• Title/Summary/Keyword: Performance Standard

Search Result 6,942, Processing Time 0.036 seconds

Evaluation of Shear Bond Strength and Adhesive Bond Durability of Mixed Species Structural Glued Laminated Timber (이수종 구조용집성재의 전단접착력 및 접착내구성 평가)

  • Shim, Sangro;Yeo, Hwanmyeong;Shim, Kugbo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.33 no.1 s.129
    • /
    • pp.87-96
    • /
    • 2005
  • This study was carried out to evaluate the shear bond strength and adhesive bond durability of structural glued laminated timber (glulam) manufactured with mixed species lumber of Korean red pine, Korean pine and Japanese larch, using resorcinol adhesive and water-based polymeric-isocyanate adhesive (WPI). Each board used as a glulam lamina was graded by visual inspection. The visual lumber grade of the all species was very low due to the large size and number of knots and the steep slope of grain. In view of the results, appropriate pruning, sawing and drying processes might be needed to produce high grade lamina lumber with small knot size and drying defect free. Shear bond strength of every tested glulam specimen ranged between 7.9 and $9.9N/mm^2$, and much higher than the Korean Standard (KS) for glulam shear bond strength, $7.1N/mm^2$. There was not much shear bond strength difference between wood/resorcinol and wood/WPI. The resorcinol adhesive bond durability exceeded KS requirements. However, delamination on the end-grain surfaces of WPI glulam submerged in both room temperature and boiling water severely occurred, and its durability did not meet KS requirements. Further investigations may be required, and special care should be taken, to ensure long service life of WPI glulam used for exterior application. Results of this study are expected to be useful for improvement of mechanical properties and structural performance of mixed species glulam.

Standards of Due Diligence and Separation of Responsibilities in the Division of Labor in Medicine (분업적 의료행위에 있어서 주의의무위반 판단기준과 그 제한규칙들)

  • Choi, Hojin
    • The Korean Society of Law and Medicine
    • /
    • v.19 no.2
    • /
    • pp.41-72
    • /
    • 2018
  • In the division of labor (or teamwork) in medicine, the responsibility of medical and nursing staff should be separated or distributed to justify negligent criminal offenses. The present work refers to the standards by which the due diligence and responsibility of the individual persons are to be determined and delimited. In this context, it has been proven that objective theory as a measure of due diligence is appropriate. From a moral point of view, when assessing due diligence, it makes sense to impose greater individual or higher performance demands on the perpetrator, but law and order require that due diligence should result from socially relevant human behavior. To give objective measure of negligence and to provide the highest level of personal responsibility, so that man can not be burdened too much responsibility and it is accordingly with an equality theorem. Afterwards some points are presented, which should be considered in a concrete fact in the determination of the medical negligence. Medical action has specific characteristics such as professionalism, discretionary and exclusive, unbalance of information. These characteristics distinguish medical actions from general negligence. The general level of knowledge, the urgency, working condition and working environment of the medical facility, duration of the professional practice, assessment of the medical activity are crucial in this context. As a standard of delineation of due diligence, I have used the permitted risk and the principle of trust. In the horizontal division of labor, the principle of trust applies. The principle of trust applies in principle in cases of division of labor interaction, when doctors in the same hospital exercise their own specific occupational field or everyone works in another hospital. However, this is not true for every case. In the vertical division of labor, the principle of trust does not apply and the senior physician can not trust the assistant doctors. In this case, the principle of trust is converted into a duty of supervision for assistant doctors by the senior physician. This supervision requirement could be used as a random check.

Development of an Automatic Liquid Feeder for Early Weaned Piglets (조기이유 자돈용 액상사료 자동급이기 개발)

  • 유용희;정일병;안정대;이덕수;강희설;최희철;전병수;박홍석
    • Journal of Animal Environmental Science
    • /
    • v.7 no.1
    • /
    • pp.1-12
    • /
    • 2001
  • This study was conducted to develope an automatic liquid feeder for early weaning piglets and to test the efficacy of the system. The liquid feeder consists of water heating and discharge unit, dry diet storing and discharge unit, mixing and discharge unit, mixed liquid feed-delivering unit, and the central control part which control each unit, feeding frequency and the amount of feeding. For investigating the possibility of practical use, a feeding trial was carried out using eighteen three way crossbred piglets weaned on 19 days of age for the experimental period of six weeks. Experimental diet was provided in liquid form using the automatic liquid feeder for the first three weeks and in dry form for the later three weeks. The water heating and discharge unit exactly supplied warm water by 27 $m\ell$/s, into the mixing unit. The dry diet storing and discharge unit supplied dry feed by 3.7g/s, into the mixing unit. Being compared with the standard growth rate suggested by NRC, average daily gain of the piglets during the first three weeks of liquid feeding was lower by 10%, while it was higher during three weeks of dry feeding and over the whole experimental period by 24 and 17%, respectively. Feed/gain was 1.09, 2.14 and 1.89 for the first 3 weeks, later 3 weeks, and whole period, respectively. Diarrhea was observed for three days from day 3 to day 7 after feeding liquid diet, but no pig died of it. In conclusion, a preliminary test for the newly developed an automatic liquid feeder using 19 days of age weaning piglets showed that the unit was successfully operated without any major problems. Piglets raised on a liquid diet through the unit developed grew less during the first three weeks, but their growth and feed intake were greatly improved thereafter, indicating the developed automatic liquid feeder may be practically used in swine industry.

