• 한국터널지하공간학회 논문집
• /
• 제24권2호
• /
• pp.153-170
• /
• 2022

워터젯은 콘크리트와 암석 절삭에 적합하며 소음과 진동이 적어 도심지 시공에 널리 활용되는 기술이다. 최근 한국원자력연구원은 처분터널 내 공학적방벽의 열-수리-역학적 복합거동 현장시험의 콘크리트 플러그를 교란 및 손상 없이 해체하기 위해 연마재 워터젯 기술을 채택 및 적용하였다. 본 연구에서는 플러그 해체를 통한 연마재 워터젯의 터널 내 적용성을 평가하였고, 절삭 결과를 개발된 절삭 모델 결과와 비교하였다. 현장 적용성에 관해서는, 워터젯 활용은 경로선택이 용이하였으며 주변부의 추가적인 교란을 발생시키지 않았다. 펌프의 소음은 공회전 시 64.9 dB로 국내 생활소음·진동의 규제기준을 만족하였으나 공중 분사 및 절삭 시에는 터널 내에서 측정되어 그 기준을 상회한 것으로 나타났다. 절삭 모델 검증을 위해 연마재 워터젯의 반복 절삭, 유량, 연마재 투입량 및 이격거리를 주요 변수로 선정하였고 절삭 모델로 계산된 절삭 부피와 측정된 부피의 오차는 1회 절삭 시 12~13%, 2회 절삭 시 16%를 보였다. 절삭 깊이와 폭은 이격거리에 큰 영향을 받았으며, 이격거리가 작을수록 오차가 감소하는 경향을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.49.3-49
• /
• 2002

$\textbullet$ Surface Acoustic Wave $\textbullet$ Tactile Display Principle $\textbullet$ Installed on PC Mouse Button $\textbullet$ Vibration Measurement $\textbullet$ Demonstration on PC Screen $\textbullet$ Comparison Tests

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 하계학술발표대회
• /
• pp.194-194
• /
• 2005

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.869-870
• /
• 2005

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.1154-1155
• /
• 2005

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.961-962
• /
• 2005

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1083-1095
• /
• 2016

The design of Prototype Gen-IV Sodium-Cooled Fast Reactor (PGSFR) has been developed and the validation and verification (V&V) activities to demonstrate the system performance and safety are in progress. In this paper, the current status of test activities is described briefly and significant results are discussed. The large-scale sodium thermal-hydraulic test program, Sodium Test Loop for Safety Simulation and Assessment-1 (STELLA-1), produced satisfactory results, which were used for the computer codes V&V, and the performance test results of the model pump in sodiumshowed good agreement with those in water. The second phase of the STELLA program with the integral effect tests facility, STELLA-2, is in the detailed design stage of the design process. The sodium thermal-hydraulic experiment loop for finned-tube sodium-to-air heat exchanger performance test, the intermediate heat exchanger test facility, and the test facility for the reactor flow distribution are underway. Flow characteristics test in subchannels of a wire-wrapped rod bundle has been carried out for safety analysis in the core and the dynamic characteristic test of upper internal structure has been performed for the seismic analysis model for the PGSFR. The performance tests for control rod assemblies (CRAs) have been conducted for control rod drive mechanism driving parts and drop tests of the CRA under scram condition were performed. Finally, three types of inspection sensors under development for the safe operation of the PGSFR were explained with significant results.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.368-371
• /
• 2008

The optimal operation condition of gasifier is one of the most important parameters to increase efficiency and reliability in IGCC plant. Also the prediction of the syngas composition and quantity must be predicted to carry out process design of the gasification plant. However, the gasifier process licensor are protective with information on process design and optimal gasifier design conditions. So, the most of process studies in the engineering company for gasification plant have carried out to look for key parameters and optimal design conditions using several prediction methods. In this paper, we present the estimated preliminary optimal operation condition of the 300MW Demonstration Entrain Flow Gasifier using Aspen Plus. The gasifier operation temperature considering slag flow was predicted by FactSage software and Annen Model.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.203-208
• /
• 2009

This paper presents demonstration study results derived through field testing of a solar assisted cooling and heating system for the library of a cultural center building located in Gwangju, Korea. The area of demanded cooling and heating for building was about 350m2. Solar hot water was delivered by means of a 200m2 array of evacuated tubular solar collector (ETSC) to drive a single-effect (LiBr/H2O) absorption chiller of 10RT nominal cooling capacity. From March in 2008 to February in 2009, demonstration test were performed for solar cooling and heating system. After experiments and analysis, this study found that solar thermal system was 84% for the solar hot water supply and 12% for space heating and 4% for space cooling.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.156-161
• /
• 2004

The application of solar energy, in the field of alternative energy, was on the increase tendency. In the case of advanced nations, through continuous R&D, solar hot water heater with high efficiency has been used for the house and the industrial process on business, advanced nations were reached up the experimental stage of solar generation system. But, the actual circumstance of the domestic has been not accomplished the popularization of solar hot water heater and the settlement of it which is the fundamental stage of the solar energy usage. This trouble, the domestic was flooded with small enterprise for producing solar hot water heater, was caused by the popularization and the production without verification of performance. To supply the monitoring program for evaluating solar hot water heater, this research was purpose to improve the technical development of the enterprise for producing solar-heat hot-water-boiler and served as an aid for the enlargement and the popularization on solar energy.