• 대한소아치과학회지
• /
• 제46권3호
• /
• pp.265-273
• /
• 2019

이 연구는 레진침투법(resin infiltration, RI)을 적용하기 적합한 초기 유아기 우식증 병소를 동정하는데 있어 레이저 형광법(laser fluorescence, LF)의 활용 가능성을 평가하기 위해 수행되었다. 인접면 우식을 가진 20개의 자연 탈락 유구치를 이용, 중심와를 지나도록 협설로 절단하여 근원심 치면을 별개의 시편으로 간주하였다. ICDAS code 1과 2에 해당하는 시편 27개를 선별하였고 LF값을 측정하였다. 현미경 평가를 위해 RI 시행 시 이중 염색을 병행하였고, 절편을 제작하였다. 현미경 영상으로부터 병소깊이(최대 탈회깊이, $LD_{max}$), 최대 침투깊이($PD_{max}$), 평균 레진 침투율(Penetration rate, PR)을 측정하고, 상관분석을 시행하였다. LF값은 PR과 양의 상관관계를 보였으나 $LD_{max}$ 및 $PD_{max}$와는 유의성을 보이지 않았다. 얕은 법랑질 우식군을 제외하고, 깊은 법랑질 우식군과 상아질 우식군에서는 LF값과 PR 간에 유의한 상관관계가 확인되었다. 활동성 우식은 RI를 적용할 경우 침투율이 높고, LF 값이 보다 높게 측정될 수 있다. 진행 정도가 유사한 우식병소의 활성도를 평가하고자 할 경우, 레이저 형광법이 유용할 것으로 사료되었다.

• 한국가구학회지
• /
• 제18권4호
• /
• pp.261-267
• /
• 2007

This report describes the wood anatomy and 1% safranine solution penetration depth in radial and longitudinal directions of Anthocephalus chinensis belonging to the family Rubiaceae native to Bangladesh. The wood of this species was mostly characterized by diffuse porous, vessel with simple perforation plate, vestured alternate intervessel pittings, relatively medium vessel elements and fiber, and nonseptate fiber with distinctly bordered pits at radial wall. The body ray cell was procumbent with 2 to over 4 rows of upright and square marginal cells. Sometimes, the rays with procumbent, square and upright cells were mixed. Latewood fiber was thin to thick walled while it was very thin walled in earlywood. Axial parenchyma was diffuse, vasicentric, 5-8 cells per parenchyma strand dominantly present. Liquid penetration depth was observed in radial and longitudinal directions at moisture level of 7.42%. Longitudinal penetration was found 6.3 times higher than radial penetration. The initial penetration rate of safranine solution was high, but gradually decreased during the course of time. Different anatomical features were found to be responsible for the variation of safranine solution penetration depth compared to Gmelina arborea.

• 한국레이저가공학회지
• /
• 제4권2호
• /
• pp.1-12
• /
• 2001

This study has been performed to evaluate basic characteristics of CW-CO$_2$ laser welding process of A5083 and A7N01 Al alloy. The effect of welding parameters, such as shielding gas, gas flow rate, laser power and welding speed on the bead shape and porosity from bead on plate welding tests have been investigated. Welds shielded by He gas had deeper penetration and better bead shape than those shielded by Ar. The penetration depth was augmented with the increase of laser Power and the decrease of welding speed. Welds of A7N01 alloy had deeper penetration than those of A5083 alloy In beads of A5083 alloy which has deeper penetration, the volume fraction of porosities was high due to the number of its was few, but size of its was larger. The case of deeper penetration beads of A7N01 alloy, the porosity reduced under relatively higher power The Volume fraction of porosities in weld of A5083 alloy was significantly higher than that in weld of A7N01 alloy.

