• 제목/요약/키워드: Performance degree

검색결과 3,636건 처리시간 0.033초

동해안 오구굿 중 판염불에 나타난 불교음악의 영향 - 김장길의 소리를 중심으로 - (The influence with buddhist music appearing in PanYeombul out of Ogu exorcism of East coast - focused on the song by Kim Janggil -)

  • 서정매
    • 공연문화연구
    • /
    • 제34호
    • /
    • pp.277-313
    • /
    • 2017
  • 본 연구는 동해안 오구굿 중 김장길이 소리한 판염불의 악곡 중 6곡을 대상으로 선율을 분석하여 무가(巫歌) 판염불에 나타난 불교음악의 영향을 살펴본 것이다. 그 결과를 요약해보면 다음과 같다. 첫째, 2016년 10월 16일에 연행된 김장길의 판염불의 구성은 <창혼>, <예불>, <망자축원>, <장엄염불>, <대다라니>, <오방례>, <지장보살 정근>, <법성게>, <극락세계십종장엄>, <아미타불 정근>, <지옥가>로 구성된다. 다만 판염불은 같은 양중이 연행한다 하더라도 상황에 따라 더 추가되고 생략될 수 있으므로 그 절차구성은 매우 유동적이다. 그러나 김용택의 것과 비교했을 때 <지옥가> 외에 <대다라니>가 공통되는 것으로 보아 동해안 오구굿의 판염불에는 <대다라니>가 중요한 위치를 차지하는 것으로 보인다. 둘째, <대다라니>는 불가에서는 일반적으로 '신묘장구대다라니'라고 칭하고 있고 김용택도 이 명칭을 그대로 수용하고 있는데 반해, 김장길은 '염화장구대다라니'라고 하여 차별되는 명칭을 사용한다. 염화는 '손가락에 꽃을 집어들었다'는 뜻으로 불가적 의미이지만 보편적으로 사용하는 명칭이 아니다. 이로보아 김장길은 불경의 '대다라니'를 수용하되 차별된 명칭을 사용함으로써 불교의례와는 구별되는, 무의례만의 의미를 부여하고자 한 것으로 보인다. 셋째, 동해안 오구굿의 판염불은 크게 두 부분으로 나누어진다. 전반부의 <판염불>과 후반부의 <지옥가>이다. <판염불>은 양중이 앉아서 직접 징 반주를 하며 독송하고, <지옥가>는 양중이 꽹과리를 들고 일어서서 독송하는데 이때 악사들이 삼공잽이 장단으로 반주한다. 노래와 반주가 이중주처럼 주고받는 형식으로 이루어지므로 음악적으로도 가장 고조되고 강조된다. <판염불>은 판염불 지옥가로 구분해서 보기도 하지만, 한 명의 양중에 의해 독송되는 절차이므로 일반적으로 하나의 절차로 해석한다. 넷째, 김장길의 판염불에서 반주역할을 하는 징은 악구를 구분하고 악곡의 단락을 짓는 역할이다. 일자일음의 염불을 노래할 때, 숨을 고르거나 목을 가다듬는 등 호흡의 정리가 필요한데 이때 징이 그 사이를 메운다. 징은 악구를 구분하여 음악적 단락을 지어주므로, 가사의 전달을 명확하게 한다. 징의 리듬은 균등한 2소박을 제외하고는 대부분 3소박으로 이루어져 있으며, 암쇠(♩♪)보다는 숫쇠(♪♩)의 빈도가 압도적으로 많다. 또한 당김음이 자주 사용된다. 균등한 2소박의 반주에서도 엇박 또는 단장(短長) 리듬을 자주 사용하여 단조로운 균등리듬에 변화를 주어 음악적 활력을 준다. 이와 같은 엇박과 단장리듬은 긴장감을 자아내는 숫쇠리듬과 일맥상통하는 것으로, 양중 김장길만의 리듬특징으로 보아진다. 다섯째, 모든 악곡은 mi, sol, la, do, re의 5음구성이며, do'${\searrow}$la${\searrow}$sol${\searrow}$mi의 하행선율이 압도적으로 많다. 하행선율은 슬픈 느낌을 자아내는 것으로 망자에 대한 슬픔을 음악적으로 잘 표현한 것이므로, 김장길의 음악적 감각을 엿볼 수 있다. 악곡은 전체적으로 la${\searrow}$sol${\searrow}$mi의 완전4도 하행에서 sol의 시가가 짧게 나타나는 전형적인 메나리토리로 이루어져 있다. 여섯째, 김장길은 기존 염불의 가사를 수용하되 그대로 부르지 않고 그 사이사이에 '원왕생'이나 '나무아미타불' 등과 같은 가사를 삽입하였고 한문으로 구성된 예불가사에서는 '합소사~'와 같은 한글가사를 추가하였다. 또 슬픈 느낌을 표현하기위해 '이이이이이이이~'와 같은 구절을 삽입하기도 하였다. 이는 망자를 극락왕생하고자 하는 염원을 극대화함과 동시에 불교의 색채를 감소시키고 무속적인 느낌을 주고자한 것으로 보인다. 일곱째, 불교의 색채를 감소시키고자 하는 특징은 가사붙임새에서도 마찬가지이다. 예를 들어, <다게>의 끝 가사와 <칠정례>의 시작가사 사이에서는 일반적으로 휴지를 주어 단락을 구분하지만, 김장길은 오히려 휴지 없이 하나의 곡조로 진행하여 불교 독송의 색채감을 배제하였다. 선율도 일반 불교독송의 것과는 차별된다. 이는 불교의례문을 수용하되, 불가식의 염송과는 구별되는 무의례만의 특징을 부여하고자 하는 김장길의 의지로 해석된다. 여덟째, 분석한 곡목은 크게 4가지 장단으로 나눌 수 있다. 일정한 장단이 없는 <창혼> <망자축원>, 2소박의 균일한 장단의 <예불> <대다라니>, 3+2+3+2의 혼소박으로 된 10/8박자의 엇모리장단으로 된 <지장보살 정근>, 3+2+3의 혼소박으로 구성된 삼공잽이 장단의 <지옥가> 등 악곡에 따라 각기 구분되는 장단으로 이루어져있다. 이중 <지장보살 정근>은 불가에서도 자주 연행되는 의식이지만, 엇모리장단으로 되어서 무속적인 느낌을 자아내며, <지옥가> 역시 삼공잽이 장단으로 연주되어 동해안 무의례만의 특징을 이룬다.

