• 제목/요약/키워드: Performance Quantity

검색결과 1,000건 처리시간 0.029초

스타트업의 스케일업 창업생태계 구성요소의 IPA 분석 (IPA Analysis of the Components of the Scale-up Entrepreneurial Ecosystem of Startups)

  • 윤혜미;남정민
    • 벤처창업연구
    • /
    • 제17권6호
    • /
    • pp.25-37
    • /
    • 2022
  • 본 연구는 우리나라 국가 수준에서 스케일업 창업생태계의 구성요소에 대한 중요도와 만족도(현재 수준)를 창업 후 7년 이내의 스타트업 창업자들을 대상으로 설문을 실시하고 구성요소별 스케일업 정책 방향을 IPA(importance-performance analysis) 분석을 활용하여 분석하는 데 목적이 있다. 창업생태계의 주체자인 창업자들의 인식은 창업의 양과 질에 영향을 주기 때문에 스케일업 구성요소에 대한 인식을 분석 하고 진단해 보는 연구가 필요하다. 국가 경제와 창업생태계의 발전을 위해서는 스타트업에서 스케일업, 유니콘으로 부상하는 기업들이 배출되어야 하고 이를 위해서는 스케일업 창업생태계를 위한 요소들이 필요하다. 본 연구의 주요 연구 결과는 다음과 같다. 첫째, 창업자들이 인식하는 스케일업 창업생태계 구성요소의 중요도 순위는 '성장단계별 자금 지원', '기업 맞춤형 스케일업 지원', '규제 개선', '스케일업 전용 펀드', '투자 대형화', '기술 인재 육성'순으로 나타났다. 둘째, 중요도-만족도 매트릭스에서 향후 집중적으로 개선해야 하는 요인은 '범정부 통합 추진 계획', '스케일업 전문 조직 운영', '기업 맞춤형 스케일업 지원', '규제 개선', '한국 스케일업 모델 구축'으로 나타났다. 이에 따라, 스케일업 창업생태계를 위해 다양하고 대형화된 금융자본, 사업 분야별 스케일업 프로그램의 다양화, 스타트업과 스케일업 지원의 연계, 신기술 및 신산업 분야의 규제 완화, 기업 맞춤형의 스케일업 성장 역량 강화, 해외 네트워킹 기회 제공 등을 시사점으로 도출할 수 있다. 또한 국내 스케일업 창업생태계 구성요소를 도출하고 이에 대한 인식을 진단한 연구로 정책 실무와 학술적으로 기여할 것으로 본다.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하;최재갑
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.17-48
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

  • PDF

전자파표면유속계의 측정 각도에 따른 평수기 유속 측정 정확도 분석 (Accuracy evaluation of microwave water surface current meter for measurement angles in middle flow condition)