• 한국지반공학회논문집
• /
• 제23권3호
• /
• pp.133-140
• /
• 2007

DCM공법(심층혼합처리 공법)은 흙막이 벽체 등 구조물 조성에 적용하였다. 이러한 DCM 벽체는 경질층에서 관입능력이 있어야 한다. DCM 장비에 부착된 교반날개에 의해 경질지반의 관입능력이 증가되는 알아보기 위해 특수교반날개가 고안되었다. 경질점토층에 관입되는 특수교반날개의 관입특성은 김해와 인천현장에서 조사하였다. 고안한 특수교반날개는 관입속도가 다소 느려도 N=30 이상 되는 지반까지 관입되었고 관입시 효율이 경질지반에서 낮아질 수 있으므로 경제적인 교반날개의 관입깊이를 분석하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 연약지반처리위원회 학술세미나
• /
• pp.59-70
• /
• 2000

본 연구에서는 콘관입속도가 콘관입시험 결과에 미치는 영향을 연구하기 위하여 LSU/CALCHAS(Louisiana State University Calibration Chamber System)를 이용한 미니 Piezocone의 관입시험이 수행되었으며 그 결과를 비교 분석하였다. 10회의 미니 Piezocone 관입시험이 Ko 조건에서 수행되었으며 33% kaolin, 67% sand mixture가 시료로 사용되었고, 콘관입속도 0.3, 0.6cm/sec, U1(filter element at the cone tip), U2(filter element above the cone base), OCR=1, 10 의 조건이 다양하게 적용되었다. 시험결과 Cone Resistance, Excess Pore Water Pressure, Sleeve Friction 은 U1, U2 두 종류의 콘에 대해서 모두 관입속도가 커짐에 따라 증가하였으나 OCR의 증가에 따라서는 감소하였으며 U1의 Excess Pore Water Pressure가 U2 경우보다 크게 측정되었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.956-960
• /
• 2011

The objective of this investigation was to develop nanostructured lipid carriers (NLCs) of tacrolimus by the hot homogenization technique by sonication. NLCs are commonly prepared by emulsification and lyophilization. The feasibility of fabricating tacrolimus-loaded NLCs was successfully demonstrated in this study. The developed NLCs were characterized in terms of their particle size, zeta potential, entrapment efficiency (EE) of tacrolimus, and morphology. Studies were conducted to evaluate the effectiveness of the NLCs in improving the penetration rate through hairless mouse skin. Tacrolimus-loaded NLCs were found to have an average size of $123.4{\pm}0.3\;nm$, a zeta potential of $-24.3{\pm}6.2\;mV$, and an EE of 50%. In vitro penetration tests revealed that the tacrolimus-loaded NLCs have a penetration rate that is 1.64 times that of the commercial tacrolimus ointment, Protopic$^{(R)}$.

• Reproductive and Developmental Biology
• /
• 제34권1호
• /
• pp.21-25
• /
• 2010

The purpose of this study was to investigate the effects of the collection time, co-culture and sperm penetration of canine oocytes on in vitro maturation and fertilization. The oocytes were cultured in TCM-199 media containing hormonal supplements (10% FCS, 10 IU/ml HCG, 10 IU/ml PMSG) at 5% $CO_2$, 95% air, $38^{\circ}C$. The in vitro maturation rate to MII stage of in vitro oocytes recovered from ovaries that collected at follicular, luteal and inactive phases of the reproductive phase for 44~72 hrs were 19.2%, 12.2%, and 6.0%, respectively. Follicular phases oocytes had a significantly higher in vitro maturation rate than oocytes collected at luteal and anestrus stage (p<0.05). The in vitro maturation rates to the MII stage of canine oocytes after 48 hrs of culture with glutathione, pyruvate, or glutathione + pyruvate were 12.5%, 10.7%, and 17.5%, respectively. This was higher than that in both alone or the combination of the two compared to the control group (19.0%). The sperm penetration rates of in vitro matured oocytes by fresh and frozen semen were 29/80 (36.3%) and 18/80 (22.5%), respectively. Although there are limited reports about canine oocytes co-culture and in vitro fertilization, our results on in vitro maturation is comparable to the results from other researches.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.859-864
• /
• 2015