자아이미지 일치성이 소매점자산과 고객의 재이용의도에 미치는 영향 (The Effect of Retailer-Self Image Congruence on Retailer Equity and Repatronage Intention)

  • 한상린;홍성태;이성호
    • 한국유통학회지:유통연구
    • /
    • 제17권2호
    • /
    • pp.29-62
    • /
    • 2012
  • 최근 유통환경과 소비자 라이프스타일의 변화 속에서 단순히 제품을 판매하고 유통시키는 것에 그치는 것이 아닌 소매점자산을 증대시켜 고객을 획득하고 유지할 수 있는 차별화된 경쟁우위가 필요하게 되었으며, 이러한 대안으로 소매점 이미지의 중요성이 날로 커지고 있다. 이에 따라, 본 연구는 소매점의 이미지와 자아이미지 일치성이라는 요인과 고객기반 소매점자산과의 구조적관계를 조사하여 소비자들의 재이용의도에 어떠한 영향을 미치는지를 알아보고자 하였다. 본 연구의 가장 큰 학문적 기여점은 소매점자산에 영향을 주는 자아이미지일치성이라는 선행 요인을 찾아내는데 있으며, 또한 소매점자산이 재이용의도에 강력한 선행요인임을 확인하는데 있어서 기존의 연구들이 보여준 Second-order Construct 유형의 소매점자산척도와 결과 변수간의 단일차원 인과관계가 아닌, 소매점자산을 구성하는 각각의 요인들과 재이용의도의 좀 더 구체적인 변수간의 구조적관계를 실증할 수 있게 되었다. 본 연구는 소매점과 자아의 이미지일치성을 두 가지 차원(실제 자아이미지일치성, 이상적 자아이미지일치성)으로 나누고 소매점자산의 구성요소인 소매점인지, 소매점연상, 지각된 소매점 품질, 소매점충성도에 어떠한 영향을 미치는가를 분석하고 자아이미지일치성을 토대로 평가된 소매점자산 요인들이 소매점의 재이용의도에 미치는 영향을 분석하여 소매점의 이미지의 관리와 투자에 대한 마케팅 측면의 중요성을 제시하고 있다. 연구모델에 대한 분석결과 소매점-실제 자아이미지일치성과 소매점-이상적 자아이미지일치성 모두 모두 소매점자산 요인들에 긍정적인 영향을 미쳤으며, 그 중 이상적 자아이미지일치성이 소매점자산 요인들에 미치는 상대적인 영향력이 더 크게 나타났다. 또한 소매점자산을 구성하는 각각의 요인들은 소비자의 소매점 재이용의도에 긍정적인 영향을 주는 것으로 나타났다. 이는 타겟 소비자들의 자아 이미지와 소매점의 상징적 이미지를 일치시키는 마케팅 노력을 통해 소비자들과 소매점 사이의 강력한 감정적 결속이 형성되어 해당 소매점의 자산을 높게 평가하고 지속적인 이용의도를 가져올 수 있음을 시사한다.