  • 손근수;김동수;김경동;김종민
    • 한국수자원학회논문집
    • /
    • 제53권1호
    • /
    • pp.15-27
    • /
    • 2020
  • 하천 유량관측은 수자원의 관리를 위해 활용되는 기초적이고 대표적인 자료로 하천에서 정확한 유량을 관측하는 것은 중요하다. 따라서 최근에는 다양한 첨단 장비들이 개발되어 전통적인 하천의 유량관측을 대체하거나 보완하고 있다. 여러 최신 장비들 중 전자파표면유속계는 홍수기와 같이 하천에 접근하여 직접유량계측이 위험하고 정확도 확보가 어려울 경우전자파를 이용하여 비접촉식으로 유량을 계측하는 장비로 홍수기 및 평갈수기에도 하천 유량계측에 활용되기 시작하였다. 전자파표면유속계는 사용법이 간단하고 간접적으로 유속을 측정하기 때문에 기존의 직접측정 방법에 비해 안전한 장점이 있어 현재 국내에서는 홍수기 또는 접근이 어려운 하천의 유속 측정을 위해 사용되고 있다. 국내에서는 1993년 유량측정 장치 개발을 위해 전자파표면유속계(MWSCM; Microwave Water Surface Current Meter)를 개발을 연구를 수행하였고, 최근에는 국내에서 개발된 전자파표면유속계을 활용하여 유량측정을 위해 사용되고 있다. 하지만 국내에서 개발된 전자파표면유속계가 실제 하천에서 유속측정의 정확도에 대한 연구는 부족한 실정이다. 전자파표면유속계는 기기로부터 전자파를 이용해 유속을 측정하기 때문에 수직각과 편각과 같은 각도 변화에 따라 측정정확도가 바뀔 수 있고, 전자파표면유속계 본체에서 발사되는 전자파의 측정영역에 따라 유속측정에 오차가 발생할 수 있다. 본 연구에서는 국내에서 개발 전자파표면유속계의 측정정확도를 분석하기 위해서 실제하천과 유사한 실규모 하천수로에서 수직각과 편각을 변화시키며 측정을 수행하여 수직각과 편각에 변화에 따른 유속측정 정확도를 분석하였다. 그리고 전자파표면유속계의 측정영역의 고려를 통해서 측정영역에 따른 유속측정결과를 분석하였다. 유속측정 결과를 통해서 수직각 15° 이하에서는 유속측정의 오차가 커지게 되는 것으로 나타났고, 편각이 커질수록 유속측정의 결과의 변동계수가 커지는 것으로 나타났다. 그리고 편각에 따른 오차의 영향은 전자파표면유속계의 측정영역에 따라 결과가 달라지는 것으로 나타났다.

NIRS AS AN ESSENTIAL TOOL IN FOOD SAFETY PROGRAMS: FEED INGREDIENTS PREDICTION H COMMERCIAL COMPOUND FEEDING STUFFS

  • Varo, Ana-Garrido;MariaDoloresPerezMarin;Cabrera, Augusto-Gomez;JoseEmilioGuerrero Ginel;FelixdePaz;NatividadDelgado
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1153-1153
    • /
    • 2001
  • Directive 79/373/EEC on the marketing of compound feeding stuffs, provided far a flexible declaration arrangement confined to the indication of the feed materials without stating their quantity and the possibility was retained to declare categories of feed materials instead of declaring the feed materials themselves. However, the BSE (Bovine Spongiform Encephalopathy) and the dioxin crisis have demonstrated the inadequacy of the current provisions and the need of detailed qualitative and quantitative information. On 10 January 2000 the Commission submitted to the Council a proposal for a Directive related to the marketing of compound feeding stuffs and the Council adopted a Common Position (EC N$^{\circ}$/2001) published at the Official Journal of the European Communities of 2. 2. 2001. According to the EC (EC N$^{\circ}$ 6/2001) the feeds material contained in compound feeding stufs intended for animals other than pets must be declared according to their percentage by weight, by descending order of weight and within the following brackets (I :< 30%; II :> 15 to 30%; III :> 5 to 15%; IV : 2% to 5%; V: < 2%). For practical reasons, it shall be allowed that the declarations of feed materials included in the compound feeding stuffs are provided on an ad hoc label or accompanying document. However, documents alone will not be sufficient to restore public confidence on the animal feed industry. The objective of the present work is to obtain calibration equations fur the instanteneous and simultaneous prediction of the chemical composition and the percentage of ingredients of unground compound feeding stuffs. A total of 287 samples of unground compound feeds marketed in Spain were scanned in a FOSS-NIR Systems 6500 monochromator using a rectangular cup with a quartz window (16 $\times$ 3.5 cm). Calibration equations were obtained for the prediction of moisture ($R^2$= 0.84, SECV = 0.54), crude protein ($R^2$= 0.96, SECV = 0.75), fat ($R^2$= 0.86, SECV = 0.54), crude fiber ($R^2$= 0.97, SECV = 0.63) and ashes ($R^2$= 0.86, SECV = 0.83). The sane set of spectroscopic data was used to predict the ingredient composition of the compound feeds. The preliminary results show that NIRS has an excellent ability ($r^2$$\geq$ 0, 9; RPD $\geq$ 3) for the prediction of the percentage of inclusion of alfalfa, sunflower meal, gluten meal, sugar beet pulp, palm meal, poultry meal, total meat meal (meat and bone meal and poultry meal) and whey. Other equations with a good predictive performance ($R^2$$\geq$0, 7; 2$\leq$RPD$\leq$3) were the obtained for the prediction of soya bean meal, corn, molasses, animal fat and lupin meal. The equations obtained for the prediction of other constituents (barley, bran, rice, manioc, meat and bone meal, fish meal, calcium carbonate, ammonium clorure and salt have an accuracy enough to fulfill the requirements layed down by the Common Position (EC Nº 6/2001). NIRS technology should be considered as an essential tool in food Safety Programs.

