• Membrane and Water Treatment
• /
• v.10 no.1
• /
• pp.19-28
• /
• 2019

To minimize the impact of urbanization, accurate performance evaluation of Low Impact Development (LID) facilities is needed. In Korea, the method designed to evaluate large-scale non-point pollution reduction facilities is being applied to LID facilities. However, it has been pointed out that this method is not suitable for evaluating the performance of relatively small-scale installed LID facilities. In this study, a new design formula was proposed based on the ratio of LID facility area and contributing drainage area, for estimating the Stormwater Interception Ratio (SIR) for LID facilities. The SIR was estimated for bio-retentions, infiltration trenches and vegetative swales, which are typical LID facilities, under various conditions through long-term stormwater simulation using the LID module of EPA SWMM. Based on the results of these numerical experiments, the new SIR formula for each LID facility was derived. The sensitivity of the proposed SIR formula to local rainfall properties and design variables is analysed. In addition, the SIR formula was compared with the existing design formula, the Rainfall Interception Ratio (RIR).

• Nuclear Engineering and Technology
• /
• v.41 no.4
• /
• pp.447-454
• /
• 2009

This paper is a technical review of the research and development results of the Korea Nuclear Instrumentation and Control System (KNICS) project and Nu-Tech 2012 program. In these projects man-machine interface system architecture, two digital platforms, and several control and protection systems were developed. One platform is a Programmable Logic Controller (PLC) for a digital safety system and another platform is a Distributed Control System (DCS) for a non-safety control system. With the safety-grade platform PLC, a reactor protection system, an engineered safety feature-component control system, and reactor core protection system were developed. A power control system was developed based on the DCS. A logic alarm cause tracking system was developed as a man-machine interface for APR1400. Also, Integrated Performance Validation Facility (IPVF) was developed for the evaluation of the function and performance of developed I&C systems. The safety-grade platform PLC and the digital safety system obtained approval for the topical report from the Korean regulatory body in February of 2009. A utility and vendor company will determine the suitability of the KNICS and Nu- Tech 2012 products to apply them to the planned nuclear power plants.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.2
• /
• pp.40-55
• /
• 2015

This study aims to evaluate the efficiency of the forest experience center for children led by the local community as experiential management for forest kindergarten education. For this, an importance and performance analysis was conducted on the forest experience center for children in Geumcheon-gu, which, of the 12 forest experience center for kids in Seoul, is the only one led by the local community. The questionnaire sheet for the analysis consisted of a total of 36 questions, 20 about place facility areas and 16 about management program areas(including 6 questions about the management led by the local community). The questionnaire survey was done during the period between January 12th and January 19th, 2015. The participants in the survey consisted of 15 forest education specialists and 50 teachers from 19 kindergartens who participated in the forest experience program. The number of questionnaire sheets collected and used for analysis was 13 copies and 43 copies, respectively. The mean values of importance and performance on the place facility areas were 4.07 and 3.78 for forest education specialists, and 4.16 and 3.84 for kindergarten teachers, respectively. The mean values of importance and performance regarding the management program area were 4.38 and 4.16 for forest education specialists, and 4.40 and 4.00 for kindergarten teachers, respectively. Both groups evaluated the place facility areas lower than the management program areas. They also evaluated performance lower than importance. In place facility area, 'accessibility', 'safety' and 'connectivity to forest trail', 'loose parts' and 'safety facilities' were required to 'keep up the good work', because they showed higher importance and performance in place facility areas. Even though most items of management as led by the local community including 'forest experience activity support' were evaluated as 'important', some, including 'effort for local revitalization', were evaluated as low in performance. However, as they were evaluated as higher in importance, if they pursue 'concentrate here', it is expected that they will be evaluated as higher in performance. In addition, considering that program areas including 'forest education specialist's role' are labeled under the management led by the local community, it reflected a positive evaluation. As a result, management led by the local community is efficient as a management system for the forest experience center for children in an experiential forest kindergarten education. Going forward, if this management system is durable in 'keep up the good work' and 'concentrate here', the forest experience center for children led by the local community will be an alternative for an effective experiential forest kindergarten education.

• Korean journal of food and cookery science
• /
• v.22 no.5 s.95
• /
• pp.736-745
• /
• 2006

The purposes of this study were to (1) identify foreigners’ evaluation of service performance, (2) define foreigners’ needs for each segment of Korean traditional restaurants, and (3) plan the adaptation strategies for Korean traditional restaurants on foreign countries. From April to July, 2005, 542 foreigners responded to an individual survey. Statistical analyses on SPSS 12.0 for Windows were performed on the survey data using descriptive statistics, factor analysis, reliability analysis, independent-samples t-test and ANOVA. The major findings from the study are as follows. First, among all the attributes, ‘Offer free additional side dishes’ scored the highest, followed by ‘taste of food is good’ and ‘temperature of food is proper’. Second, factor analysis classified the service attributes into four factors in the following order of importance: menu, sanitation, service, and facility and atmosphere. Finally, foreigner groups categorized by their general characteristics, including demographics, showed statistically differences in their evaluation. In consequence, the research findings suggest that operators of Korean traditional restaurants should understand different customers’ needs within and between customer segments.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.7
• /
• pp.591-595
• /
• 2015