  • PDF

무경운(無耕耘) 파종기용(播種機用) 구체기(溝切器)의 견인특성(牽引特性)에 관(關)한 연구(硏究) (Study on the Tractive Characteristics of the Seed Furrow Opener for No-till Planter)

  • 나우정
    • 농업과학연구
    • /
    • 제5권2호
    • /
    • pp.149-157
    • /
    • 1978
  • 동력경운기용(動力耕耘機用) 두류(豆類)의 무경운(無耕耘) 파종기(播種機)에 부착(附着)하여 사용(使用)하는 구절기중(溝切器中)에서 소요색인력(所要索引力)이 작고 구절작업정도(溝切作業精度)가 양호(良好)한 구절기(溝切器)의 개발(開發)을 위(爲)한 기초자료(基礎資料)를 얻기 위(爲)하여 구동식(驅動式) 토조(土槽)에 인공토양(人工土壤)을 채우고 원판형(圓板型) 및 호우형(型) 구절기(溝切器)의 소요색인력(所要索引力)과 이에 영향(影響)을 미치는 인자(因子)들과의 관계(關係)를 구명(究明)코자 실내모형(室內模型) 실험(實驗)을 실시(實施)하여 다음과 같은 결과(結果)를 얻었다. 원판형(圓板型) 구절기(溝切器)에 대(對)하여 직경별(直徑別)로 조립각(組立角)을 $8^{\circ}$$16^{\circ}$, 경심(耕深)을 3cm와 6cm로 변화(變化)시키년서 2.75cm/sec의 속도(速度)로 색인력(索引力)을 측정(測定)한 결과(結果) 원판(圓板)의 직경(直徑)이 약(約) 28cm인 경우(境遇)에 색인력(索引力)이 최소(最少)로 나타났고, 직경(直徑)이 이보다 크거나 작은때는 색인력(索引力)은 증가(增加)하는 경향(傾向)을 나타냈으며 비저항(比抵抗)도 대체(大體)로 비슷한 경향(傾向)이었으나 원판(圓板)의 직경(直徑)이 약(約) 30cm일 때 최소(最少)로 나타났다. 종자파종(種子播種)의 심도조절(深度調節)을 목적(目的)으로 작구심(作溝深)(3cm 및 6cm)과 색인력(索引力)과의 관계(關係)를 조사(調査)하였던 바, 경심(徑深)과 색인력(索引力)과의 관계(關係)는 거의 직선적(直線的)인 변화(變化)를 나타냈으며 색인력(索引力)에 영향(影響)을 미치는 인자중(因子中)에서 경심(耕深)의 영향(影響)이 가장 컸음을 알 수 있었다. 일반적(一般的)으로 조립각(組立角) 및 주행속도(走行速度)에 별(別) 영향(影響)없이 경심(耕深) 3cm 및 6cm 공(共)히 색인력(索引力)은 직경(直徑) 약(約) 28cm에서, 비저항(比抵抗)은 약(約) 30cm에서 최소(最少)의 값을 나타내었다. 파종기(播種機)의 작업성능(作業性能)과 관계(關係)가 갚은 주행속도(走行速度) 및 파건(播巾)의 조절(調節)을 목적(目的)으로 원판(圓板)의 조립각(組立角)과 주행속도(走行速度)가 색인력(索引力)에 미치는 영향(影響)을 조사(調査)했던 바, 조립각(組立角)과 주행속도(走行速度)가 증가(增加)함에 따라 모두 색인력(索引力)이 증가(增加)하는 경향(傾向)을 나타내었으나 색인력(索引力)에 미치는 영향(影響)은 주행속도(走行速度)가 더욱 크게 나타났다. 원판형(圓板型) 구절기(溝切器)와 호우형(型) 구절기(溝切器)를 비교(比較)하기 위(爲)하여 쐐기각(角)이 $16^{\circ}$이고 리프트각(角)이 $20^{\circ}$인 호우형(型) 구절기(溝切器)와 조건(條件)이 비슷한 조립각(組立角) $16^{\circ}$의 원판형(圓板型) 구절기(溝切器)의 색인특성(索引特性)을 비교(比較)한 결과(結果) 직경(直徑) 30cm인 원판형(圓板型)의 경우(境遇)는 비저항(比抵抗)이 $0.35{\sim}0.5kg/cm^2$인데 비(比)해 호우형(型)의 경우(境遇)는 $0.71{\sim}1.02kg/cm^2$로 나타나 호우형(型)의 색인비저항(索引比抵抗)이 평균(平均) 2배정도(倍程度) 크게 나타났고 작구상태(作溝狀態)도 원판형(圓板型)의 경우(境遇)보다 불량(不良)하였다.