  • PDF

식재료 아웃소싱이 경제적 주방에 미치는 영향에 관한 연구 - 특1급호텔 양식조리를 중심으로 - (Study on economic effects of outsourcing of food materials on the hotel kitchen - Focus on cooking Western food in the first class hotel -)

  • 성태종
    • 한국관광식음료학회지:관광식음료경영연구
    • /
    • 제13권2호
    • /
    • pp.45-69
    • /
    • 2002
  • This study is designed to examine feasibility and limitation of outsourcing in cooking Western food in a hotel, to interpret importance of outsourcing(eg. outside order, outside procurement, outside supply) in a broad sense in order to reinforce the core capacity in the cooking department, and to know whether the cooking human power is efficiently used and how much the chefs recognize outsourcing of food materials. As many companies conduct restructuring to cut down its size, the reduction of human power led the Western food cooking in the hotel to lower core capacities, lower quality, and lower efficiency. In addition, the sagging morale of chefs undermined creativity. To change from the traditional kitchen to an economic kitchen needs to look into importance of outsourcing, cognitive attitude of chefs, relation with outside suppliers. Here suggests performance of positive changes in the structure The study examined feasibility and limitation of outsourcing in the hotel kitchen as well as chefs' cognitive attitude toward outsourcing of food materials to reinforce core capabilities of the hotel kitchen. 1. Companies of outsourcing are selected according to variability of price conditions, flexibility of contract conditions, popularity of the outsourcing company, and reputation of the outsourcing company. 2. The importance of outsourcing in the Western food cooking is divided into 4 factors such as standard of selecting outsourcing companies, policies of cooking manu, quality of cooking, and quantity of cooking. 3. The most feasible section in outsourcing of food materials is a process of kneading flour for bread, which shows that many Western-food chefs expect to put higher possibility of outsourcing on the kneading. In other words, when it comes to confectionery and bakery, there are many outside expert processing companies supplying high quality products. In the order of outsourcing feasibility, sauce is followed by processed vegetable, garnish of main dish, and soup. The least feasible section in outsourcing of food materials is appetize. Appetize includes a concept of a improvised dish and needs speed. Due to its color, freshness, and sensibility of taste, the appetize plays a key role in the Western food cooking. 4. When outsourcing is taken in place, the highest risk is to lower the inner cooking skills. Therefore chefs in charge of the Western food sequently recognize both internal problems including storage of cooking skills, unstability of layoffs, and loss of cooperation between departments, and external problems including inferior goods, difficulty of differentiating manu, delay of delivery, and expiration date. It shows that most of the Western food chefs consider risks of the internal problems at first. 5. A effective outsourcing needs appropriate selection of outsourcing companies, maintenance of credibility, active communication, check and management of hygiene. However regardless of their position or career, chefs in charge of the Western food have the same cognitive attitude toward selecting successful outsourcing companies after the outsourcing system is enforced. The core of cooking, or a final stage in the full process of so-called artistic cooking, should be treated with insourcing. Reduction of several cooking processes resulted in shortened cooking time, increased efficiency, faster cooking, cutting the waiting-lines, and finally more room for customers. The outsourcing system can reduce or eliminate the following processes in cooking: buying various food materials, checking, storing, preparing, and processing. Especially in the Western food cooking department of a hotel, the outsourcing system should be enforced to make an economic kitchen and to efficiently manage it. Wow it's time to change from the traditional kitchen to an economic kitchen in the hotel cooking department. For that, the cooking department should become a small but strong organization by outsourcing except its core work.

