• 한국화재소방학회논문지
• /
• 제20권4호
• /
• pp.98-104
• /
• 2006

원자력발전소 화재방호 규정에서 방화벽 관통부는 방화벽과 동등한 내화성능을 갖는 구조로 시공할 것을 요구하고 있다. 화재방호 규정이 제정되기 이전에 설계되어 방화벽 관통부 내화성능 인증되지 않은 'K' 원자력발전소에 대해서 내화성능을 평가하였다. 내화성능 평가는 육안점검에 의한 방법과 시공된 관통부 데이터와 시험체 데이터를 비교하여 판단하는 한계접근법을 적용하였다. 내화성능 평가 결과, 전체 관통부의 50%에 해당하는 관통부가 성능기준에 미달하는 것으로 나타났다. 본 연구에서는 성능평가 결과와 더불어 관통부 내화성능을 확보하기 위한 설비 개선, 유지관리 방안 등을 제시하였다. 본 연구는 가동중인 발전소를 대상으로 한 실증평가로서 본 연구에서 적용한 평가방법, 연구결과 등은 향후 타원전의 관통부 성능평가에 유용하게 활용될 것으로 기대된다.

• Tribology and Lubricants
• /
• 제24권6호
• /
• pp.291-296
• /
• 2008

In order to improve the leakage prediction and rotordynamic analysis of an annular seal with a smooth rotor and circumferentially grooved stator, CFD analysis using FLUENT has been performed to determine the groove penetration angle a which is the angle of separation line between control volumes II and III in groove section of Ha and Lee's three-control-volume theory. Validation to the present analysis using new penetration angle determined by the CFD analysis is achieved by comparisons with the results of published Ha and Lee's analysis. For the leakage prediction the present analysis shows slight improvement and CFD results yields the best. Direct damping and cross-coupled stiffness coefficients are predicted better to the experimental ones. However, direct stiffness coefficient is predicted worse.

• Restorative Dentistry and Endodontics
• /
• 제11권1호
• /
• pp.27-32
• /
• 1985

The purpose of this study was to examine the influence of canal irrigants and smear layer on the property of apical seal. Fourty-five canals from human teeth were randomly selected and divided into 5 groups according to the irrigants used in conjunction with instrumentation. The irrigants were RC-prep in combination with Naocl, Citric acid, Naocl, Naocl in combination with $H_2O_2$, and normal saline solution. After instrumention and dry the canal with paper point, the canals were obturated by lateral condensation of Zinc-oxide eugenol sealer and gutta percha cone. All the specimens were immersed in 2% methylene blue dye solution for 7 days and the depth of dye penetration into the canals was evaluated by macros cope. The following results were obtained. 1. All the canals experimented showed varying degree of dye penetration. 2. There was no significant difference in depth of dye penetration between the groups known to be effective and ineffective in the removal of the smear layer. 3. The canals irrigated with NaOCl alone showed the highest dye penetration and mean leakage was 7.7 mm. 4. In the canals irrigated with RC-prep in combination with Naocl and citric acid, the mean dye penetration was 5.5 mm and 4.8 mm respectively, and the canals irrigated with NaOCl in combination with $H_2O_2$ and normal saline solution revealed mean dye penetration of 3.9 mm.

• 연구논문집
• /
• 통권26호
• /
• pp.25-32
• /
• 1996

Water seals are used in a washing machine to seal rotating shafts and to prevent the penetration of dust, dirt or water from the outside. The design parameters of water seals, that were the location of the garter spring, the angle of the seal lip, and the interference, were investigated by the computer simulations using the hyperelastic non-linear large deformation finite element analysis code. The maximum contact stress and the distribution of stress on the seal lip were obtained for various type of water seals. The best type among the several investigated seals was selected considering the contact force and the sealing performance.

• Restorative Dentistry and Endodontics
• /
• 제13권1호
• /
• pp.151-158
• /
• 1988

The purpose of this study was to evaluate the effect of canal filling methods and post-space preparation time on the apical seal of endodontically treated teeth. Seventy-six single-rooted human teeth were divided into 6 groups and each tooth was obturated and prepared post-space according to the purpose of this study. After all specimens were immersed in Indian ink, decalcified and cleared, the degree of dye penetration into the root canals observed by magnifying glass (X20) and measured by caliper. The results were as follows: 1. In the thermatic condensation, no significant difference in ink penetration occured when the post-spaces were created immediately after obturation or when they were made a week later. 2. In the lateral condensation, no significant difference in ink penetration existed between teeth whose post-space were prepared immediately or delayed. 3. In comparison of experimental groups and control groups, no significant difference showed when the groups were obturated with McSpadden compactor but when the teeth were laterally condensed, the experimental groups showed less ink penetration than controls. 4. Thermatic condensed teeth with McSpadden compactor were less ink penetration thn laterally condensed teeth.

