• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.544-546
• /
• 2004

This paper designs and evaluates a complementary filter for fusion of inertial sensor signals. Specifically, the designed filter is applied to inverted pendulum control where the pendulum's angle information is obtained from low-cost tilt and gyroscope sensors instead of an optical encoder. The complementary filter under consideration is a conventional one which consists of low- and high-pass filters. However, to improve the performance of the filter on the gyroscope, we use an integrator in the filter's outer loop. Frequency responses are obtained with both tilt and gyroscope sensors. Based on the frequency response results, we determine appropriate parameter values for the filter. The performance of the designed complementary filter is evaluated by applying the filter to inverted pendulum control. Experiments show that the performance of the designed filter is comparable to that of an optical encoder and low-cost inertial sensors can be used for inverted pendulum control with the heir of sensor fusion.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.648-654
• /
• 2007

This paper presents the result of a comparison study to evaluate the performance of several semi-active control algorithms for use with large-scale MR damper applied to a building structure under seismic excitation using real-time hybrid test method. Recently, a variety of semi-active control algorithm studies are developed and generally evaluated the performance by using numerical analysis. In this paper real-time hybrid test method was applied to performance evaluating of semi-active control algorithms including a clipped optimal algorithm and the modulated homogeneous friction algorithm.

• Journal of Korean Society for Quality Management
• /
• v.32 no.4
• /
• pp.169-183
• /
• 2004

The synthetic control chart (SCC) proposed by Wu and Spedding (2000) is to detect shifts in the process mean. The performance was re-evaluated by Davis and Woodall (2002), and the steady-state average run length (ARL) performance was shown to be inferior to cumulative sum (CUSUM) or exponentially weighted moving average (EWMA) chart This paper proposes a simple adaptive scheme to improve the performance of the synthetic control chart. That is, once a non-conforming (NC) sample occurs, we investigate the next L-consecutive samples with larger sample sizes and shorter sampling intervals. We employ a Markov chain model to derive the ARL and the average time to s19na1 (ATS). We also propose a statistical design procedure for determining decision variables. Comprehensive comparative study shows that the proposed control chart is uniformly superior to the original SCC or double sampling (DS) Χ chart and comparable to the EWMA chart in ATS performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.614-617
• /
• 1995

The unbalance heavy-load elevation driving systems are composed of rotating link-mechanism and hydraulic cylinder which actuates elevation and compensates the static unbalance moment of supporting mechanism. Control and compensation of gun driving is very difficult because these mechanism imply highly nonlinearities due to hydraulic fluid characteristics and mechanical rotation of link-mechanism. In this study, through the analysis of manufactured link-mechanism, the optimal link-mechanism design of the elevating system is suggested. Also to estimate the control performance of the unbalance heavy-load elevation servo-control driving system, modeling and simulation of the system are carried out. To prove the reliability of performance estimation program,simulation results are compared with the experimental results. Both results are similar, therefore this program will be helpful to study the control performance improvement of the system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.51.1-51
• /
• 2001

Teleoperation is a rapidly progressing field promising to have significant application in space, mining, medical, and other areas. Unfortunately, significant communication delays are expected in teleoperation. With this problem, the two major issues in teleoperation are stability robustness and transparency performance. Recent work in bilateral teleoperation in the two-channel showed that for any two-channel control architecture, stability robustness is enhanced if the feedforward control parameters are lowered. In this paper, we analyze the stability and performance robustness of the three channels control architectures using the passivity-based Llewellyn´s absolute stability criterion as wall as the minimum values and Z-width´s of the operator and environment transmitted impedances. And the stability and the performance robustness of two and three channels control architectures are quantitatively compared.

• Journal of Power System Engineering
• /
• v.18 no.5
• /
• pp.28-34
• /
• 2014

This paper deals with optimum PI controller design using genetic algorithm to improve control performance and robustness for an oil cooler system. The optimum PI gain was found to minimize an object function, integrated absolute error, and to satisfy control design specifications such as overshoot and settling time based on practical transfer function of the oil cooler system. The control performance and robustness were investigated by comparing indicial responses and Bode diagram analysis with respect to three kinds of PI gains obtained from different gain decision manners. Moreover, the robustness against to input disturbances, sinusoidal wave form and abrupt single pulse, was evaluated. The computer simulation results showed that the suggested optimum gain can establish desirable control performance and strong robustness with easy design process.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.126-131
• /
• 2015

The accuracy of motor parameter measurement is necessary to improve the performance of vector control of an induction motor. The rotor time constant affects the performance of controller and also the resistance and leakage inductance of stator are very important design parameters of current and speed controller. In this paper a new modified motor parameter measurement methods for high performance speed control of vector control of an induction motor are proposed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.7
• /
• pp.9-15
• /
• 2012

This paper is proposed the adaptive fuzzy neuro controller(AFNC) for high performance of induction motor drive. The design of this algorithm based on the AFNC that is implemented using fuzzy controller(FC) and neural network(NN). This controller uses fuzzy rule as training patterns of a NN. Also, this controller adjusts the weights between the neurons of NN to minimize the error between the command output and the actual output using the back-propagation method. The control performance of the AFNC is evaluated by analysis in various operating conditions. The results of analysis prove that the proposed control system has high performance and robustness to parameter variation, and steady-state accuracy and transient response.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.184-185
• /
• 2017

In this study, the performance of low-priced ceramic panels developed to improve the poor interior residential environment of the underprivileged was evaluated by comparing them with the performance of I Company (Japan)'s Eco karat, a representative humidity control panel. Experimental results showed that the humidity control performance of the Ceramic panel was 53.33g/㎡, which was about 54% less effective than 98.88g/m2 of the Ecokarat. As a result, it is believed that the need to improve the quality of the Ceramic panels.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.7-13
• /
• 1999

The unbalanced heavy-loaded elevation-driving system is composed of link-mechanism, hydraulic cylinder and compensator for the static unbalanced moment of the load. Control and compensation of elevation-driving system is very difficult because these mechanisms imply highly nonlinear properties due to hydraulic fluid characteristics and mechanical rotation of link-mechanism. In this study, through the analysis of the link-mechanism, the optimal design of the link-mechanism is suggested. Also to estimate the control performance of the unbalanced, heavy-loaded servo-controlled system, modeling and simulation of nonlinear system are carried out. To prove the validity of performance estimation program, simulation results are compared with the experimental results. Both results are similar, therefore this program will be helpful to study the improvement of the system control performance.