  • PDF

맥주박 발효사료 및 대두의 급여가 한우 거세우의 육성성적 및 도체등급에 미치는 영향 (Effects of Fermented Feedstuff with Wet Brewer’s Grain and Soybean on Fattening Performance and Carcass Grade in hanwoo Steers)

  • 박병기;길준민;김종복;홍병주;라창식;신종서
    • Journal of Animal Science and Technology
    • /
    • 제45권3호
    • /
    • pp.397-408
    • /
    • 2003
  • 본 연구는 한우 거세 비육우에 맥주박을 이용하여 개발한 발효사료 및 분쇄대두의 급여가 육성성적, 혈액성상 및 도체등급에 미치는 효과를 검토하고자 실시하였다. 공시축은 한우 사육농가에서 평균 체중 455$\pm$25.9㎏의 한우 거세 비육우 20두를 공시하여 실시하였다. 시험구 처리는 모든 처리구에 배합사료와 볏짚을 기본사료로 급여하였으며, 배합사료를 전량 급여하는 대조구(Control), T1(배합사료:맥주박 발효사료=60:40), T2(배합사료:분쇄대두=80:20), T3 (배합사료:맥주박 발효사료:분쇄대두=50:40:10) 및 T4(배합사료:맥주박 발효사료:분쇄대두=40: 40:20)로 구분하였으며, 본 연구의 결과를 요약하면 다음과 같다. 일당증체량은 비록 통계적인 유의성은 인정되지 않았지만 대조구에 비해 처리구들에서 다소 증가하는 경향을 보였다. 사료효율의 경우 대조구, T1, T2, T3 및 T4에서 각각 11.90, 8.25, 9.44, 6.69 및 7.71로 나타나 T2를 제외한 처리구들에서 대조구에 비해 사료효율이 유의적으로 개선되는 결과를 보였다(P<0.05). 혈중 BUN 농도는 대조구에 비해 T4에서 유의적으로 높은 것으로 나타났으나(P<0.05), 반면에 혈중 creatinine 농도의 경우에는 대조구에 비해 T4에서 유의적으로 낮은 결과를 보였다(P< 0.05). 대조구, T1, T2, T3 및 T4의 혈중 glucose 농도는 각각 51.00, 59.39, 62.44, 62.17 및 54.00mg/$d\ell$로 나타나 대조구에 비해 처리구들에서 대체적으로 높은 결과를 보였다. 등지방두께의 경우 T3에서 대조구 및 다른 처리구들에 비해 다소 두꺼워지는 것으로 나타났다. 배최장근단면적의 경우 T1, T3 및 T4에서 대조구에 비해 개선되는 것으로 나타났다. 대조구, T1, T2 및 T4의 A등급 출현율은 각각 66, 33, 75 및 33%로 나타났다. 결과적으로 맥주박 발효사료를 단독 급여하게 되면 사료단가는 낮추면서도 비육우의 증체율 및 도체등급에는 영향을 미치지 않게 되는 장점이 있을 뿐만 아니라 분쇄대두와 맥주박 발효사료를 혼합 급여하게 되면 증체율 및 사료효율을 증가시킬 수 있는 효과가 있기 때문에 맥주박 발효사료와 적정 비율의 분쇄대두(농후사료 급여량의 10%)는 거세우를 위한 비육사료로서 효과적으로 이용될 수 있는 것으로 판단된다. 또한 맥주박 발효사료 제조과정에서 사료에 대한 발효처리는 맥주박 발효사료의 저장성을 크게 높여주기 때문에 맥주박과 같이 고수분부산물을 가축의 사료자원으로 활용하는데 있어서 의미하는 바가 큰 것으로 판단된다.

