• 화약ㆍ발파
• /
• 제30권2호
• /
• pp.43-51
• /
• 2012

현재까지 발파해체는 건축물과 토목구조물들을 대상으로 하고 있으나 본 연구에서는 밀폐철재구조물(압력용기) 내부에 물을 채우고 폭약의 힘이 작용하는 해체에 관한 기초연구를 하였다. 일정양의 폭약을 밀폐압력용 기내에 넣고 완전 탄성체로 가정할 수 있는 물($H_2O$)을 압력전달 매개체로 하여 밀폐압력용기의 파괴양상을 관찰하였다. 이때 폭발압력은 Abel의 상태방정식을 이용하여 정량화 하였으며, 그 결과 압력전달 매개체(물)가 있을 경우 밀폐압력용기의 인장강도보다 작은 힘으로 파괴가 발생하였으며, 그렇지 않은 경우에는 약 7.1~8.5배의 폭발압력이 필요하였다. 또한, 압력전달 매개체가 없을 경우(공기만 존재) 폭발압력은 일정값에 도달하기 전까지 파괴에 영향을 미치지 못하고 완전 소산 또는 비산하는 현상을 나타내었다. 실험에 이용한 강철(steel)로 이루어진 밀폐압력용기는 파괴되는 양상에 있어서 대부분 탄성-소성파괴의 형태를 보였으며 최초 항복이 일어나는 지점은 용접부위의 경계부분으로 열소성 변형을 받았다고 판단되는 부분이었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.14-17
• /
• 1999

The wrinkling behavior of a thin sheet with perfect geometry is a kind of compressive instability. The compressive instability is influenced by many factors such as stress state mechanical properties of the sheet material geometry of the body contact conditions and plastic anisotropy. The analysis of compressive instability in plastically deforming body is difficult considering all the factors because the effects of the factors are very complex and the instability behavior may show wide variation for small deviation of the factors. In this study the bifurcation theory is introduced for the finite element analysis of puckering initiation and growth of a thin sheet with perfect geometry. All the above mentioned analysis and the post-bifurcation behavior is analyzed by introducing the branching scheme proposed by Riks. The finite element formulation is based on the incremental deformation theory and elastic-plastic material modeling. in order to investigate the effect of plastic anisotropy on the compressive instability a square plate that is subjected to compression in one direction and tension in the other direction is analyzed by the above-mentionedfinite element analysis. The critical stress ratios above which the buckling does not take place are found for various plastic anisotropic modeling method and discussed. Finally the effect of plastic anisotropy on the puckering behavior in the spherical cup deep drawing process is investigated.

• 한국철도학회논문집
• /
• 제16권3호
• /
• pp.202-206
• /
• 2013

해중철도는 파도와 바람의 영향을 크게 받지 않는 해중을 통과하는 터널내에 고속열차가 운행하는 철도시스템으로 수심에 관계없이 설치할 수 있고, 모듈별 육상 제작후 해상 대조립으로 건설이 가능하기 때문에 건설비용이 획기적으로 절감될 수 있는 장점이 있다. 본 연구에서는 해중철도의 개념설계안을 소개하고 안전성 확보를 위해 해중에서 잠수함과 충돌하는 경우를 대상으로 해중철도의 구조적 거동을 해석할 수 있는 기법을 제시하고자 한다. 탄성지지된 보이론을 활용하여 해중철도 함체의 등가 질량을 계산하고 잠수함과 완전탄성 충돌시 속도를 계산하고 에너지 보존의 원리에 따라 함체의 변형량과 최대굽힘모멘트를 계산하였다. 결과의 검증을 위해 보요소를 사용하여 충돌 유한요소해석을 실시하였고, 비교를 통해 타당성을 확인하였다. 본 연구에서 제안한 충돌 이론 해법은 간편하게 함체의 변형량과 최대굽힘모멘트를 계산할 수 있어 초기 설계시에 효과적으로 활용될 수 있다.

• Computers and Concrete
• /
• 제21권2호
• /
• pp.219-229
• /
• 2018

In this paper, a modified rigid body spring model (RBSM) is proposed and used to analyze the damage and failure process of reinforced concrete (RC) structures. In the proposed model, the concrete is represented by an assembly of rigid blocks connected with a uniform distribution of normal and tangential springs to simulate the macroscopic mechanical behavior of concrete. Steel bars are evenly dispersed into rigid blocks as a kind of homogeneous axial material, and an additional uniform distribution of axial and dowel springs is defined to consider the axial stiffness and dowel action of steel bars. Perfect bond between the concrete and steel bars is assumed, and tension stiffening effect of steel bars is modeled by adjusting the constitutive relationship for the tensile reinforcement. Adjacent blocks are allowed to separate at the contact interface, which makes it convenient and easy to simulate the cracking process of concrete. The failure of the springs is determined by the Mohr-Coulomb type criterion with the tension and compression caps. The effectiveness of the proposed method is confirmed by elastic analyses of a cantilever beam under different loading conditions and failure analyses of a RC beam under two-point loading.

• 복식
• /
• 제53권3호
• /
• pp.137-154
• /
• 2003

The purpose of this study is firstly to survey the social and cultural background of 20th century and women's status, and to identify what the ideal body is like and what the elements of outer garment and underwear are and the techniques to incarnate the ideal beauty. Various papers are referenced for theoretical study and the elements and techniques of underwear are analyzed based on photographical materials. This paper concludes as follows. In 1910's, ideal beauty has changed to H-style. In other words, the outer garment has confined the lower part of the body with plain H-type Hobble silhouette to express plump bust, somewhat slim waist, and small hips, As the underwears, cylindrical corsets which fasten from under the bust down to lap, brassiere which are helpful for plump bust, and artificial busts were worn. In 1920's, outer garment were Straight box silhouette style which were cut as tubular without dart, and the underwears were corselets which have been tubular from the bust to hip and the tubular chemi-knickers. The former corsets which had been hard-boned and been fastened with strings have been replaced by the hook closure due to the development of elastic joining method. In 1930's, women pursued perfect body showing the line of bust, waist, and hip. In order to express elegant beauty of female of Slim and long silhouette, Doter and underwear have been cut with bias and gore, and soft and flexible materials were flowed along the body. World war II in 1940's has made the women as social. Ideal beauty has changed to Short straight box silhouette which no more shows body line. Outer and underwears were simple and Practical style. In 1950's, ideal beauty was well-matured, elegant Women which were represented by round shoulder, conical breast, tiny waist and round hip. Outer garment showed Hourglass silhouette representing the body-tight suits with round shoulder pad and the wide flare skirts. As the underwears, conical brassiere by top circular stitch were preferred for plump and bulged bust and tight corsets for tiny waist and magnificent petticoats were worn.