• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.607-615
• /
• 2019

In this paper, the electromagnetic effects on the discontinuity structures of the frequency selective radome in manufacturing process based on the X-band were analyzed. In order to fabricate a curved radome using a planar frequency selective surface structure, it is assumed that gaps, slanted gaps, pattern damage, and pattern misalignment between FSS patterns, which are discontinuous elements that can occur at the joint surface of the FSS panel. FSS specimens including continuous elements were fabricated and the frequency transmission characteristics were measured in a free space measurement environment. From the measurement results, resonance frequency shift, transmission performance degradation, and bandwidth variations were found to be the largest when the damaged pattern was bonded to the junction of FSS panels.

• Management Science and Financial Engineering
• /
• v.4 no.2
• /
• pp.43-58
• /
• 1998

Packet switch is a key component in high speed digital networks. This paper investigates congestion phenomena in the packet switching with input buffers. For large value of switch size N, mathematical models have been developed to analyze asymptotic maximum switch throughput under nonuniform traffic. Simulation study has also been done for small values of finite N. The rapid convergence of the switch performance with finite switch size to asymptotic solutions implies that asymptotic analytical solutions approximate very closely to maximum throughputs for reasonably large but finite N. Numerical examples show that non-uniformity in traffic pattern could result in serious degradation in packet switch performance, while the maximum switch throughput is 0.586 when the traffic load is uniform over the output trunks. Window scheduling policy seems to work only when the traffic is relatively uniformly distributed. As traffic non-uniformity increases, the effect of window size on throughput is getting mediocre.

• Phonetics and Speech Sciences
• /
• v.1 no.1
• /
• pp.55-62
• /
• 2009

This paper proposes an improved method to verify a keyword segment that results from a word spotting system. First a baseline word spotting system is implemented. In order to improve performance of the word spotting systems, we use a two-pass structure which consists of a word spotting system and an utterance verification system. Using the basic likelihood ratio test (LRT) based utterance verification system to verify the keywords, there have been certain problems which lead to performance degradation. So, we propose a method which uses phone-level log-likelihood ratios (PLLR) patterns in computing confidence measures for each keyword. The proposed method generates weights according to the PLLR patterns and assigns different weights to each phone in the process of generating confidence measures for the keywords. This proposed method has shown to be more appropriate to word spotting systems and we can achieve improvement in final word spotting accuracy.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.228-236
• /
• 2014

Towed array SONAR is deformed because it operates in fluid such as an ocean. It especially undergoes significant change in shape as a towing vessel takes a turn. In this case, beam pattern synthesis of the line array is limited, resulting in degradation in quality such as signal-to-noise ratio. This paper presents a modified two-step least squares algorithm based on the two-step least squares method. The shape of the sea-operated line array formation with the towing vessel changing course(angle) was modeled and the algorithm was subsequently applied. While changing course and location of the main lobe in beam pattern was altered, signal-to-noise ratio of steering beam pattern synthesis was analyzed by algorithm (proposed and others). As a result, the proposed algorithm presented improvement in performance by 2dB compared to other algorithms while forming relatively constant beam pattern.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.22-23
• /
• 2016

This study aims to derive the optimal condition that ensures the monolithicity of ultra-high performance concrete (UHPC), through the evaluation of bonding shear performance with respect to the time of cold joint occurrence during the placement. From the direct shear test, while the normalized bonding shear strength reduction of UHPC with the delay time of 15 minutes was the lowest at around 8%, a dramatic degradation of bonding shear performance was observed after 15 minutes. XRD analysis of the middle and surface sections was performed in order to analyze the composition of the thin film formed at the surface of UHPC, and as a result, the main ingredient appeared to be SiO₂ from the XRD pattern of middle and surface sections, which is believed to be the result of the rising of SiO₂-based filler, used as anadmixture in this study, toward the surface, due to its low specific gravity.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.22-32
• /
• 2014

Durability is one of the most important and attractive subjects in concrete research field because not only durability of concrete is reduced by various degradation factors but also its reduction adversely influences the structural performance and service life of concrete structure. For this reason, a considerable amount of papers associated with concrete durability have been published and those researches were mainly focused on the changes of intrinsic properties of concrete due to chemicophysical degradations. However, the relationship between durability of concrete and structural behavior of concrete member has not been well established yet. In this study, calcium leaching degradation, a cause of concrete strength reduction, was dealt with. The experiments of compressive and flexural behavior of degraded concrete member were performed to evaluate the characteristics of structural behavior according to degradation level. Finally, the results from the experiments were compared with those obtained from nonlinear FEM analysis. The results from this study clearly showed that leaching degradation leads to decrease in compressive strength and compressive behavior evolves from brittle to ductile failure pattern during the degradation process. Load capacity and flexible rigidity of the degraded RC member decreased when the degradation level increased, in compressive zone. Additionally, it was found that the values from nonlinear FEM analysis, CDP model in ABAQUS, coincided well with the experimental results.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.1
• /
• pp.59-65
• /
• 2008