산지복잡지형과 생태적 비균질성: 산지경관의 생산성과 수자원/수질에 관한 생태계 서비스 평가 (Complex Terrain and Ecological Heterogeneity (TERRECO): Evaluating Ecosystem Services in Production Versus water Quantity/quality in Mountainous Landscapes)

  • 강신규
    • 한국농림기상학회지
    • /
    • 제12권4호
    • /
    • pp.307-316
    • /
    • 2010
  • 산지복잡지형은 지구표면의 약 20%를 차지하며, 절반 정도의 인류에게 맑은 물을 제공하는 지역이고, 대부분의 주요하천의 발원지로서 국가 혹은 지역 간 사회-경제적 경쟁과 정치적 논란의 대상지역이기도 하다. 산지경관생태계는 우리에게 폭넓은 생태계 생산물과 서비스(맑은 물, 에너지, 식량 및 산림자원 등)를 제공하며, 관광과 휴식활동의 대상으로 크게 부각되고 있다. 이들 지역은 특히 매우 높은 생물다양성과 육상탄소의 주요 저장원이기도 하다. TERRECO사업은 산지복잡지형의 생태계 과정에 대한 이해를 증진하고, 생태계 서비스와 관련한 생태계 기능들을 공간적으로 평가하는 데에 중점을 둔다. 특히 정교한 평가체계를 개발함으로써 산지복잡지형에서의 기후와 토지이용변화에 따른 생태계 서비스 기능의 변화를 정량화할 것이다. 이러한 구도에서 산지복잡지형의 수문학, 수자원, 생산성, 생물다양성, 토양생지화학, 미량가스방출 및 수질 등을 복합적으로 규명하고 있다. TERRECO사업은 총 34개의 세부연구과제로 구성되었으며, 한국산지복잡지형에서의 공동연구를 통해 연구기법의 개발 및 적용을 수행 중에 있다. 세부연구과제들은 산지복잡지형의 경관비균질성에 따른 (1) 물순환과 수자원, (2) 용존유기탄소(DOC), 미세입자상 유기탄소(fPOC), 질소화합물(TN)과 인 함유 물질(TP)의 수송과 수질에 영향을 미치는 탄소와 질소 저장원, (3) 환경적 관심이 높은 미량가스($CO_2$, $N_2O$, $CH_4$)의 포집과 방출, (4) 경관의 생물다양성과 생물다양성에 기인한 생태계 서비스들, 그리고 마지막으로 (5) 농업과 산림 생산성의 차이를 조사하도록 고안하였다. 따라서 TERRECO사업은 한국 산지복잡지형의 생태계 서비스를 조절하는 원리들을 규명하고, 총 34개 세부연구과제의 결과들이 생태계 서비스의 정량적 평가체계를 수립하는 데에 기여하도록 조직화함으로써 새로운 수준의 학제간 정보교환프로그램을 개발하는 데에 기여할 것으로 기대된다.

Tier분석을 통한 벤치마킹항만 적출방법 (An Extraction Way of Benchmarking Ports through Tier Analysis for Korean Seaports)