  • PDF

주의력결핍과잉행동장애 치료 약물 Methylphenidate IR의 순응도 연구 (COMPLIANCE STUDY OF METHYLPHENIDATE IR IN THE TREATMENT OF ADHD)

  • 황준원;조수철;김붕년
    • Journal of the Korean Academy of Child and Adolescent Psychiatry
    • /
    • 제15권2호
    • /
    • pp.160-167
    • /
    • 2004
  • 목 적:주의력결핍과잉행동장애(Attention Deficit Hyperactivity Disorder:ADHD) 치료를 위해 가장 흔하게 사용되는 속방형 메틸페니데이트(methylphenidate-immediate releasing form:MPH-IR)에 대한 약물 순응도 연구는 매우 제한적이었다. 이에 본 연구에서는 외래를 통한 평균 1년 기간의 약물치료 과정에서의 약물 순응도를 평가하고, 관련 요인을 분석하였다. 방 법:2002년 9월부터 2002년 12월까지 외래를 처음 방문하여, DSM-Ⅳ에 근거한 ADHD 진단을 받고 MPHIR로 약물치료를 시작한 환아들 중 선별기준에 합당하고, 배제기준에 해당되지 않는 환아를 무작위 선발을 하여 100명의 대상 환아를 모집하였다. 상기 환아들을 대상으로 2003년 3월부터 4월까지 약물순응도에 대한 설문조사를 실시하였고, 설문조사 후 6개월이 경과한 시점인 2003년 10월, 동일 100명의 환아에 대한 인구사회학적 정보, 발달력, 가족력, 공존장애, 약물치료력, 약물 반응, 약물순응도를 평가하였고, 심리학적 평가로서, 지능검사, 기초학습검사, 주의력장애진단 검사결과를 조사하였다. 이를 통해 평균 치료기간 1년 동안의 약물치료 순응도를 평가하였고, 순응도에 관련된 다양한 변인들을 조사하였다. 결 과:1) 평균 약물치료기간 6개월이 되는 시점인, 2003년 3월에 실시한 약물순응도 설문조사에서, 치료효과 만족도는 60%였고, 오전처방 순응율은 81%, 오후처방 순응율은 43%로 큰 차이를 보였다. 2) 평균 약물치료 기간 1년이 되는 시점인 2003년 10월의 조사에서는, 외래 약물치료를 지속적으로 받는 아동이 62%였고, 38%는 약물치료를 자의로 중단하였다. 3) 약물치료 탈락군(비순응군)과 지속적인 치료를 받고 있는 군(순응군) 사이에 임상적 특성을 비교하였을 때, 부모학력, 사회경제상태, 아동 나이 및 성별 등 인구사회학적 변인들에서 차이는 발견되지 않았고, 아동의 발달력, 출산 및 주산기 문제, 의학적 문제, ADHD 외 공존병리 등에서도 차이는 발견되지 않았다. 심리학적 변인에서는 지능에서 유의한 차이가 있었다. 순응군이 전체지능지수, 언어 및 동작성 지능 지수가 유의하게 높았고, 상식, 산수, 토막짜기 점수도 유의하게 높았다. 약물치료력에 있어서는 임상가가 평가한 약물 반응이 순응군에서 유의하게 높았고, 약물 용량도 순응군이 유의하게 높았으며, 오후 약물 순응율(2003년 3월 평가)도 유의하게 순응군이 높았다. 또한 주치의의 지휘에 따라서도 순응율에 차이를 보였다. 결 론:국내에서는 최초로, 외래 치료를 받고 있는 ADHD 아동에 대한 MPH-IR 순응도를 조사하였다. 평균 1년 치료기간동안의 순응도는 62%로 외국에서의 연구결과와 유사하였으며, 지능이 높을 때, 약물반응이 우수하고, 약물용량이 높으며, 오후약물에 대한 순응이 초기에 높을 때 약물 순응률이 보다 높았다. 결국 약물치료 효과에 대한 만족도가 순응률 결정에 가장 중요한 요인이라고 생각되며, 약물치료효과를 높이기 위한 다양한 전략을 사용하여, 약물 순응도를 향상 시킬 필요가 있다고 생각된다.