Six total mixed rations (TMR) containing 0, 4, 6, 8, 10, 12% tannin (TMR I-VI), using Accacia nilotica pods as a source of tannin, were used to study the effect of Acacia tannin on in vitro nutrient digestibility and gas production in goats. This study also investigated the degraded products of Acacia nilotica tannin in goat rumen liquor. Degraded products of tannins were identified using high performance liquid chromatography (HPLC) at different hours of incubation. In vitro digestibility of dry matter (IVDMD) and organic matter (IVOMD) were similar in TMR II, and I, but declined (p<0.05) thereafter to a stable pattern until the concentration of tannin was raised to 10%. In vitro crude protein digestibility (IVCPD) decreased (p<0.05) with increased levels of tannins in the total mixed rations. Crude protein digestibility was much more affected than digestibility of dry matter and organic matter. In vitro gas production (IVGP) was also reduced (p<0.05) with increased levels of tannins in the TMR during the first 24 h of incubation and tended to increase (p>0.05) during 24-48 h of incubation. Gallic acid, phloroglucinol, resorcinol and catechin were identified at different hours of incubation. Phloroglucinol and catechin were the major end products of tannin degradation while gallate and resorcinol were produced in traces. It is inferred that in vitro nutrient digestibility was reduced by metabolites of Acacia nilotica tannins and ruminal microbes of goat were capable of withstanding up to 4% tannin of Acacia nilotica pods in the TMR without affecting in vitro nutrient digestibility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6B
• /
• pp.1127-1135
• /
• 2000

The beamforming procedure in Adaptive Array Antenna System is affected by signal degradation and data rate due to DS-CDMA characteristics. Until this time, a lot of techniques are suggested to overcome this problems. This paper shows the simulation result about the beamforming performance of symbol level system that process slow data rate, compensated signal by despreading procedure in front of beamformer, and that of chip level system that process chip level signal without it. we analysis the performance using MSE, beam pattern, scattering points of beamformer output. chip level system is superior to symbol level system in time varying channel, while the performance of them didn't have difference in static channel.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.541-556
• /
• 2005

The memory access latency of the system has been a primary factor of performance degradation in single-processor system and multi-processor system. The remote memory access latency takes a lot of overhead over the local memory access latency especially in the distributed shared-memory system. To resolve this problem, the multi-level cache architecture that contains a remote cache in the multi-processor system has been proposed. In this paper, we propose a new cache replacement policy that improves the performance of the multi-processor system with the remote cache. If the multi-level cache keeps the multi-level inclusion(MLI) property and uses the LRU(Least Recently Used) cache replacement policy, the LRU information of the higher-level cache(a processor cache) would be different with that of the lower-level cache(a remote cache). In this situation, the replacement of a remote cache line can induce the exchange of a processor cache line that is used by the processor. It is a main factor of performance degradation in a whole system. To alleviate this disadvantage of the LRU replacement polity, the new policy analyses tht processor's remote memory access pattern of each node and uses this information to reduce the number of invalidations of the useful cache line in the higher-level cache. The new replacement policy of the remote cache can improve the performance by $3.5\%$ in maximum and $2.5\%$ in average on SPLASH-2 benchmarks, compared to the general LRU cache replacement policy.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.593-600
• /
• 2020

The equipment for marine IoT service have to overcome the effect of seawater. Furthermore, the free floating transmitter in seawater will be less affected by the seawater environment. The results of the design and fabrication of antenna, which is embedded in buoy, are shown in this research. The proposed antenna is used to supervise the states of fishing gears in monitoring system for real-name system of electric fishing gear. The selected frequency band of the proposed antenna is 920 MHz, and PCB pattern type is selected for subminiature and light weight. It is confirmed that RF characteristics is more degraded, however, the radiation is gradually upward as the contact surface of buoy with seawater is more broaden through the simulation results. That is, the RF performance of the proposed antenna is more deteriorated but beam radiation characteristics is more suited the marine IoT, the seawater effect is more increased. It is expected that the proposed antenna will contribute the implementation of IoT network based on low power wide area (LPWA) when the degradation of RF performance will be settled.