• 한국화재소방학회논문지
• /
• 제18권4호
• /
• pp.93-102
• /
• 2004

원자력발전소에서 방화벽 관통부 내화충전구조는 화재가 발생장소 이외의 구역으로 전파되는 것을 차단하여 타구역에 설치된 안전에 중요한 기기를 보호하는 중요한 구성요소이다. 그러나 국내 장기 가동중 원전의 경우 관통부 충전구조의 내화성능을 입증하는 인증시험서가 구비되어 있지 않아 별도의 내화성능평가가 이루어져야 하고, 성능평가 결과가 적정 내화등급을 만족하지 못하는 관통부에 대해서는 관통물질의 재배치 둥의 구조변경이 이루어져야 한다 본 연구는 분석적인 방법에 의한 관통부 충전구조의 내화성능 평가기법을 정립하고. 분석적인 방법을 적용하여 실제 발전소에 설치된 관통부 충전구조의 내화등급을 결정하는 방법을 제시하였다. 이를 통하여 분석에 의한 관통부 충전구조의 내화성능평가방법은 내화인증시험서가 없는 국내 장기가동 원자력발전소에 효율적으로 적용될 수 있을 것으로 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제41권2호
• /
• pp.114-120
• /
• 2016

Objectives: The aim of this study was to compare the push-out bond strength and dentinal tubule penetration of root canal sealers used with coated core materials and conventional gutta-percha. Materials and Methods: A total of 72 single-rooted human mandibular incisors were instrumented with NiTi rotary files with irrigation of 2.5% NaOCl. The smear layer was removed with 17% ethylenediaminetetraacetic acid (EDTA). Specimens were assigned into four groups according to the obturation system: Group 1, EndoRez (Ultradent Product Inc.); Group 2, Activ GP (Brasseler); Group 3, SmartSeal (DFRP Ltd. Villa Farm); Group 4, AH 26 (Dentsply de Trey)/gutta-percha (GP). For push-out bond strength measurement, two horizontal slices were obtained from each specimen (n = 20). To compare dentinal tubule penetration, remaining 32 roots assigned to 4 groups as above were obturated with 0.1% Rhodamine B labeled sealers. One horizontal slice was obtained from the middle third of each specimen (n = 8) and scanned under confocal laser scanning electron microscope. Tubule penetration area, depth, and percentage were measured. Kruskall-Wallis test was used for statistical analysis. Results: EndoRez showed significantly lower push-out bond strength than the others (p < 0.05). No significant difference was found amongst the groups in terms of percentage of sealer penetration. SmartSeal showed the least penetration than the others (p < 0.05). Conclusions: The bond strength and sealer penetration of resin-and glass ionomer-based sealers used with coated core was not superior to resin-based sealer used with conventional GP. Dentinal tubule penetration has limited effect on bond strength. The use of conventional GP with sealer seems to be sufficient in terms of push-out bond strength.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2004년도 추계학술논문발표회 논문집
• /
• pp.70-75
• /
• 2004

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2003년도 추계학술논문발표회논문집
• /
• pp.415-421
• /
• 2003

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.408-415
• /
• 1999

수산화칼슘은 높은 항균성으로 인해 최근에 근관소독제로 사용이 추천되고 있는 약제이다. 본 연구자는 근관내에 수산화칼슘을 투약한 후에 산화아연유지놀계 시멘트로 근관 충전을 하는 경우 근관시멘트의 물성의 변화를 경험할 수 있었다. 본 연구의 목적은 수산화칼슘을 근관내에 투약 후 근관충전재로 산화아연유지놀계 시멘트를 사용하는 경우 발생하는 근관시멘트의 물성변화를 알아보기 위함이다. 이를 위하여 수산화칼슘-유지놀 화합물의 불성 중 용해도, 흡수성, 피막도 및 변연폐쇄성을 기성 산화아연유지놀계 근관 시멘트인 Tubli-seal$^{(R)}$과 비교하여 연구하였다. 용해도와 흡수생의 측정을 위하여 ADAS No. 57에 따라 지름 20mm 두께 15mm인 시편을 제작하여 $37^{\circ}C$ 50ml의 증류수에 7일간 침잠후 무게의 변화를 측정하였고, 피막도 측정을 위하여 ADAS No. 57에 따라 두 유리판 사이에 실험물질을 위치시키고 15 Kg의 하중을 가한 후에 두께의 증가를 측정하였다. 마지막으로 변연폐쇄성 측정을 위해서는 우치 상아질 면과 아크릴 봉 사이에 실험물질을 위치시킨 후 3일 동안 Pelican ink에 침잠시킨 후 색소의 침투 면적을 계산하여 다음과 같은 결과를 얻었다. ${\cdot}$ 수산화칼슘-유지놀 화합물의 흡수성은 59.72${\pm}$17.75%로 측정되어 3.15${\pm}$0.76%로 측정된 Tubli-seal$^{(R)}$에 비해 유의하게 높게 나타났다(p<0.05). ${\cdot}$ 수산화칼슘-유지놀 화합물의 용해도가 20.98${\pm}$2.94%로 측정되어 2.52${\pm}$0.49%로 측정된 Tubli-seal$^{(R)}$에 비해 유의하게 높게 나타났다(p<0.05). ${\cdot}$ 수산화칼슘-유지놀 화합물의 피막도가 0.36${\pm}$0.03 mm로 측정되어 0.12${\pm}$0.01mm로 측정된 Tubli-seal$^{(R)}$에 비해 유의하게 높게 나타났다(p<0.05). ${\cdot}$ 수산화칼슘-유지놀 화합물의 미세누출은 3일 동안의 색소 침투면적이 57.63${\pm}$25.85%로 측정되어 28.05${\pm}$23.46%로 측정 된 Tubli-seal$^{(R)}$에 비해 유의하게 높게 나타났다(p<0.05).