  • PDF

Determination of Polycyclic Aromatic Hydrocarbons in Smoked Food Products (훈연식품 중 polycyclic aromatic hydrocarbons 함량 분석)

  • Seo, Ilwon;Nam, Hejung;Lee, Songyoung;Lee, Kyueun;Shin, Han-Seung
    • Food Engineering Progress
    • /
    • v.13 no.3
    • /
    • pp.195-202
    • /
    • 2009
  • This study was accomplished that analysis of seven polycyclic aromatic hydrocarbons (PAHs) in smoked or nonsmoked processing foods by high performance liquid chromatography (HPLC) with fluorescence detection. The calibration line was constructed with injected different levels of standard concentration. Limit of detection (LOD) and limit of quantification(LOQ) showed higher linearity ($r^{2}$=0.998) reasonably, and recovery exhibited 0.033-0.666 $\mu$g/kg, 0.108-2.217 $\mu$g/kg and 69.31-90.14%, respectively. As a result, the samples using smoked tuna as smoked materials contained seven PAHs with different range from 0.256 to 0.486 $\mu$g/kg. The benzo[a]pyrene, indicator of PAHs, was detected to below the LOQ in two samples. Concentrations of benzo[a]pyrene in three samples were below the 2 $\mu$g/kg which is the limit of regulation. Smoked tuna sauces were detected from 0.321 to 0.552 $\mu$g/kg and not detected in drying powders. PAHs of smoked meat products were ranged from 0.720 to 2.027 $\mu$g/kg and are higher than concentration of tuna smoked samples. PAHs were very low in non-smoked foods including mustard, herb, and roasted meats.

A New Early Maturity, Good Quality and Cold Tolerance Rice Cultivar, "Unmi" (벼 조생 양질 내냉성 "운미")

  • Nam, Jeong Kwon;Kim, Ki Young;Ko, Jong Cheol;Ha, Ki Yong;Choung, Jin Il;Kim, Bo Kyeong;Baek, Man Kee;Shin, Mun Sik;Kim, Yeong Doo;Kang, Hyeon Jung;Noh, Gwang Il;Kim, Woo Jae;Park, Hyun Su;Baek, So Hyeon;Shin, Woon Chul;Kim, Kyeong Hoon;Ko, Jae Kwon;Shin, Seo Ho;Kim, Chung Kon
    • Korean Journal of Breeding Science
    • /
    • v.40 no.3
    • /
    • pp.352-355
    • /
    • 2008
  • "Unmi" is a new japonica rice variety developed by the rice breeding team of Honam Agricultural Research Institute, NICS, RDA in 2007. This variety was developed from a across between Samcheonbyeo with lodging and cold tolerance and HR17870 derived from the cross of Iksan435 (Sobibyeo) and Sangju17 with resistance to diseases and good quality. This variety has about 110 days of growth duration from transplanting to harvesting in northern plain, northern and southern mid-mountainous areas of South Korea. It is about 68 cm in culm length and tolerant to lodging. In reaction to biotic and abiotic stresses, it shows moderate resistance to blast, and to bacterial blight pathogen races from $K_1$ to $K_3$, but susceptible to other major diseases and insect pests. The milled rice of "Unmi" is translucent and has relatively clear non-glutinous endosperm and medium short grain. It has about 17.3% amylose content and 6.3% of protein and similar palatability of cooked rice compared with Odaebyeo. The milled rice yield performance of this variety is about 5.16 MT/ha under the standard fertilizer level of the ordinary transplanting cultivation. "Unmi" would be adaptable for ordinary transplanting in the northern plain, northern and southern mid-mountainous area of South Korea.