  • PDF

일상적인 운동 부하 게이트 심근 관류 SPECT에서 $^{99m}Tc-sestamibi$ 폐섭취 : 좌심실 구혈률과 관류 결손 정도와의 비교 (Lung Uptake of $^{99m}Tc-sestamibi$ during Routine Gated Exercise SPECT Imaging : Comparison with Left Ventricular Ejection Fraction and Severity of Perfusion Defect)

  • 정신영;이재태;배진호;안병철;이규보
    • 대한핵의학회지
    • /
    • 제37권2호
    • /
    • pp.83-93
    • /
    • 2003
  • 배경 및 목적: $^{201}Tl$ 심근 관류 SPECT에서, 폐-심장 섭취비(lung-to-heart uptake ratio; LHR)의 정량적 측정은 관동맥 질환자의 예후를 평가할 수 있는 지표이다. 그러나 최근$^{99m}Tc-sestamibi$ (MIBI)를 이용한 심근 관류 SPECT가 많이 이용되고 있으나 MIBI의 폐섭취가 관동맥 질환자에 $^{201}Tl$ LHR와 같은 의미를 가지는 지는 의문이 있어왔다. 본 연구는 MIBI 주사후 1시간에 촬영한 전면상을 이용하여 LHR을 구하여 좌심실 구혈률, 관류 결손 정도와의 상관 관계를 알아보고자 하였다. 대상 및 방법: Bruce법으로 운동 부하를 실시한 241명(남성 130명, 평균 연령 55세)을 대상으로 하였다. 부하검사와 휴식기 검사를 같은 날에 실시하는 프로토콜(1일 영상법)은 152명, 다른 날에 실시하는 프로토콜(2일 영상법)은 89명에서 시행하였다. 운동 부하 SPECT는 MIBI를 주사한 후 1시간에 이중헤드 감마 카메라를 이용하여 얻었다. 폐와 심장의 MIBI 섭취 정도는 20초간 얻은 전면상에서 폐와 심장에 관심영역을 설정하여 구하고, 이를 이용하여 섭취비를 계산하였다. AutoQUANT 소프트 웨어를 이용한 자동화 방법으로 운동부하시 좌심실 구혈률(LVEF)을 구하였고 운동부하시 관류 결손 정도(Summed Stress Score, SSS)를 구하였다. LVEF에 따라 3군(35%이하, 36-50%, 50%초과), SSS에 따라 4군(4미만, 4-8, 9-13, 13초과)으로 나누었다. 증가된 LHR의 정의는 관류 결손이 없는 남, 여 각 군에서 구한 LHR의 평균값에 표준편차의 2배값을 더한 값을 초과하는 것으로 판단하였고 각 군에서 증가된 LHR을 보인 환자의 분포를 구하여 비교하였다. 결과: 정상 관류 소견을 보였던 130명의 분석에서, 여성에 비해 남성에서 LHR이 유의하게 높았고 정상 관류 소견을 보였던 130명의 남성과 여성 모두에서, 1일 영상법와 2일 영상법을 실시한 군 사이의 LHR은 의미 있는 차이가 관찰되지 않았다. 정상 관류 소견을 보인 군과 관류 결손을 보인 군 사이의 비교에서는 관류 결손이 있는 남성과 여성에서 관류 결손이 없는 남성과 여성에 비해 LHR이 유의하게 높았다. 관류 결손이 있는 111명의 분석에서는 LHR과 EF는 역상관 관계, LHR과 SSS 사이에는 양의 상관 관계가 관찰되었고, 남성에서는 통계학적 의의가 있었으나 여성에서는 통계학적 의의는 없었다. EF군에 따른 분석에서는 좌심실 구혈률이 낮을수록 LHR이 높았고, SSS군에 따른 분석에서 관류 결손이 높은 군에서 유의하게 LHR가 높았다. 결론: 일상적인 운동부하 심근 관류 SPECT상 관류 결손이 있는 환자에서 폐심장 섭취비는 좌심실 구혈률과 심근 부하시 관류 결손 정도가 클수록 증가된 폐-심장 섭취비를 보인 환자가 많았으며, 좌심실 구혈률이 낮을수록 그리고 관류 결손의 정도가 클수록 폐-심장 섭취비가 증가하였다 이런 결과로 보아 주사후 1시간 $^{99m}Tc-MIBI$의 LHR은 좌심실 부전과 큰 관류 결손을 나타내는 간접적인 지표로 생각되어 진다. 그러나 관류 결손의 정도나 좌심실 구혈률 감소 정도가 미약한 군에서는 폐-심장 섭취비가 정상군과 비슷하여, 저위험군의 감별에는 제하점이 있다.