The roller rig tester for safety performance evaluation of wheel derailment is a test facility which can give the test load condition to the test wheel, similar to the actual dynamic condition in actual running condition. This study describes the evaluation result on the durability of the resilient wheel equipped with the ring damper and the damping material, and installed in the half part of a full scaled bogie in combination with the primary spring when it rotates under the dynamic condition. The evaluation result on durability of resilient wheel after load test of 2 million cycles shows that the safety of wheel is not affected by the applied load in visual inspection and nondestructive test, however, in the bolt used for fastening the ring damper to the wheel the loosening was found. Accordingly the use of self-locking nut and washer is recommended.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.324-327
• /
• 2003

The needs for the cryocooler which has high reliability and long MTTF are increased in the military and commercial thermal imaging system The gas contamination wear, leakage of the working fluid, fatigue and etc. have the significant effects on the reliability and MTTF(Mean Time To Failure) or MTBF(Mean Time Between Failure) of the Stirling cryocooler. In the KIMM, the Stilting cryocooler with the linear compressor was released after the several performance tests were performed. This paper describe the experimental facility for the MTTF evaluation and some typical results of the Stilling cryocooler.

• Corrosion Science and Technology
• /
• v.11 no.6
• /
• pp.257-262
• /
• 2012

Flow accelerated corrosion (FAC) of the carbon steel piping in nuclear power plants (NPPs) has been major issue in nuclear industry. Rotating cylinder FAC test facility was designed and fabricated and then performance of the facility was evaluated. The facility is very simple in design and economic in fabrication and can be used in material and chemistry screening test. The facility is equipped with on line monitoring of pH, conductivity, dissolved oxygen(DO), and temperature. Fluid velocity is controlled with rotating speed of the cylinder with a test specimen. FAC test of SA106 Gr. B carbon steel under 4 m/s flow velocity was performed with the rotating cylinder at DO concentration of less than 1 ppb and of 1.3 ppm. Also a corrosion test of the carbon steel at static condition, that is at zero fluid velocity, of test specimen and solution was performed at pH from 8 to 10 for comparison with the FAC data. For corrosion test in static condition, the amount of non adherent corrosion product was almost constant at pH ranging from 8 to 10. But adherent corrosion product decreased with increasing pH. This trend is consistent with decrease of Fe solubility with an increase in pH. For FAC test with rotating cylinder FAC test facility, the amount of non adherent corrosion product was also almost same for both DO concentrations. The rotating cylinder FAC test facility will be further improved by redesigning rotating cylinder and FAC specimen geometry for future work.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.5 s.26
• /
• pp.29-35
• /
• 2004

The turbine efficiency is an important factor in power plant, and accurate evaluation of steam turbine performance is the key issue in turbo machinery industry. The difficulty of evaluating the steam turbine performance due to its high steam temperature and pressure environment makes the most steam turbine tests to be replaced by air similarity test. This paper presents how to decide the similarity conditions of the steam turbine test and describes its limitations and assumptions. The test facility was developed and arranged to conduct an air similarity turbine performance test with various inlet pressure, temperature and mass flow rate. The eddy-current type dynamometer measures the turbine-generated shaft power and controls the rotating speed. Pressure ratio of turbine can be controled by back pressure control valve. To verify its test results, uncertainty analysis was performed and relative uncertainty of turbine efficiency was obtained.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.3
• /
• pp.73-82
• /
• 2015

A high altitude test facility which includes supersonic diffuser and ejector has been developed to simulate atmospheric pressure at 25 km using a 500 N class small scale liquid rocket engine. Also high altitude simulation test for the small scale liquid rocket engine was performed to verify the facility's performance. The experimental facility consists of high altitude simulation device, propellants supply system and coolant supply system. Low pressure condition corresponding to about 27 km(0.021 bar) altitude atmosphere was successfully simulated and a small scale liquid rocket engine thrust level was confirmed at the simulated condition by the high altitude test facility verification test.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.06a
• /
• pp.381-385
• /
• 2005

Characterization of particle behavior is becoming more important in performance evaluation of water treatment system as well as in operation of the system because conventional parameter, turbidity has lack of explaining ability on small sized microorganisms such like Cryptosporidium etc. Accordingly, particle counter has been introduced in evaluation and operation of the treatment system. However researches on the relationship between turbidity, particle count and/or different sand/anthracite sizes have not been concurrent. Therefore in this study, the relationship was investigated to improve performance evaluation of sand filter so as to help choosing sand/anthracite effective size as a design parameter of water treatment facility. According to the results, too small or too large effective size media filter reached to turbidity limit(0.1 NTU)earlier. However, because shallow sand layer may cause early breakthrough, the depth of sand layer should be provided enough in order to compromise water quality and productivity.