologies based on data generated from business activities conducted by enterprises have emerged as the key to business success in recent years. Existing big data platform systems must load a large amount of data generated in real time without delay to process unstructured data, which is an alternative data, and efficiently manage storage space by utilizing a deduplication system of different storages when redundant data occurs. In this paper, we propose a multi-layer distributed data deduplication process system using the similarity of the Cuckoo hashing filter technique considering the characteristics of big data. Similarity between virtual machines is applied as Cuckoo hash, individual storage nodes can improve performance with deduplication efficiency, and multi-layer Cuckoo filter is applied to reduce processing time. Experimental results show that the proposed method shortens the processing time by 8.9% and increases the deduplication rate by 10.3%.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.2
• /
• pp.30-35
• /
• 1996

It is well known that the improved methods of the estimation of the service power margin is necessary to design a optimum ship and to operate economically a ship. Unfortunately, most conventional methods of the predicting of the service power margin are not so accurate that attention should be payed to improve this. From this overview, it is importance with. the effects of waves, as recommended by the 15th and 16th International Towing Tank Conference in 1978 and l981. However the progress of research in this field is very slow mainly since it is taken so long time to take data about hull roughness according to ship ages. For instance, it would be taken 17 or 25 years to measure ideally the data for a ship. Moreover it would be also necessary to take data for many types of ships to lead a general solution. A relationship between roughness and ship age are studied in this paper considering full scale data. A comparison is also made between the effects of hull roughness and of weather at sea for the ship.

• Korean Journal of Optics and Photonics
• /
• v.31 no.5
• /
• pp.205-212
• /
• 2020

In the performance of a wind turbine system, the blades play a vital role. However, they are susceptible to damage arising from complex and irregular loading (which may even cause catastrophic collapse), and they are expensive to maintain. Therefore, it is very important both to find defects after blade manufacturing is completed and to find damage after the blade is used for a certain period of time. This study provides a new perspective for the detection of internal defects in glass-fiber- and carbon-fiber-reinforced panels, which are used as the main materials in wind turbine blades. A gap or fracture between fiber-reinforced materials, which may occur during blade manufacturing or operation, is simulated by drilling a hole 5 mm in diameter in the middle layer of the laminated material. Then, a digital-image-correlation (DIC) method is used to detect internal defects in the blade. Tensile load is applied to the fabricated specimen using a tensile tester, and the generated changes are recorded and analyzed with the DIC system. In the glass-fiber-reinforced laminated specimen, internal defects were detected from a strain value of 5% until the end of the experiment, while in the case of the carbon-fiber-reinforced laminated specimen, internal defects were detected from 1% onward. It was proved using the DIC system that the defect was detected as a certain level of strain difference developed around the internal defects, according to the material properties.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.106-112
• /
• 2008

Personalization is user oriented dynamic method based on user preferences for easy access to what users want to view or get. It has become more important in mobile domain with rapid growth of wireless Internet and mobile phone market after success of web based market and therefore, it can be applied to service of spatial analysis result. In this paper, spatial analysis using user profile and notification service methods are proposed as one of personalized spatial data service methods for mobile users. A service system for spatial analysis with user profile is designed to prove possibility of spatial analysis based on user preferences and notification service is also designedto show generated output can be sent to user's mobile devices efficiently to make users informed of preferred information. Prototype system is implemented and it is applied to real estate data that has many selectable conditions by users. Information service based on user preferences can be applied to spatial data by using proposed system and it is efficient when cache module is used to shorten response time. Various user models for application domains and performance evaluation methods need to be developed in the future.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.6
• /
• pp.6-11
• /
• 2010

Amount of power generated from solar photovoltaic can vary according to solar flux of sunlight due to nature of solar cell panel, and an angle that the sun and the surface of cell makes brings difference in amount of power generation. Solar flux is decided by location of surface of the Earth that is classified into longitude and latitude, but on the other hand, an angle that the sung and the surface of cell makes can be changed by changing the angle of a solar power generation device at the fixed location. A method of changing the angle of a solar power generation device as a measure for improving practical power generation efficiency. and studies about a solar tracking device for this are in active. This study conducted a research on a solar tracking system for improvement of solar power generation efficiency. A solar tracking system of this study is composed of a sensor part to confirm a location of the sun with a semiconductor photosensor using the photo conductive effect, and it analyzed output signal of a sensor by using microprocessor and it produced a control signal of driving part for tracking the sun. A solar power generator (25W) was produced to analyze performance of a solar tracking system and usefulness of a solar tracking device that was designed and produced in this study was confirmed through experiments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.221-231
• /
• 2013