인터넷 쇼핑몰 수용에 있어 사용자 능력의 조절효과 분석 (An Analysis of the Moderating Effects of User Ability on the Acceptance of an Internet Shopping Mall)

  • 서건수
    • Asia pacific journal of information systems
    • /
    • 제18권4호
    • /
    • pp.27-55
    • /
    • 2008
  • Due to the increasing and intensifying competition in the Internet shopping market, it has been recognized as very important to develop an effective policy and strategy for acquiring loyal customers. For this reason, web site designers need to know if a new Internet shopping mall(ISM) will be accepted. Researchers have been working on identifying factors for explaining and predicting user acceptance of an ISM. Some studies, however, revealed inconsistent findings on the antecedents of user acceptance of a website. Lack of consideration for individual differences in user ability is believed to be one of the key reasons for the mixed findings. The elaboration likelihood model (ELM) and several studies have suggested that individual differences in ability plays an moderating role on the relationship between the antecedents and user acceptance. Despite the critical role of user ability, little research has examined the role of user ability in the Internet shopping mall context. The purpose of this study is to develop a user acceptance model that consider the moderating role of user ability in the context of Internet shopping. This study was initiated to see the ability of the technology acceptance model(TAM) to explain the acceptance of a specific ISM. According to TAM. which is one of the most influential models for explaining user acceptance of IT, an intention to use IT is determined by usefulness and ease of use. Given that interaction between user and website takes place through web interface, the decisions to accept and continue using an ISM depend on these beliefs. However, TAM neglects to consider the fact that many users would not stick to an ISM until they trust it although they may think it useful and easy to use. The importance of trust for user acceptance of ISM has been raised by the relational views. The relational view emphasizes the trust-building process between the user and ISM, and user's trust on the website is a major determinant of user acceptance. The proposed model extends and integrates the TAM and relational views on user acceptance of ISM by incorporating usefulness, ease of use, and trust. User acceptance is defined as a user's intention to reuse a specific ISM. And user ability is introduced into the model as moderating variable. Here, the user ability is defined as a degree of experiences, knowledge and skills regarding Internet shopping sites. The research model proposes that the ease of use, usefulness and trust of ISM are key determinants of user acceptance. In addition, this paper hypothesizes that the effects of the antecedents(i.e., ease of use, usefulness, and trust) on user acceptance may differ among users. In particular, this paper proposes a moderating effect of a user's ability on the relationship between antecedents with user's intention to reuse. The research model with eleven hypotheses was derived and tested through a survey that involved 470 university students. For each research variable, this paper used measurement items recognized for reliability and widely used in previous research. We slightly modified some items proper to the research context. The reliability and validity of the research variables were tested using the Crobnach's alpha and internal consistency reliability (ICR) values, standard factor loadings of the confirmative factor analysis, and average variance extracted (AVE) values. A LISREL method was used to test the suitability of the research model and its relating six hypotheses. Key findings of the results are summarized in the following. First, TAM's two constructs, ease of use and usefulness directly affect user acceptance. In addition, ease of use indirectly influences user acceptance by affecting trust. This implies that users tend to trust a shopping site and visit repeatedly when they perceive a specific ISM easy to use. Accordingly, designing a shopping site that allows users to navigate with heuristic and minimal clicks for finding information and products within the site is important for improving the site's trust and acceptance. Usefulness, however, was not found to influence trust. Second, among the three belief constructs(ease of use, usefulness, and trust), trust was empirically supported as the most important determinants of user acceptance. This implies that users require trustworthiness from an Internet shopping site to be repeat visitors of an ISM. Providing a sense of safety and eliminating the anxiety of online shoppers in relation to privacy, security, delivery, and product returns are critically important conditions for acquiring repeat visitors. Hence, in addition to usefulness and ease of use as in TAM, trust should be a fundamental determinants of user acceptance in the context of internet shopping. Third, the user's ability on using an Internet shopping site played a moderating role. For users with low ability, ease of use was found to be a more important factors in deciding to reuse the shopping mall, whereas usefulness and trust had more effects on users with high ability. Applying the EML theory to these findings, we can suggest that experienced and knowledgeable ISM users tend to elaborate on such usefulness aspects as efficient and effective shopping performance and trust factors as ability, benevolence, integrity, and predictability of a shopping site before they become repeat visitors of the site. In contrast, novice users tend to rely on the low elaborating features, such as the perceived ease of use. The existence of moderating effects suggests the fact that different individuals evaluate an ISM from different perspectives. The expert users are more interested in the outcome of the visit(usefulness) and trustworthiness(trust) than those novice visitors. The latter evaluate the ISM in a more superficial manner focusing on the novelty of the site and on other instrumental beliefs(ease of use). This is consistent with the insights proposed by the Heuristic-Systematic model. According to the Heuristic-Systematic model. a users act on the principle of minimum effort. Thus, the user considers an ISM heuristically, focusing on those aspects that are easy to process and evaluate(ease of use). When the user has sufficient experience and skills, the user will change to systematic processing, where they will evaluate more complex aspects of the site(its usefulness and trustworthiness). This implies that an ISM has to provide a minimum level of ease of use to make it possible for a user to evaluate its usefulness and trustworthiness. Ease of use is a necessary but not sufficient condition for the acceptance and use of an ISM. Overall, the empirical results generally support the proposed model and identify the moderating effect of the effects of user ability. More detailed interpretations and implications of the findings are discussed. The limitations of this study are also discussed to provide directions for future research.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하;최재갑
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.17-48
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

