• 제목/요약/키워드: Performance Evaluations

검색결과 881건 처리시간 0.026초

A Novel Prototype of Duty Cycle Controlled Soft-Switching Half-Bridge DC-DC Converter with Input DC Rail Active Quasi Resonant Snubbers Assisted by High Frequency Planar Transformer

  • Fathy, Khairy;Morimoto, Keiki;Suh, Ki-Young;Kwon, Soon-Kurl;Nakaoka, Mutsuo
    • Journal of Electrical Engineering and Technology
    • /
    • 제2권1호
    • /
    • pp.89-97
    • /
    • 2007
  • This paper presents a new circuit topology of active edge resonant snubbers assisted half-bridge soft switching PWM inverter type DC-DC high power converter for DC bus feeding power plants. The proposed DC-DC power converter is composed of a typical voltage source-fed half-bridge high frequency PWM inverter with a high frequency planar transformer link in addition to input DC busline side power semiconductor switching devices for PWM control scheme and parallel capacitive lossless snubbers. The operating principle of the new DC-DC converter treated here is described by using switching mode equivalent circuits, together with its unique features. All the active power switches in the half-bridge arms and input DC buslines can achieve ZCS turn-on and ZVS turn-off commutation transitions. The total turn-off switching losses of the power switches can be significantly reduced. As a result, a high switching frequency IGBTs can be actually selected in the frequency range of 60 kHz under the principle of soft switching. The performance evaluations of the experimental setup are illustrated practically. The effectiveness of this new converter topology is proved for such low voltage and large current DC-DC power supplies as DC bus feeding from a practical point of view.

PMIPv6에서 사전 인증 기법과 경로 최적화를 이용한 효율적인 핸드오버 기법에 관한 연구 (A Study on Efficient Handover Scheme using Pre-authentication and Route Optimization in PMIPv6)

  • 김성철;문일영;조성준
    • 한국정보통신학회논문지
    • /
    • 제14권5호
    • /
    • pp.1117-1124
    • /
    • 2010
  • PMIPv6는 IETF의 NetLMM WG에서 표준화를 진행하는 네트워크 기반 이동성 지원 기법으로서, 기존의 단말 기반 이동성 지원 기법의 문제점과 비효율성을 개선하기 위해 제안되었다. IETF에서 공개한 표준 문서는 MN에게 이동성을 제공하기 위한 네트워크 구성 요소와 그 구체적인 동작 및 핸드오버 절차에 대해 서술하고 있다. 그러나 MAG간 핸드오버에 대해서만 정의되어 있고 LMA간 핸드오버에 대해서는 정의되어 있지 않다. 따라서 MN에게 보다 효율적으로 끊김 없는 인터넷 접속을 제공하기 위해서는 LMA간 핸드오버 기법이 함께 사용되어야 한다. 본 논문에서 제안하는 기법은 기존에 제안된 LMA간 핸드오버 기법의 단점인 LMA간 터널을 사용하지 않고, 경로 최적화 절차를 거쳐 효율적인 전송 경로를 사용한다. 또한 핸드오버 지연을 줄이기 위해 사전 인증 기법을 도입하였다. 성능 분석 결과에 따르면 제안하는 기법이 기존의 이동성 지원 기법에 비해 핸드오버 지연을 크게 감소시키는 것을 확인할 수 있었다.

ROI를 이용한 H.264 SVC 에서의 다중 채널 네트워크 비디오 전송 기법 (Multi-channel Adaptive SVC Video Streaming with ROI)

  • 이정환;류은석;유혁
    • 방송공학회논문지
    • /
    • 제13권1호
    • /
    • pp.34-42
    • /
    • 2008
  • 본 논문은 사용자의 주관적/객관적 화질 개선을 위해 ROI(Region Of Interest) 기법과 다중 채널 기법을 H.264 Scalable Extension에 적용하여 제한된 네트워크 대역폭에서 최적의 화질을 얻는 기법을 제안한다. 논문에서 가정하는 네트워크 환경은 모바일 디바이스가 하나 이상의 네트워크 인터페이스를 가지는 차세대 네트워크 컨버전스 환경이다. 따라서, H.264 SVC의 기초 계층 정보와 ROI 정보에 대해 우선 순위를 두어 다중 채널로 전송한다. 실험은 비디오 추출 및 채널 할당에 대한 실험과 ROI 영역에 대한 차별적 전송 실험으로 구성되었으며, 제안하는 기법이 기존 방식에 비해 PSNR 화질 비교에 있어서 더 나은 성능을 보임으로써 제안하는 기법의 우수성을 입증하고 있다.

