• Journal of the Korean Wood Science and Technology
• /
• v.13 no.2
• /
• pp.14-34
• /
• 1985

One of the techniques for altering the properties of wood that has received considerable attention in the last twenty years is the formation of a wood-polymer composite (WPC) by irradiation and heat-catalyst polymerization of a monomer incorporated into the wood matrix. Wood-polymer composites are the new products having the superior mechanical and physical properties and the combinated characteristics of wood and plastic. The purpose of this experiment was to obtain the basic data for the improvement of wooden materials by manufacturing WPC and Staypak. The species examined was Hyunsasi-Namoo (Populus alba ${\times}$ P. glandulosa) which had not been utilized yet. Methylmethacrylate (MMA) as monomer, benzoyl peroxide (BPO) as initiator and methyl alcohol as bulking agent were used. The monomer containing BPO was impregnated into wood pieces by the dipping and the vacuum process for 2 hours. After impregnation, the treated samples were polymerized on the hot press with pressure and heat-catalyst methods. The results obtained were summarized as follows 1. The monomer loading into wood by the dipping process was 12.13 percent and 29.99 percent by the vacuum. The polymer loading into wood by the dipping process was 6.79 percent and 15.44 percent by the vacuum. 2. Comparing with Staypak, antishrink efficiency (ASE) of WPC was 12.5 to 13.6 percent on the radial direction and 14.70 to 18.63 percent on the tangential. Antiswelling efficiency (AE) was 14.40 to 17.22 percent on the radial direction and 17.18 to 42.1 8 to 42.14 percent on the tangential. Reduction in water absorptivity (RWA) was 8.19 to 15.5 percent. As a whole, the vacuum process was better than the dipping. 3. The specific gravity of control, Staypak and WPC were 0.44, 0.66 and 0.61 to 0.62, respectively. 4. In the bending strength test, the strength in case that the load direction is on the radial surface was greater than that which the load direction is on the tangential. 5. Increasing rate of stress at proportional limit in compression perpendicular to grain was 72.26 percent in case of WPC by the dipping process, 78.93 percent by the vacuum and 99.09 percent in case of Staypak.

• Journal of the Korean Society of School Health
• /
• v.4 no.2
• /
• pp.78-89
• /
• 1991

In order to understand how the parents who have the children of elementary school actually recognising their children's tonsillectomy, and then, analyze its motivation, and how many children was treated tonsillectomy in our country, we hereby analyzed and intended for 3,882 of the children of elementary school in Susan area from 1st grade to the 6 years grade by the questionnaire through the parents of students. The viewpoint about the requirement of tonsil in the human body, the only 25.1 percent had responded: absolutely necessary. The respondents who responded absolutely necessary were highly ranked according to the urban, medium urban and then outskirt area. The advisory person who whishes, to be tonsillectomised was physicians 76.2 percent of the highest point. Operation had performed mostly the age of 6 year and had appeared the questionnaire through 6-9 year old, and they utilized their operational period was at the time of summer vacation of August 31.5 percent and winter vacation of December and January 16.7 percent respectively, and place of implementation was accounted for 87.0 Opercent at the hospitals and the motivation of tonsillectomy had motivated during one had been medical examination and advisory of the physician was appeared highest rate of 51.9 percent. In the case who's symptom of the cold and high fever somewhat improved was appeared as 79.6 percent and the other hand, 5.6 percent of them have responded not knowing they got better. The case that otitis media or chronic nasal inflammation had restored was 13.0 percent respectively, but 18.5 percent had responded their ailment was not knowing their improvement so well that ailed before operation. The sequela by aftermath of the tonsillectomy, seeing collectively, it appeared 16.7 percent of the person was responded they had sequela and the idea of operational result, 90.7 percent responded they had favoured their operation, and 3.7 percent regret their carelessness. As above mentioned, it is advisable to be operated by the degree of its symptoms and there is any complication existed or in case of absolutely necessary case.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.3
• /
• pp.347-360
• /
• 1993

The project was undertaken to provide information on the present system of traditional pig farming in the South Pacific region, to identify the problems currently limiting productivity of such pigs and to offer practical strategies which could be used for increasing productivity of the animals. The problems were identified by surveying some 220 subsistence pig farms in eleven island countries in the South Pacific region using a prepared questionnaire. The units were found to be generally small, consisting of about 2-4 sows per herd. The productivity of the units as assessed in terms of sow reproductive efficiency was rather low, being only about 7.5. Feed, housing, breeding, disease, marketing, lack of capital, technical know-how and existing social traditions were identified as current constraints. Based on three of the most limiting factors identified namely feed, housing and breeding, strategies for improvement were developed on the basis of better and more effective use of locally available feed resources, better housing and genetic improvement through crossbreeding programmes. These improvement strategies were tested as a package model on some ten farms in two of the island countries. The results of these on-farm trials indicated that using the improvement strategies increased sow reproductive efficiency by approximately 60 percent, to nearly 12. The significance of these findings in the overall management of traditionally raised pigs in the South Pacific region is discussed.