  • 박노경
    • 한국항만경제학회지
    • /
    • 제25권1호
    • /
    • pp.15-28
    • /
    • 2009
  • 본 논문에서는 국내 20개 항만의 2개의 산출물(수출입물량, 선박입출항척수)과 2개의 투입물(접안능력, 하역능력)을 이용하여 전통적인 CCR분석을 통해서 상대적인 효율성을 측정하였으며, 기존 연구의 한계를 확장시키기 위해서 국내 항만분야에서는 처음으로 Tier분석을 통해서 비효율적인 항만들이 단기, 중기, 장기적으로 벤치마킹할 수 있는 항만들을 적출하는 방법을 보여 주었다. 주요한 실증분석 결과는 다음과 같다. 첫째, 전통적인 CCR분석에서는 완도, 여수, 울산, 삼척항 들이 효율적인 벤치마킹항만들로 나타났다. 둘째, Post-DEA를 활용한 비효율적 항만들의 Tier 1단계의 분석을 실시한 결과, 3개의 항만(평택, 서귀포, 부산)이 효율적인 벤치마킹항만으로 전환하였으며, Tier 2단계에서는 5개의 항만(인천, 목포, 제주, 삼천포, 묵호), Tier 3단계에서는 3개의 항만(잠항, 군산, 광양)이 효율적인 벤치마킹항만으로 전환되었다. 따라서 최종적으로 20개 중에서 5개항만(25%)이 비효율적으로 운영되고 있는 사실을 확인하였다. 셋째, 비효율적인 항만들(마산, 진해, 포항, 동해, 속초)은 해당항만들의 벤치마킹 대상을 찾아냄으로써 경로군집을 발견하였다. 넷째, 최종적으로 비효율적인 항만들의 Tier별 벤치마킹항만을 살펴보면, 마산항(장항$\rightarrow$제주$\rightarrow$서귀포$\rightarrow$여수), 진해항(장항$\rightarrow$목포$\rightarrow$서귀포$\rightarrow$완도), 포항항 & 동해항(장항$\rightarrow$삼천포$\rightarrow$평택$\rightarrow$삼척), 속초항(장항$\rightarrow$목포$\rightarrow$서귀포$\rightarrow$완도)로 나타났다. 본 연구의 정책적인 함의는 다음과 같다. 즉, 항만정책을 입안하거나, 해당 항만의 경영관리자는 만일에 본 연구의 방법을 이용한 Tier분석에서 비효율적인 항만들에 대해서는, 단계적으로 벤치마킹 항만이 결정되면, 그러한 항만들의 상봉을 단계별로 면밀하게 검토하여 해당항만의 항만환경, 관리체계, 재무수입, 공공성 둥을 개선시키기 위한 제도적인 정책을 입안하고 시행토록 해야만 한다는 점이다. 본 논문의 한계점은 SOM (Self-Organizing Map)기법을 이용한 클러스터링분석(투입물의 특성을 반영)을 통해서 항만들끼리의 분류를 통한 벤치마킹분석을 하지 못했다고 하는 점이다.

  • PDF

골재노출 콘크리트포장의 적정 골재 선정에 대한 연구 (A Study on the adequate Aggregate Selection of the Exposed Aggregate PCC Pavements)