  • PDF

R&D 기술 선정을 위한 시계열 특허 분석 기반 지능형 의사결정지원시스템 (An Intelligent Decision Support System for Selecting Promising Technologies for R&D based on Time-series Patent Analysis)

  • 이충석;이석주;최병구
    • 지능정보연구
    • /
    • 제18권3호
    • /
    • pp.79-96
    • /
    • 2012
  • 기술의 발전과 융합이 빠르게 이루어지고 있는 오늘날 유망기술을 어떻게 파악하여, 다양한 후보군들 중에서 최적의 R&D 대상을 어떻게 선정할 것인가에 대한 문제는 주요한 경영의사결정문제 중 하나로 부상하고 있다. 본 연구에서는 이러한 R&D 기술 선정 의사결정을 지원할 수 있는 새로운 지능형 의사결정지원시스템을 제안한다. 본 연구의 의사결정지원시스템은 크게 3가지 모듈로 구성되는데, 우선 첫 번째 모듈인 '기술가치 평가' 모듈에서는 기업이 관심을 갖고 있는 분야의 특허들을 분석하여 유망기술 파악에 요구되는 다양한 차원의 기술가치 평가지수 값들을 산출하는 작업이 이루어진다. 이를 통해, 현재 시점에서의 각 기술의 가치가 다양한 차원에서 평가가 이루어지고 나면, 두 번째 모듈인 '미래기술가치 예측' 모듈에서 이들의 시간 흐름에 따른 변화를 학습한 인공지능 모형을 토대로 각 후보기술들이 미래 시점에 어떤 가치지수값을 갖게 될 것인지 예측값을 산출하게 된다. 마지막 세 번째 모듈인 '최적 R&D 대상기술 선정 지원' 모듈에서는 앞서 두 번째 모듈에서 산출된 각 차원별 예상 가치지수값들을 적절히 가중합하여 기술의 종합적인 미래가치 예측값을 산출하여 의사결정자에게 제공하는 기능을 수행한다. 이를 통해 의사결정자가 자사에 적합한 최적의 R&D 대상기술을 선정할 수 있도록 하였다. 본 연구에서는 제안된 시스템의 적용 가능성을 검증하기 위해, 10년치 특허데이터에 인공신경망 기법을 적용하여 실제 기술가치 예측모형을 구축해 보고, 그 효과를 살펴본다.