• Quality Improvement in Health Care
• /
• v.2 no.2
• /
• pp.130-145
• /
• 1996

Purpose : the management of University Hospital is being challenged in maintenance of reasonable level of income and high ranked reputation by domestic competition with each other and emergence of enterprised owned hospitals. It is imperative that University Hospitals have to make management for patient satisfaction. Furthermore, increased patient's requirement for qualified hospital services (quality assurance) and low-estimated service fee also repress the hospital management condition as well as medical markets open following with Urguay Connection. Due to these unforable conditions surrounding hospital management, -University Hospitals are being pressed to seek improved management strategies. To develope the strategies, we need to have basic understanding about the problems on hospital management and detail information for various patient's requirement. Methods: For this study, we have analysed out-patients from five different University Hospitals located in Seoul, Korea. To obtain the data, we have carried out personal interviews with patients who patients who visit the Out-Patient Clinics of five different University Hospitals using a previously prepared questionnaire. Result: Around 65.7 percent of the visits to University Hospitals were indwelt in the vicinity of 1 hour and motuvation of visiting University Hospital was expending high wuality medical csre in 49.3 percent. The 79.3 percent of the patients have experienced inconvenience during medical care in University Hospital. The most inconvenient condition was waiting for doctors. The 57.2 percent of total patient have experienced rudness. The most rudness condition was registration and receipt desk in 44.4 percent. Patient expect that doctors working in University Hospitals as professors have high and updated medical knowledge(50.4%) and University Hospitals have a high quality medical care system(79.4%). The patient satisfaction was relatively low in 61.1 percent of total patient and revealed high frequency of again visit University Hospital in satisfaction group. Comparison of interhospital analytical study showed quite difference on various problems. Conclusion: Almost patients who visit to Out-Patient Clinic of University Hospital havevisiting motivation to high quality medical care. University Hospitals have several different unsatisfactorial factors and revealed different degree of patient satisfaction. In a future day, University Hospitals have to make use of another University Hospital's merits for approach of Benchmarking and also should be studied decision factors of patient satisfaction and interhospital difference of them.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.5
• /
• pp.659-670
• /
• 2011

Objectives : The purpose of this study was to examine the state of oral health care among special school personnels in an attempt to provide some information on the improvement of the oral health care of students with disabilities who would be under the first hand influence of school personnels. Methods : The subjects in this study were personnels who were selected by random selection in five different special schools located in the city of Jeonju, North Jeolla Province. A self-administered survey was conducted in person from July 5 to 14 after the purpose of this study was explained. Results : 1. Concerning their general characteristics, the level of oral health knowledge was high in the personnel whose career is 5 years more, and the younger personnels had a better oral health knowledge, and the men were more knowledgeable than the women. 2. As to oral health education experience, the rate of the respondents who ever received oral health education stood at 35.3 percent. In relation to the frequency of oral health education, the biggest group that accounted for 58.2 percent received that education once. As for the route of education, the largest group that represented 52.7 percent received that education at dental hospitals or clinics. In relation to satisfaction with oral health education, the greatest group that accounted for 38.5 percent were dissatisfied with that education. 3. As for an intention of receiving oral health education in the future, the biggest group that accounted for 60.9 percent intended to receive that education if they would have free time, and the largest group that represented 47.7 percent believed that oral health education should be conducted by dental hygienists. 4. Concerning their general characteristics, the level of oral health promotion behavior according to age in both bushing and supplies of oral health care was high in forties-1.89 point and 3.33 point, and that in regular visit to a dental clinic was the highest in twenties for 2.58 point, and that in dietary control was the highest in twenties for 2.59 point. 5. Their oral health knowledge had a significant positive correlation to their toothbrushing, regular dental clinic visit and dietary control that were the subfactors of oral health promotion behavior. 6. As for the impact of oral health promotion behavior on oral health knowledge, toothbrushing exerted the greatest influence on that(${\beta}$=0.306, p<0.001). Conclusions : Appropriate institutional measures should be taken to let dental hygienists who are expert in oral health care provide incremental oral health care for students and adults with disabilities in educational institutions and facilities for the disabled, and the development of oral health education programs is urgently required to offer systematic oral health education for not only students with disabilities but their teachers and guardians.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.279-285
• /
• 1998

This study investigated human error characteristics of the 42 fatal industrial accidents reported by staff members of Korea Industrial Safety Corporation. Various types of human error were judged to be primary contributing factors in about 74 percent of the cases. Most of human error made by involved industrial operators resulted from two types of mistakes: (1) mistake in judgement of work situation, and (2) omission in daily check. It was concluded that preparation/observance for work procedure manuals, danger predication training and enforcement/Education of daily check routine would be effective preventive tools for these types of human error attributable to fatal industrial accidents.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.441-444
• /
• 1989

This correspondence presents a recursive estimation algorithm which, unlike conventional ones; updates the estimates only when a sufficient improvement can be obtained with a bounded noise assumption, the resulting sequence of estimates is a sequence of convex sets(ellipsoids) in the parameter space. For the cases studied, the algorithm use less than 20 percent of the. data to update, the estimate and still acquired good accuracy for spectral estimation.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1025-1026
• /
• 2008

The level crossing collision accident which comprises more than 90 percent of all level crossing accidents is one of the most serious safety problems. There is a critical need for providing safe strategy and is focusing on the level crossing information rather than measures at a grade crossing. This study is intended to develop technology for accident prevention and damage reduction based on accident cases analysis result and improvement direction to complement shortcomings of safety equipment of conventional level crossing and to establish safety of travelers(train, motor vehicle, person).

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3293-3301
• /
• 1974

An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.