• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.90-98
• /
• 2010

Microgrid is a small-scale power system composed of distributed generators, energy storage system and loads, and can operate in the grid-connected mode and the islanded mode. This paper presents optimal design procedures for remote microgrid. The design program is based on the economic evaluations including the feasibility study module, optimal combination and allocation of DERs, power network design and the reduction of the GHG emmission. This program which is suggested in this paper shows good performance as a tool of remote microgrid design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.234-237
• /
• 1987

Recently various control algorithms for industrial manipulators have been proposed. However, computation time, modelling error, and torque type controller design have prevented real-time implementation. As the result, most of performance evaluations of control algorithms have been carried out only by computer simulations. In this paper, we explore real-time implementation to show the feasibility and effectiveness of such algorithms. Experimental results indicate that computed torque method and learning control algorithms can be effectively applied to control industrial manipulators.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.905-907
• /
• 2004

This paper deals with the PM performance evaluations in a variable flux memory motor (VFMM) using a coupled finite element method (FEM) and Preisach modeling, which is presented to analyze the magnetic characteristics of permanent magnets. The focus of this paper is the operation characteristics evaluation relative to magnetizing direction and quantity of permanent magnets on re-, demagnetization condition in a variable flux memory motor(VFMM)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
• /
• pp.3-5
• /
• 2002

This paper proposes a new prototype auxiliary resonant DC link(ARDCL)snubber circuit and deals with its power loss on the basis of actually measured conduction loss characteristic of switching device module. Voltage-type soft switching three phase inverter using proposed ARDCL snubber circuit is presented along with its performance evaluations. And, the power loss analysis of three phase hard and soft switching inverter are carried out from the point of simulation and experimental results.

• Journal of Information Processing Systems
• /
• 제14권4호
• /
• pp.916-925
• /
• 2018

The academic research performance is often quantitatively measured by means of using citation frequency. The citation frequency-based indicators, such as h-index and impact factor, are commonly used reflecting the citation quality to some extent. However, these frequency-based indicators are usually carried out based on the assumption that all citations are equal. This may lead to biased evaluations in that, the attributes of the citing objects and cited objects are significant. A high-accuracy evaluation method is needed. In this paper, we review various citation quality-based evaluation indicators, and categorize them considering the algorithms being applied. We discuss the pros and cons of these indicators, and compare them from four dimensions. The outcomes will be useful for our further research on distinguishing citation quality.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.59-66
• /
• 2016

The evaluations of ride comfort, handling, and steering feeling have been known as one of the dominant factors for vehicle performance assessment. However, those factors have not been analyzed in-depth in conjunction with general ride and handling design parameters. Thus, we have surveyed some previous studies dealing with subjective parameters and quantitative design parameters. We expect this paper provides some guidance to the future research on the field.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.483-486
• /
• 2001

This Paper the state-of-the art indirect induction heated boiler and induction heated hot air producer using the voltage-fed series resonant high-frequency inverter whice can operate in the frequency range from 20kHz to 50kHz. A specially-designed induction heater composed of laminated stainless assembly with many tiny holes and interconnected spot welding points between stainless plates is inserted into the ceramic type vessel with external working coil connected to the inverter and tubelence fluid through this induction heater in moving fluid generates in the vessel. The operating performances of this unique appliance in next generation and its effectiveness are evaluated and discussed from a practical point of view.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1311-1317
• /
• 2008

In this paper, a fault location algorithm using wavelet transform is proposed for HVDC cable lines. The arriving instants of the first and second fault-induced backward travelling waves can be detected by using wavelet transform. The fault distance is estimated by using the time difference between the two instants of backward travelling waves and the velocity of the travelling wave. To distinguish between the backward wave from fault point and the backward wave from the remote end, polarities of backward waves are used. The proposed algorithm is verified varying with fault distances and fault resistances in underground cables of VSC(voltage source converter) HVDC system and CSC(Current Source Converter) HVDC respectively. Performance evaluations of the proposed algorithm shows that it has good ability for a fault location of HVDC cable faults.

• 조명전기설비학회논문지
• /
• 제17권4호
• /
• pp.100-105
• /
• 2003

본 논문은 새로운 보조 공진 DC 링크 스너버 회로를 제안하였으며, 실제적인 스위칭 소자 모듈의 유도 손실특성을 근거로 하여 전력손실의 저감에 대해 다루었다 보조 공진 DC 링크 스너버 회로를 이용하여 전압형 소프트 스위칭 3상 인버터의 회로정수값을 추종하였다. 그리고 실험과 시뮬레이션 결과에 의해서 3상 하드스위칭과 소프트스위칭 인버터의 전력 손실 해석을 하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.76-79
• /
• 2009

This paper presents analyses and performance evaluations of a PWM inverter for a permanent magnet synchronous motor drive under open fault conditions caused by the open fault in one switching device or isolation between the inverter and motor terminal. A fault model for a PWM inverter is derived and experiment is carried out by using DSP TMS320F28335 to provide the basis of fault diagnosis for such a case.