This paper analyzes the impact of Plug-in Electric vehicles(PEVs) on power demand and voltage change when PEVs are connected to the domestic distribution system. Specifically, it assesses PEVs charging load by charging method in accordance with PEVs penetration scenarios, its percentage of total load, and voltage range under load conditions. Concretely, we develop EMTDC modelling to perform a voltage distribution analysis when the PEVs charging system by their charging scenario was connected to the distribution system under the load condition. Furthermore we present evaluation algorithm to determine whether it is possible to adjust it such that it is in the allowed range by applying ULTC when the voltage change rate by PEVs charging scenario exceed its allowed range. Also, detailed analysis of the impact of PEVs on power distribution system was carried out by calculating existing electric power load and additional PEVs charge load by each scenario on new-town in Korea to estimate total load increases, and also by interpreting the subsequent voltage range for system circuits and demonstrating conditions for countermeasures. It was concluded that total loads including PEVs charging load on new-town distribution system in Korea by PEVs penetration scenario increase significantly, and the voltage range when considering ULTC, is allowable in terms of voltage tolerance range up to a PEVs penetration of 20% by scenario. Finally, we propose the charging capacity of PEVs that can delay the reinforcement of power distribution system while satisfying the permitted voltage change rate conditions when PEVs charging load is connected to the power distribution system by their charging penetration scenario.

• Geomechanics and Engineering
• /
• 제18권3호
• /
• pp.259-266
• /
• 2019

This paper presents a comparison between experimental measurements and numerical estimations of penetration length of a cement grout injected in discrete joints. In the experiment, a joint was generated by planar acryl plates with a certain separation distance (; aperture) and was designed in such a way to vary the separation distances. Since a cement grout was used, the grout viscosity can be varied by controlling water-cement (W/C) ratios. Throughout these experiments, the influence of joint aperture, cement grout viscosity, and injection rate on a penetration length in a discrete joint was investigated. During the experiments, we also measured the time-dependent variation of grout viscosity due to a hardening process. The time-dependent viscosity was included in our numerical simulations as a function of elapsed time to demonstrate its impact on the estimation of penetration length. In the numerical simulations, Bingham fluid model that has been known to be applicable to a viscous cement material, was employed. We showed that the estimations by the current numerical approach were well comparable to the experimental measurements only in limited conditions of lower injection rates and smaller joint apertures. The difference between two approaches resulted from the facts that material separation (; bleeding) of cement grout, which was noticeable in higher injection rate and there could be a significant surface friction between the grout and joint planes, which are not included in the numerical simulations. Our numerical simulation, meanwhile, could well demonstrate that penetration length can be significantly over-estimated without considering a time-dependency of viscosity in a cement grout.

• 터널과지하공간
• /
• 제19권6호
• /
• pp.479-489
• /
• 2009

터널 굴착시 굴진면 전방의 지반상태를 사전에 파악하는 것은 터널의 안정성을 증가시킴과 동시에 시공성을 향상시켜 경제적인 터널 시공을 할 수 있도록 한다. 이에 본 연구에서는 터널 천공시 획득되는 천공데이터를 이용하여 굴진면 전방의 암반강도를 예측하고자 하였다. 이는 암반강도가 현장에서 암반분류 및 지보패턴 설계 등의 핵심인자로 가장 보편적으로 활용될 뿐만 아니라, 암반강도의 변화를 통해 굴진면 전방의 지반상태 변화를 예측하는데도 활용할 수 있기 때문이다. 이를 위해 본 연구에서는 다양한 강도 특성을 보이는 균질한 암석시험편을 대상으로 착암기 종류를 변화시켜가며 천공실험을 수행하였다. 실험결과 천공속도는 다른 천공데이터들과 착암기의 종류 및 암석의 강도에 따라 고유한 값을 보이는 것으로 나타났다. 또한, 동일한 암석에 대해 천공시 타격압이 증가하면 천공속도는 선형적으로 비례하여 증가하는 것으로 나타났다. 이러한 결과를 바탕으로 본 연구에서는 터널 시공 현장에서 착암기의 제원, 현장 계측 데이터 및 천공속도와 암반강도의 상관관계를 이용하여 터널 굴진면 전방의 암반강도를 예측할 수 있는 방안을 제안하였다.