  • 김영규;채성욱;이승우;유태석
    • 한국도로학회논문집
    • /
    • 제9권4호
    • /
    • pp.117-127
    • /
    • 2007
  • 골재노출 콘크리트포장은 저소음 포장으로서 유럽, 일본등지에서 성공적으로 사용되어 왔다. 골재노출 콘크리트포장은 콘크리트 표면의 모르타르를 제거하여 표면에 굵은 골재를 노출시키기는 공법이다. 타이어-노면간의 소음을 저감시키는 표면특성도 중요하지만 포장표면이 공용중에 지속적으로 적정한 미끄럼저항을 확보하여야 한다는 점이 간과되어서는 안된다. 반복적인 타이어-노면간 마찰은 표면조직을 마모시켜서 미끄럼저항값을 감소시키게 된다. 골재노출 콘크리트포장의 경우 노면에 굵은 골재가 노출되어 타이어와 접촉되므로 노면에 노출된 굵은 골재의 암종과 형상이 노면마모에 지대한 영향을 미친다. 일반적으로 골재마모특성에 대한 평가시험은 로스앤젤레스시험기에 의한 마모시험과 Accelerated Polishing Machine에 의한 마모시험이 사용되고 있다. 본 연구에서는 다섯 가지 암종의 굵은 골재에 대하여 두 시험법으로 마모를 평가하였다. 실험결과 두 시험법은 실험골재특성뿐만 아니라 마모특성에 따라 상반된 마모저항결과를 도출하였다. 도로노면의 마모는 타이어와 반복된 마찰에 의해 발생하는데 로스앤젤레스에 의한 굵은 골재 마모시험은 굵은 골재의 전체표면과 철구간 충격에 인하여 마모감량이 나타나서 형상에 따라 마모에 대한 저항성을 평가하기 때문에 도로노면의 마모를 파악하기에는 적합하지 않다고 판단된다. 반면에 APM에 의한 굵은 골재 마모시험은 실험법 자체가 노출된 굵은 골재와 타이어의 반복 마찰로 인하여 마모에 대한 저항성을 평가하기 때문에 APM에 의한 굵은 골재 마모시험이 골재노출 콘크리트포장의 노면에 노출된 굵은 골재의 특성에 따른 마모에 대한 저항성을 파악하는데 보다 효과적이라고 사료된다. APM에 의한 마모저항 결과로부터 골재 암종, 비중, 하나 이상의 파쇄면을 가진 골재의 백분률, 편장석 함유율등이 골재의 마모에 중요한 영향을 미친다는 점을 파악할 수 있었다.을 나타냈으며, 그 중 물 추출물에서는 다호조생 품종이 지름 13mm의 저해환을, 알코올 추출물에서는 청목노상 품종이 지름 15mm의 저해환으로 효과가 가장 우수하여 천연 항균제 및 생리활성 물질로의 이용가능성을 추측할 수 있었다.이나 세포핵 및 동양모세혈관등에 병리학적인 변화가 관찰되지 않았으며 간세포대의 배열도 규칙적이었다. 따라서 돼지감자의 이눌린, 연잎분말, 허브의 쐐기풀분말 및 유칼립투스 잎의 분말을 사용한 병합다이어트식이 급여가 비정상적인 지방 축적으로 인한 비만을 효과적으로 예방하고 개선할 수 있는 것으로 나타났다.관리 영역의 평균은 1.7/2.0점(85%)으로 나타났고, 농산물이 가장 낮게 나타났다(p<0.05). 가장 취약한 항목은 '전처리'에서 '세척용수의 온도관리' 항목에서 0.7점이었고, 더욱이 농산물은 0.4점으로 평가되었다. 농산물 업체는 '세절시 이물 혼입방지'와 수산물의 '냉장 냉동식품의 절단시 품온관리'가 문제시되었다. 7. 용수관리 영역의 평균은 2.0/2.0점(100%)으로 가장 높았다. 개인위생관리 영역의 평균은 1.8/2.0점(90%)이며, 모든 항목이 잘 관리되고 있었다. 검사관리 영역은 평균 1.4/2.0점(70%)으로 가장 낮게 평가되었으며, '적정 검사시설 및 기구 구비' 항목은 공산품에서 평균 0.2점으로 평가되어 타품목에 비해 현저히 낮았고(p<0.01), 평가한 93개 항목 중 가장 불량한 상태로 관리되고 있음을 알 수 있었다. '검사용 장비 및 기구의 검교정' 항목은 농산물이 0.4점으로 관리상태의 개선이 필요하며, 품목별로 볼 때 낮은 점수로 평가되었다(p<0.05). 이상의 결과를 종합해볼 때, 원재료의 입고 및 반품관리와 검사관리는 가장 관리가 미비한 영역으로 규명되었다. 구입되는 원재료의 안전성을 위해서는 입고 및 반품 기준이 정확하게 설정되어야 하고, 검사관리를 통해 원재료와 최종제품의 안전성이

  • PDF