Exchanging personal health information(PHI) is an essential process of healthcare services using information and communication technology. But the process have the inherent risk of information disclosure, so the PHI should be protected to ensure the reliability of healthcare services. In this paper, we designed encryption module for wearable personal health devices(PHD). A main goal is to guarantee that the real-time encoded and transmitted PHI cannot be allowed to be read, revised and utilized without user's permission. To achieve this, encryption algorithms as DES and 3DES were implemented in modules operating in Telos Rev B(16bit RISC, 8Mhz). And the experiments were performed in order to evaluate the performance of encryption and decryption using vital-sign measured by PHD. As experimental results, an block encryption was measured the followings: DES required 1.802 ms and 3DES required 6.683 ms. Also, we verified the interoperability among heterogeneous devices by testing that the encrypted data in Telos could be decoded in other machines without errors. In conclusion, the encryption module is the method that a PHD user is given the powerful right to decide for authority of accessing his PHI, so it is expected to contribute the trusted healthcare service distribution.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.3
• /
• pp.173-182
• /
• 2013

The building design projects which are being proceeded nowadays pursue a complex and various shape of structures, escaping from the traditional and regular shape of buildings. In this new trend of the architecture, there rises a demand of the research in the structural engineering for the effective realization of such complex-shaped buildings which disassembles the orthogonality of frames. As a distinguished characteristics of the buildings in a complex-shape, there frequently are inclined columns included in the structural frame. The inclined column causes extra axial force and bending moment at the beam-column connection so it is necessary to assess those effects on the structural behavior of the frame and the connection by experiment or analysis. However, with comparing to the studies on the normal beam-column connections, the inclined column connections have not been studied sufficiently. Therefore, this study evaluated the beam-column connections having an inclined column using nonlinear and finite element analysis method. In this paper, steel moment frames having inclined columns were analyzed by the nonlinear pushover analysis to check the global behavior and beam-column connection models were analyzed by the finite element analysis to check the buckling behavior and the fracture potentials.

• Korean Journal of Health Education and Promotion
• /
• v.22 no.4
• /
• pp.17-40
• /
• 2005

Objective: The purpose of the this study was to test the effect of the alcohol preventive educational program for elementary school students through developing the web-based learning instruments. It will prevent the serious alcohol problem for adolescents and be the opening-learning according to learner's needs beyond the traditional classroom learning which has limitation of space and time. Method: This research designed based on web-based instructional system design by In-sung Jong(1997). This study was performed on the elementary school students who are the six grade in M city. The number of experimental group was 72 and control group's number was 72, totaled 144. Data were collected from September, 30th, 2004 to November, 5th, 2004, totaled 37days. The pretest and the posttest for web-based alcohol preventive education program were tested about knowledge and attitudes toward drinking. After the performance, the posttest was also tested the effect of this program under items by the interest of web-based learning, satisfaction, adequateness of material and so on. The data analysis was done using SPSS/Win 11.0 program. Result: The results of this study are as follows: 1) Compared with control group, experimental group which was educated the web-based alcohol preventive educational program for elementary school students was improved the knowledge on drinking, thin there was no significant difference. However, it showed significant difference between two groups after education. It was, therefore, partially supported. 2) Compared with control group, the experimental group which was educated the web-based alcohol preventive educational program for elementary school students showed significant difference in attitudes toward drinking. After education, it showed no significant difference attitudes. toward drinking between experimental group and control group. It was, therefore, partially supported. 3) The degree of learning motivation was an average.595 of 1 after learning applied to by the web-based alcohol preventive educational program for elementary school students. Then, it is relatively more higher than the result of existing studies. So, it showed that the motivation was done well. 4) Correlation among study variables It showed that there was the significantly positive correlation between knowledge and attitudes toward drinking of pretest experimental group. Also, there was the significantly positive correlation between attitudes toward drinking and learning motivation of pretest and posttest experimental group. Conclusion: I found that the web-based educational program helps the elarning process for the health education in the school field which the instructional materials lack. As a result, the web-based education motivates the learner's pleasure and promotes the learners interest. Also, it is possible for students to learn according to their own learning pace, repeated learning and active learning participation in the necessary parts. Therefore, I think the web-based educational program is worth as a intervention to get positive influence for the health education.