Effect of Green Tea and Saw Dust Contents on Static Bending Strength Performance of Hybrid Boards Composed of Wood Fiber, Saw Dust and Green Tea (목재섬유, 톱밥 및 녹차 이종복합보드의 정적 휨 강도성능에 미치는 녹차 및 톱밥 배합비율의 영향)

  • Park, Han-Min;Lee, Soo-Kyeong;Seok, Ji-Hoon;Choi, Nam-Kyung;Kwon, Chang-Bae;Heo, Hwang-Sun;Kim, Jong-Chul
    • Journal of agriculture & life science
    • /
    • v.45 no.6
    • /
    • pp.41-46
    • /
    • 2011
  • In this study, in addition to the green tea-wood fiber hybrid composite boards of previous researches, to make effective use of saw dust of domestic cypress tree with functionalities and application as interior materials, eco-friendly hybrid composite boards were manufactured from wood fiber, green tea and saw dust of cypress tree. We investigated the effect of the component ratio of saw dust and green tea on static bending strength performances. Static bending MOE (modulus of elasticity) was within 0.956~1.18GPa, and showed the highest value in wood fiber : green tea : saw dust = 50 : 40 : 10 of the component ratio, and had the lowest value in 50 : 30 : 20 of component ratio. These values were 2.0~3.1times lower than those of green tea-wood fiber hybrid composite boards reported in the previous researches. The bending MOR (modulus of rupture) showed 8.99~11.5MPa, the change of the bending MOR with component ratio of the factors was the same as that of bending MOE. These values had 1.9~3.5 times lower value than those of green tea-wood fiber hybrid composite boards, and showed the slightly lower values than the MOR of particle boards (PB) and medium density fiberboards (MDF) prescribed in Korean Industrial Standard. Therefore, it is considered that these hybrid composite boards need to improve strength performances by component ratio change, hybrid composite with other materials and adhesive change etc. in order to industrialize the hybrid composite boards.

A Proposal on the Improvement of Obstacle Limitation Surface and Aeronautical Study Method (장애물 제한표면과 항공학적 검토방법의 제도 개선에 관한 제언)

  • Kim, Hui-Yang;Jeon, Jong-Jin;Yu, Gwang-Eui
    • The Korean Journal of Air & Space Law and Policy
    • /
    • v.34 no.1
    • /
    • pp.159-201
    • /
    • 2019
  • Along with Annex 14 Volume I establishment in 1951 and the set-up of restriction surface around the runway, aeronautical technique and navigation performance achieved dazzling growth, and the safety and precision of navigation greatly improved. However, restrictions on surrounding obstacles are still valid for safe operation of an aircraft. Standards and criteria for securing safety of aircraft operating around and on airport is stated in Annex 11 Air Traffic Services and Annex 14 Aerodrome etc. In particular, Annex 14 Volume I presents the criteria for limiting obstacles around an airport, such as natural obstacles such as trees, mountains and hills to prevent collisions between aircraft and ground obstacles, and artificial obstacles such as buildings and structures. On the other hand, Annex 14 Volume I, in the application of the obstacles limitation surfaces, apply the exception criteria, as it may not be possible to remove obstacles that violate the criteria if the aeronautical study determines that they do not impair the safety and regularity of aircraft operation. Aeronautical study has been applied and implemented in various countries including United States, Canada and Europe etc. accordingly, Korea established and amended some provisions of the Enforcement rules of the Aviation Act and established the Aeronautical study guidelines to approve exceptions. However, because ICAO does not provide specific guidelines on procedures and methods of Aeronautical study, countries conducting aeronautical study have established and applied their own procedures and methods. Reflecting this realistic situation, at the 12th World Navigation Conference and at the 38th General Assembly, the contracting States demanded a reexamination of the criteria for current obstacle limitation surfaces and methods of aeronautical study, and the ICAO dedicated a team of experts to prepare new standard. This study, in line with the movement of international change in obstacle limitation surface and aeronautical study, aims to compare and analyze current domestic and external standards on obstacle limitation and height limits, while looking at methods, procedure and systems for aeronautical study. In addition, expecting that aeronautical study will be used realistically and universally in assessing the impact of obstacles, we would recommend the institutional improvement of the aeronautical study along with the development of quantitative analysis methods using the navigation data in the current aeronautical study.

Monitoring of Benzoic, Sorbic and Propionic Acid in Cereal Grains, Nuts and Seeds (곡류 및 견과 종실류 중 안식향산, 소브산, 프로피온산의 함유량 조사)