흡연예방교육에 의한 청소년들의 흡연에 대한 지식 및 태도변화와 흡연량의 감소 효과 (Effectiveness of Smoking Prevention Program based on Social Influence Model in the Middle School Students)

  • 노원환;강복수;김석범;이경수
    • 농촌의학ㆍ지역보건
    • /
    • 제26권1호
    • /
    • pp.37-56
    • /
    • 2001
  • 경상북도 구미시에 소재한 2개 남자 중학교 1학년 학생 665명(교육군 10개 학급 367명, 대조군 8개 학급 298명)을 대상으로 1999년 4월부터 2000년 4월까지 교육군과 대조군으로 구분하여 시행한 지역사회에서의 준실험설계 연구를 통하여 흡연예방과 금연을 위한 교육프로그램이 학생들의 흡연에 대한 지식과 태도를 변화시키는 정도와 흡연율에 미치는 영향을 분석하고, 이들 변화와 관련되 요인을 분석하는 것에 목적을 두고 시행한 본 연구의 그 결과는 다음과 같다. 교육군과 대조군의 흡연에 대한 지식점수의 변화는 교육군에서 1.31점으로 대조군의 0.13점에 비하여 유의한 차이를 보였다(p<0.01). 교육군의 흡연에 대한 사전조사에서의 태도점수는 13점 만점에 $9.89{\pm}2.51$점이었고, 1년 후에는 $10.16{\pm}2.32$점이었고, 대조군은 사전조사에서의 $9.86{\pm}2.64$점이었고, 1년 후에는 $9.12{\pm}3.09$점이었다. 태도점수의 변화는 교육군에서 0.27점으로 대조군의 -0.74점에 비하여 유의한 차이를 보였다(p<0.05). 흡연에 때한 법적 제제에 대한 태도 중에서 담배광고 금지에 대한 교육군에서 사전조사에서 42.8%가 담배광고금지를 찬성하였으며, 주적조사에서는 54.2%가 찬성하여 유의한 변화를 보였으며(p<0.05), 교육군과 대조군의 변화를 비교하면 교육군과 대조군에서 각각 11.4%와 3.0% 포인트 변화하여 두 군간의 변화가 유의한 차이가 있었다(p<0.05). 담배자판기 설치를 반대하는 비율은 교육군에서는 4.6% 포인트 상승하였고, 대조군에서 각각 -11.1%감소하여 두 군간에 유의한 차이가 있었다(p<0.01). 성인이 되어 흡연을 할 의향이 있는 흡연 의도율은 교육군이 사전조사와 추적조사에서 각각 24.3%와 24.8%로 거의 변화가 없었고, 대조군은 26.5%와 32.2%로 5.7% 포인트 증가하였다. 교육군에서 대조군에 비하여 유의하게 낮았다(p<0.05). 친구의 흡연 권고를 거절할 수 있다는 비율은 교육군에서 사전조사와 추적조사에서 각각 90.2%와 88.3%로 1.9% 포인트 감소한 반면, 대조군에서는 사전조사와 추적조사에서 각각 86.39와 76.2%로 10.7% 포인트 감소하여 유의하게 감소하였다(p<0.01). 교육군과 대조군간에도 유의한 차이가 있었다(p<0.01). 흡연율은 교육군과 대조군에서 각각 1.6%와 1.7%에서 1년 후 2.7%와 3.0%였으며, 통계적으로 유의한 차이는 없었다. 흡연량은 교육군에서는 $3.7{\pm}8.2$개피에서 $1.4{\pm}2.5$개피로 일일 평균 흡연량이 2.3개피 감소하여 유의하게 감소하였고(p<0.05), 대조군의 경우는 $2.9{\pm}7.1$개피에서 3.1개피로 다소 증가하였다. 흡연에 대한 지식점수의 변화를 종속변수로 한 다중회귀분석에서는 지식점수의 변화에 유의한 영향을 미치는 변수는 흡연예방교육여부와 흡연에 대한 사전지식점수, 학생의 학교성적이었다. 흡연에 대한 태도 접수의 변화를 종속변수로 한 다중회귀분석에서는 흡연예방교육여부와 흡연에 대한 사전지식점수가 유의한 변수였다. 이상의 결과로 볼 때 사회영향모델에 의한 학교에서의 학생에 대한 흡연예방교육과 상담 및 교내환경과 학교주변 환경의 변화를 위한 사회영향 모형에 의한 교육 프로그램에 의하여 학생들의 흡연에 대한 지식과 태도와 흡연 의도율 등을 유의하게 변화시킬 수 있었으며, 흡연량은 유의하게 감소하였다. 향후 장기적인 추적을 통한 코호트 연구를 통하여 흡연율 감소효과를 평가하여야 할 것이며, 단순한 지식을 제공하는 일회성의 단편적 교육에서 벗어나 학생자신은 물론 학생주변 환경의 변화를 포괄하는 다양한 방법에 의한 흡연예방과 금연교육이 시행되어야 할 것이다.

  • PDF