무선 센서 네트워크에서 적응적인 링크 품질 측정 (Adaptive Link Quality Estimation in Wireless Sensor Networks)

  • 이정욱;원광호;정광수
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제16권5호
    • /
    • pp.556-560
    • /
    • 2010
  • 멀티 홉을 이용하는 무선 센서 네트워크에서는 환경적 요인과 노드의 하드웨어적 제약으로 인해 링크의 품질변화가 불규칙하게 일어난다. 이러한 불규칙성에 대응하여 적절한 경로를 선택하지 못한다면 데이터의 손실이 빈번하게 일어날 수 있다. 기존에는 비컨을 주기적으로 브로드캐스팅하여 링크의 품질을 측정하였지만, 이 기법은 불규칙하게 변화하는 링크의 품질을 효율적으로 측정할 수 없다. 본 논문에서는 네트워크의 상태에 따라 링크의 품질 측정 주기를 적응적으로 측정하는 기법을 제안한다. 링크의 품질이 변화할 때 민첩하게 변화에 대응하여 패킷 손실을 줄이고 변화가 없을 때는 긴 주기로 링크 품질을 측정하여 에너지 소모를 줄이고자 한다. 실험을 통하여 제안된 기법이 기존에 제안된 기법보다 에너지 효율 및 패킷 수신율을 향상시킬 수 있음을 확인하였다.

Multi-Criteria Group Decision Making under Imprecise Preference Judgments: Using Fuzzy Logic with Linguistic Quantifier

  • 최덕현;안병석;김성희
    • 한국지능정보시스템학회:학술대회논문집
    • /
    • 한국지능정보시스템학회 2005년도 공동추계학술대회
    • /
    • pp.557-567
    • /
    • 2005
  • The increasing complexity of the socio-economic environments makes it less and less possible for single decision-maker to consider all relevant aspects of problem. Therefore are, many organizations employ groups in decision making. In this paper, we present a multiperson decision making method using fuzzy logic with linguistic quantifier when each of group members specifies imprecise judgments possibly both on performance evaluations of alternatives with respect to the multiperson criteria and on the criteria. Inexact or vague preferences have appeared in the decision making literatures with a view to relaxing the burdens of preference specifications imposed to the decision-makers and thus taking into account the vagueness of human judgments. Allowing for the types of imprecise judgments in the model, however, makes more difficult a clear selection of alternative(s) that a group wants to make. So, further interactions with the decision-makers may proceed to the extent to compensate for the initial comforts of preference specifications. These interaction may not however guarantee the selection of the best alternative to implement. To circumvent this deadlock situation, we present a procedure for obtaining a satisfying solution by the use of linguistic quantifier guided aggregation which implies fuzzy majority. This is an approach to combine a prescriptive decision method via a mathematical programming and a well-established approximate solution method to aggregate multiple objects.

  • PDF

A review on thermohydraulic and mechanical-physical properties of SiC, FeCrAl and Ti3SiC2 for ATF cladding

  • Qiu, Bowen;Wang, Jun;Deng, Yangbin;Wang, Mingjun;Wu, Yingwei;Qiu, S.Z.
    • Nuclear Engineering and Technology
    • /
    • 제52권1호
    • /
    • pp.1-13
    • /
    • 2020
  • At present, the Department of Energy (DOE) in Unite State are directing the efforts of developing accident tolerant fuel (ATF) technology. As the first barrier of nuclear fuel system, the material selection of fuel rod cladding for ATFs is a basic but very significant issue for the development of this concept. The advanced cladding is attractive for providing much stronger oxidation resistance and better in-pile behavior under sever accident conditions (such as SBO, LOCA) for giving more coping time and, of course, at least an equivalent performance under normal condition. In recent years, many researches on in-plie or out-pile physical properties of some suggested cladding materials have been conducted to solve this material selection problem. Base on published literatures, this paper introduced relevant research backgrounds, objectives, research institutions and their progresses on several main potential claddings include triplex SiC, FeCrAl and MAX phase material Ti3SiC2. The physical properties of these claddings for their application in ATF area are also reviewed in thermohydraulic and mechanical view for better understanding and simulating the behaviors of these new claddings. While most of important data are available from publications, there are still many relevant properties are lacking for the evaluations.

Unsupervised Motion Pattern Mining for Crowded Scenes Analysis

  • Wang, Chongjing;Zhao, Xu;Zou, Yi;Liu, Yuncai
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제6권12호
    • /
    • pp.3315-3337
    • /
    • 2012
  • Crowded scenes analysis is a challenging topic in computer vision field. How to detect diverse motion patterns in crowded scenarios from videos is the critical yet hard part of this problem. In this paper, we propose a novel approach to mining motion patterns by utilizing motion information during both long-term period and short interval simultaneously. To capture long-term motions effectively, we introduce Motion History Image (MHI) representation to access to the global perspective about the crowd motion. The combination of MHI and optical flow, which is used to get instant motion information, gives rise to discriminative spatial-temporal motion features. Benefitting from the robustness and efficiency of the novel motion representation, the following motion pattern mining is implemented in a completely unsupervised way. The motion vectors are clustered hierarchically through automatic hierarchical clustering algorithm building on the basis of graphic model. This method overcomes the instability of optical flow in dealing with time continuity in crowded scenes. The results of clustering reveal the situations of motion pattern distribution in current crowded videos. To validate the performance of the proposed approach, we conduct experimental evaluations on some challenging videos including vehicles and pedestrians. The reliable detection results demonstrate the effectiveness of our approach.

