• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.136-140
• /
• 2001

The 3rd generation mobile telecommunication fields are being standardized and developed in two parts, 3GPP and 3GPP2. These two parts have established each Network Architecture Models to achieve the goals basically required in the 3rd generation and to make it progress to IP network in the future. To achieve these goals many system architectures are proposed. Not only functional aspects but also performance aspects are considered as major factors. This paper proposes a new method of performance evaluation modeling and simulation that improved the existing way. The method proposed in this paper is Aspect oriented logical performance analysis Modeling and Simulation method. This proposed method is expected to improve efficiency of performance analysis modeling and simulation on the 3rd generation mobile telecommunication system.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.15-16
• /
• 2005

In this study, the characteristics of NOx reduction by using charge air moisturizer system were evaluated by engine performance simulation in medium speed diesel engines. The results of performance simulation were verified by experimental results of single cylinder medium speed diesel engine equipped with charge air moisturizer system. Performance simulation was carried out to evaluate charge air moisturizer system of turbocharged diesel engine, HYUNDAI HiMSEN 9H25/33 engine. Those results show 50% NOx reduction at dew point $80^{\circ}C$ and charge air pressure 4bar.

• Nuclear Engineering and Technology
• /
• 제44권2호
• /
• pp.103-122
• /
• 2012

Significant advances in computational performance have occurred over the past two decades, achieved not only by the introduction of more powerful processors but the incorporation of parallelism in computer hardware at all levels. Simultaneous with these hardware and associated system software advances have been advances in modeling physical phenomena and the numerical algorithms to allow their usage in simulation. This paper presents a review of the advances in computer performance, discusses the modeling and simulation capabilities required to address the multi-physics and multi-scale phenomena applicable to a nuclear reactor core simulator, and present examples of relevant physics simulation codes' performances on high performance computers.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.721-727
• /
• 2019

The purpose of this study is to investigate the relationship between clinical judgment and nursing performance based on myocardial infarction simulation applied to nursing students. Method: 39 fourth grade nursing students participated in this explanatory study with sampling of accommodations. The Lasater Clinical Judgment Rubric has been used in self-reported clinical trials and satisfaction with judging practices. Data were analyzed by descriptive statistics, t-test and Pearson's correlation coefficient using SPSS WIN 19. Results: Scenarios with myocardial infarction were scored by self-reported clinical judgment. Total mean score of clinical judgment and total mean value of clinical judgment is 4.17 ± 0.80. Correlation Between Variables After Simulation Practice is highly significant for providing positive clinical judgment and satisfaction with nursing performance. Conclusion: The simulation-based practice associated with adult nursing in myocardial infarction was useful for clinical judgment and nursing performance satisfaction, which improved the core basic skills of nursing students.

• Physical Therapy Rehabilitation Science
• /
• 제13권1호
• /
• pp.18-25
• /
• 2024

Objective: This study is a single-group pre-post experimental study to determine the effects of simulation-based practice education on nursing students' self-efficacy, performance confidence, and educational satisfaction. Design: Single-group pre-post experimental studies Methods: This study was conducted from September 1, 2023 to November 30, 2023 for nursing undergraduate students in a simulation based practical education program. The subjects were provided with learning materials about an acute myocardial infarction case with chest pain for preliminary learning. After that, they were divided into teams of 6 people and asked to do self-study for 2 hours per team, twice a week, before conducting simulation practice. For the simulation based practical education, the participants were divided into 9 teams of 6 people each, and each team had 10 minutes for orientation, 15 minutes for scenario operation, and 50 minutes for debriefing. Results: After the simulation based practical education, self-efficacy increased statistically significantly from a mean of 3.51 before training to a mean of 3.80 after training (t=-2.12, p=0.038). However, there was no significant difference in performance confidence. There was a significant positive correlation between self-efficacy and performance confidence (r=0.62, p<0.001) and training satisfaction (r=0.67, p<0.001) after the simulation based practical education. Self-confidence was also significantly correlated with educational satisfaction (r=0.76, p<0.001). Conclusions: The results of this study showed that utilizing simulation-based practical education can increase nursing students' self-efficacy, which positively affects their performance confidence and educational satisfaction. Therefore, simulation-based practical education is an effective nursing education method that can improve nursing students' practical skills.