  • Yun, Sang Soon;Lee, Sang Jin;Lim, Do Yeon;Lim, Ho Soo;Lee, Gunyoung;Kim, MeeKyung
    • Journal of Food Hygiene and Safety
    • /
    • v.34 no.1
    • /
    • pp.65-72
    • /
    • 2019
  • This study was aimed at investigating the levels of the natural preservatives of benzoic, sorbic and propionic acids in cereal grains, nuts and seeds. Benzoic and sorbic acid were analyzed by high-performance liquid chromatography with a diode-array detector (HPLC-DAD) and further confirmed by liquid chromatography-tandem mass spectrometry (LC-MS/MS), whereas propionic acid was analyzed using a gas chromatography-flame ionization detector (GC-FID) and further confirmed by gas chromatography-mass spectrometry (GC-MS). Benzoic, sorbic and propionic acids were found in 44, 22, and 550 samples out of 702 samples, respectively. From the total of 702 samples. The concentrations of benzoic, sorbic and propionic acid were ranged from not detected (ND) to 23.74 mg/L, from ND to 7.90 mg/L, and from ND to 37.39 mg/L in cereal grains, nuts and seeds, respectively. The concentration ranges determined in this study could be used as standard criteria in the process of inspecting cereal grains, nuts and seeds for preservatives as well as to address consumer complaints or trade disputes.

Experiments on Flow Characteristics of Asphalt Seal Composite Waterproofing Method for Underground Concrete Structure Exterior Wall Waterproofing (지하 콘크리트 구조물 외벽 방수용 아스팔트 씰재 복합방수 공법의 흘러내림 특성에 관한 실험)

  • Ko, Sang-Ung;Kim, Kyoung-Hoon;Kim, Young-Sam;Shin, Hong-Chul;Kim, Jin-Man
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.6 no.4
    • /
    • pp.297-303
    • /
    • 2018
  • With the changing trend of the building construction to high rising and large scaling, the underground structure has been increased, and its usage also increased and variety. Hence, to protect the underground structure against underground water, various water proofing methods has been developed. Among the many water proofing methods, the combined water proofing method using both asphalt seal and sheet has been widely used to secure the sufficient performance and decrease the construction failure. However, during the summer period of extremely high temperature conditions, the asphalt sealing materials were separated and leaked into the structure. Therefore, the aim of the research is to provide the quality standard of asphalt sealing material based on the various temperature changes depending on seasons. According to the experimental results, the temperature of the sealing materials applied on the slab was increased up to $54^{\circ}C$ which was $3^{\circ}C$ higher than the structure temperature of $51^{\circ}C$. Based on the melting test for asphalt sealing materials applied on the outside wall of the structure, in the case of water-dispersing typed materials showed significant melting down due to its slow evaporation and low viscosity. Furthermore, from the accelerated test conducted indoor conditions, a solvent-type and water-dispersing typed materials showed significant melting down due to their low viscosity and melting point in ambient conditions. Based on these results, viscosity and melting point are found as the important factors on asphalt sealing materials' quality, and it is necessary to designate the quantitative level of the viscosity and melting point for quality control.

Validation of Korean Diagnostic Scale of Multiple Intelligence (한국형 다중지능 진단도구의 타당화)

  • Moon, Yong-Lin;Yu, Gyeong-Jae
    • (The) Korean Journal of Educational Psychology
    • /
    • v.23 no.3
    • /
    • pp.645-663
    • /
    • 2009
  • The purpose of this study is to develop and verify a Korean Diagnostic Scale of Multiple Intelligence(MI), which will be an alternative test to avoid problems with former Shearer's MI test and to adopt H. Gardner's suggestions to develop MI assessment. The test is developed 5 types; kindergartner, elementary lower grader, elementary upper grader, middle schooler, high schooler test. A form of test is diversified with 3 types; multiple-choice items for accomplishment, true or false items for ability, and self-reported items with likert scale for interest and ability. According to H. Gardner's suggestions, we have tried to reanalyze key component of MI, analyze an overlapping or hierarchical relationship between intelligences, develop intelligences-fair items, diversify form of item. We have developed a final standardized test through a primary, secondary preliminary-test analysis, and sampled 5,585 students by age, gender, and regional groups. As a result of this sampling test, we can get a norm score and compare individuals with other's score relatively. To verify this test, we analyzed behavior observation, mean, standard deviation, a percentage of correct answers, reliability of each test type, correlation between intelligence scales, Kruskal-Wallis test of mean rank of career choice by intelligences. As a result of correlation analysis between sub-intelligence scales, we can conclude that this MI test is satisfied with intelligence independent assumption. Besides, as non-parametric statistics test(Kruskal-Wallis) of career choice by intelligences, we can identify that MI is related with domain of career choice. This test is not a linguistic and logical-mathematical biased test but a intelligences-fair test. It makes us compare individual's potential with a norm score. Besides, it could be useful as a means of educational prescription or counsel in comparison with ability, interest, and accomplishment of individual. But this test is limited to do factor or correlation analysis between types of sub-test, because items are minimized for a time-constraint and a heavy burden of test receiver. But if it could be tested with increased items by two sessions, further research could be expected to get over this constraints and do a further validation analysis.