손가락 움직임 인식을 위한 웨어러블 디바이스 설계 및 ML 기법별 성능 분석 (Design and Performance Analysis of ML Techniques for Finger Motion Recognition)

  • 정우순;이형규
    • 한국산업정보학회논문지
    • /
    • 제25권2호
    • /
    • pp.129-136
    • /
    • 2020
  • 손가락 움직임 인식을 통한 제어는 직관적인 인간-컴퓨터 상호작용 방법의 하나이다. 본 연구에서는 여러 가지 ML (Machine learning) 기법을 사용하여 효율적인 손가락 움직임 인식을 위한 웨어러블 디바이스를 구현한다. 움직임 인식을 위한 시계열 데이터 분석에 전통적으로 사용되어 온 HMM (Hidden markov model) 및 DTW (Dynamic time warping) 기법뿐만 아니라 NN (Neural network) 기법을 적용하여 손가락 움직임 인식의 효율성 및 정확성을 비교하고 분석한다. 제안된 시스템의 경우, 경량화된 ML 모델을 설계하기 위해 각 ML 기법에 대해 최적화된 전처리 프로세스를 적용한다. 실험 결과, 최적화된 NN, HMM 및 DTW 기반 손가락 움직임 인식시스템은 각각 99.1%, 96.6%, 95.9%의 정확도를 제공한다.

감성분석을 활용한 사물인터넷(IoT) 서비스 리뷰 분석: 사업자 특성에 따른 차이를 중심으로 (An Analysis of IoT Service using Sentiment Analysis on Online Reviews: Focusing on the Characteristics of Service Providers)

  • 류민호;조호수
    • 한국산업정보학회논문지
    • /
    • 제25권5호
    • /
    • pp.91-102
    • /
    • 2020
  • 사물인터넷(Internet of Things: IoT)은 다양한 사업자들이 같은 시장을 두고 경쟁하는 분야로, 서비스를 제공하는 사업자들의 주 사업영역 및 특성에 따라 제품의 기능과 성능 등의 차이가 존재한다. 본 논문은 감성분석을 통해 사업자의 특성에 따라 해당 사업자가 제공하는 서비스에 대한 만족도가 달라지는지를 평가한다. 이를 위해, 구글 플레이스토어에 등록된 국내외 사물인터넷 관련 서비스 중 스마트홈, AI스피커, 스마트카 3가지 영역의 총 41개의 애플리케이션에 대한 34,310건의 리뷰를 수집하고 단어 중요도 분석과 감성분석을 실시하였다. 리뷰분석은 키워드 중요도별, 서비스별, 사업자의 기존 사업영역별, 국내외 사업자별 등 다양한 차원에서 수행되었다. 분석결과, 이용자들의 사물인터넷 서비스에 대한 전반적인 평가는 낮은 것으로 파악되었고, 그나마 스마트홈이 다른 서비스 대비 상대적으로 높은 평가를 받았다. 제조업 기반의 사업자와 해외 사업자는 다른 특성의 사업자 대비 만족도가 높았다. 본 연구의 결과를 통해 개별 기업 차원에서 특성에 따른 서비스의 개선점을 찾고, 제품경쟁력을 제고하기 위한 시사점을 제공한다.

Modified iCAM06 기법을 이용한 HDR 영상의 tone compression 개선과 평가 (Performance Improvement of Tone Compression of HDR Images and Qualitative Evaluations using a Modified iCAM06 Technique)

  • 장재훈;이성학;송규익
    • 한국멀티미디어학회논문지
    • /
    • 제12권8호
    • /
    • pp.1055-1065
    • /
    • 2009
  • HDR(high dynamic range) 렌더링 기술은 다이내믹 레인지가 9 log unit이 넘는 휘도 범위의 일반 장면을 눈으로 보는 장면의 느낌과 최대한 유사하게 일반적인 영상매체에 출력이 가능하도록 8 bit해상도의 다이내믹 레인지로 변환하는 기술이다. 최근 가장 우수한 성능을 보이는 iCAM06 알고리듬은 iCAM (Image Appearance Modeling)과 CIECAM02를 토대로 만들어 졌으며, 기존 iCAM 모델에서는 제대로 고려하지 못한 공간 필터 링 (spatial filtering) 처리와 여러 시각현상을 고려 하여 설계하였다. 그러나 iCAM06 모델은 상당히 뛰어난 성능을 가지고 있음에도 불구하고 몇 가지 문제점을 가지고 있는데, 그 중의 하나가 사용자 설정 변수들이다. iCAM06에서 필요한 입력 변수들은 렌더링 영상에 큰 영향을 끼치지만, 실험적인 최적치로 결정되는 모호한 변수들이다. 본 논문에서는 iCAM06모델에서 사용되는 사용자 설정 입력 변수들에 대해 다양한 시조건이 고려된 최적의 값을 제공할 수 있도록 정량화된 수식을 제공하고, 또한 개선된 모델을 통하여 향상된 톤 압축의 가시성 결과를 다양한 조건에서의 HDR 영상으로 확인하였다.

  • PDF