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.776-787
• /
• 2001

The turbofan engine performance analysis for a medium scale commercial aircraft was carried out and the LQR control scheme for performance optimization was studied. By using scaled component maps from well-known CF6 engine characteristics, the steady-state performance analysis result was compared with BR715-56 engine performance data. The transient performance analysis was performed with four fuel schedules. The linear simulation was done at the maximum take-off condition. The real time linear simulation was performed by interpolation of the system matrices, which used the least square method as the function of LPC rotational speed. By using linear system matrices of design point, the LQR controller which used control variables for the fuel flow and the LPC bleed air was designed.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.100-107
• /
• 2004

The development of a Web-based powertrain performance simulation system is introduced. The development approach of system architecture and each module is introduced along with the H/W and S/W used. The interface with all users is developed via a JAVA Applet. The powertrain modeling and other job history data of a user is managed systematically on the server by database to increase the reusability of the data. A self-developed program using object-oriented programming is used as a solver for the performance simulation. The graph tool for the analysis of simulation results has the collaboration support developed based on JAVA so that synchronous users can view the same result. As a result, the powertrain simulation is possible only with Web-browser for the user and the collaboration support among the relevant engineers is possible.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권4호
• /
• pp.452-474
• /
• 2010

Formidable growth of Internet technologies has revealed challenging issues about its scale and performance evaluation. Modeling and simulation play a central role in the evaluation of the behavior and performance of the large-scale network systems. Large numbers of nodes affect simulation performance, simulation execution time and scalability in a weighty manner. Most of the existing simulators have numerous problems such as size, lack of system theoretic approach and complexity of modeled network. In this work, a scalable discrete-event modeling approach is described for studying networks' scalability and performance traits. Key fundamental attributes of Internet and its protocols are incorporated into a set of simulation models developed using the Discrete Event System Specification (DEVS) approach. Large-scale network models are simulated and evaluated to show the benefits of the developed network models and approaches.

• 한국시뮬레이션학회논문지
• /
• 제12권4호
• /
• pp.103-111
• /
• 2003

A distributed sewer cluster system is a cost-effective system to provide a service application for clients with reliable, scalable, available, and fault-tolerant features. In order to provide high quality services, it is necessary to evaluate service performances, tune the server system, and analyze performances. In this paper, we propose a simulator to generate workloads based on statistic configuration according to estimated application traffics, apply workload scheduling algorithms, and evaluate the simulation results. We introduce the simulator design modelling and architecture. By using flexible parameters, the simulator is able to generate various patterns of workloads with different statistics, and configure system environments such as the number of server nodes, system resources considered, and their capacities. With this simulator, we introduce two scenarios: one is to find appropriate thresholds for the best performance of cluster system, and the other is to find the suitable scheduling algorithm for workload characteristics of service applications.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2003년도 추계학술대회 및 정기총회
• /
• pp.27-34
• /
• 2003

A distributed server cluster system is a cost-effective system to provide a service application for clients with reliable, scalable, available, and fault-tolerant features. In order to provide high quality services, it is necessary to evaluate service performances, tune the server system, and analyze performances. In this paper, we propose a simulator to generate workloads based on statistic configuration according to estimated application traffics, apply workload scheduling algorithms, and evaluate the simulation results. We introduce the simulator design modelling and architecture. By using flexible parameters, the simulator is able to generate various patterns of workloads with different statistics, and configure system environments such as the number of server nodes, system resources considered, and their capacities. With this simulator, we introduce two scenarios: one is to find appropriate thresholds for the best performance of cluster system, and the other is to find the suitable scheduling algorithm for workload characteristics of service applications.