• 한국작물학회지
• /
• 제36권1호
• /
• pp.12-16
• /
• 1991

보리의 월동전 초형에 따른 농업형질의 차이를 비교하고저 같은 교배조합에서 선발, 고정시킨 계통 및 교배친 10개를 공시하여 분석한 결과는 다음과 같다. 1. 포복형에 비해서 직립형 계통은 출수기 및 성숙기가 빠르고, 간장은 컸으나 $m^2$당 수수, 수량성은 적었다. 또한 천입중, 정입률, 광투과율은 컸다. 2. 출수기는 성숙기, 수량과 정상관, 간장, 천입중, 정입률, 광투과율과 부상관이 있었다. 수량은 광투과율과 부상관이 인정되었다. 3. 월동전에 초형이 포복형이면서, 월동후 생육재생기가 빠르고 식간신장이 빠른 계통을 육성, 선발하는 것이 특히 내한성이 요구되는 지역에서 유리할 것으로 생각된다.

• Environmental Analysis Health and Toxicology
• /
• 제19권2호
• /
• pp.177-182
• /
• 2004

Alcohol consumption and exposure to endocrine disruptors and industrial solvents have been implicated in impaired spermatogenesis, increase in the incidence of malformed sperm and decrease in the percentage of moving sperm. The aim of this study was to determine and compare the direct effects of some organic solvents(bisphenol A; BPA, dibutyl phthalate; DBP, formaldehyde; HCHO, dimethylsulphoxide; DMSO, ethanol) on mucus penetration distance, motility and survival rate of human sperm in vitro. Semen samples from 3 health subjects were prepared using swim-up method and 0.0005-0.5% organic solvents were added to the test medium. BPA, DBP, HCHO and DMSO produced significant decreases in the motility and survival rate with a different potency. The most potent inhibition of mucus penetration distance, motility and survival rate was observed after exposure to HCHO. A concentration of 0.0005% HCHO significantly inhibited sperm motility. When ethanol m.: added directly to sperm, at concentrations equivalent to that in serum after heavy drinking, these damaging effects were lowest compared with other solvents. Present study shows that each compound has different toxic potency to human sperm and we need special caution for the use of HCHO.

• Structural Engineering and Mechanics
• /
• 제44권6호
• /
• pp.801-814
• /
• 2012

The strain rate effects on the interaction between a Mode I matrix crack and an inclined elliptic matrix-inclusion interface under dynamic tensile loadings were investigated numerically, and the results are in agreement with previous experimental data. It is found, for a given material system, that there are the first and the second critical strain rates, by which three kinds of the subsequent crack growth patterns can be classified in turn with the increasing strain rate, namely, the crack deflection, the double crack mode and the perpendicular crack penetration. Moreover, such a crack deflection/penetration behavior is found to be dependent on the relative interfacial strength, the inclined angle and the inclusion size. In addition, it is shown that the so-called strain rate effect on the dynamic strength of granule composites can be induced directly from the structural dynamic response of materials, not be entirely an intrinsic material property.

• 한국전산구조공학회논문집
• /
• 제32권2호
• /
• pp.133-140
• /
• 2019

본 논문은 Shaped charge jet(SCJ)의 관통 과정을 유한요소해석을 통해 모사하여 제트 입사속도, 관통률 그리고 관통량 증분과 같은 물리량들을 획득하였다. 이 물리량들을 hydrodynamic 이론에 적용하여 입사 제트 속도의 효율을 분석한 결과, 입사 속도가 빠른 제트의 관통 효율은 이어지는 느린 제트에 비해 높은 것을 확인하였다. 이 효율은 hydrodynamic limit(HL) 미만인 제트인 경우 큰 폭으로 감소하였다. 한편, 시간에 따른 관통량 증분과 제트 소모량의 비교는 SCJ의 이론적인 관통현상 분석을 위해서는 길이 연장 효과를 고려해야함을 보였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.559-566
• /
• 2000

본 연구에서는 비등방성 응력조건 하에서 콘 관입속도가 콘 관입시험 결과에 미치는 영향을 연구하기 위하여 유한요소해석 및 Calibration Chamber를 이용한 Miniature Piezocone의 관입시험이 수행되었으며 그 결과를 비교 분석하였다. 비등방성을 고려하기 위하여 Anisotropic Soil Model이 유한요소해석에 이용되었으며 LSU/CALCHAS(Louisiana State University Calibration Chamber System)가 Miniature Piezocone의 관입시험에 이용되었다. 콘 관입속도의 영향이외에도 OCR 및 필터위치의 영향을 고찰하였다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권5호
• /
• pp.352-358
• /
• 2001

Because algal cells are so efficient at absorbing incoming light energy, providing more light energy to photobioreactors would simply decrease energy conversion efficiency. Furthermore, the algal biomass productivity in photobioreactor is always proportional to the total photosynthetic rate. In order to optimize the productivity of algal photobioreactors (PBRs), the oxygen production rate should be estimated. Based on a simple model of light penetration depth and algal photosynthesis, the oxygen production rate in high-density microalgal cultures could be calculated. The estimated values and profiles of oxygen production rate by this model were found to be in accordance with the experimental data. Optimal parameters for PBR operations were also calculated using the model.

• Toxicological Research
• /
• 제17권4호
• /
• pp.317-323
• /
• 2001

The skin penetration rate of methidathion in vitro and pharmacokinetics of methidathion in vivo were studied with male Sprague-Dawley rats by dermal treatment. The in vitro skin penetration rates for Sprague-Dawley rats of methidathion technical (50 mg, 100 ${mu}ell$) and emulsifable concentrate (EC,40mg, 100${mu}ell$) were determined as 18.4 $\mu\textrm{g}$/c $m^2$/h (RSD : 6.5) and 18.5 $\mu\textrm{g}$/c $m^2$/h (RSD : 3.2), respectively. Dose-related systemic exposure (AUC) was observed in rats after dermal treatment. The corresponding AUC, $T_{max}$, $C_{max}$, and $T_{1}$2/ of methidathion in plasma were 1.5$\mu\textrm{g}$.hr/ml, 6 h, 0.10 $\mu\textrm{g}$/ml, and 16 h, for 116mg/kg doses, 3.2 $\mu\textrm{g}$. hr/ml, 8 h, 0.12 $\mu\textrm{g}$/ml, and 23 h, for 232 mg/kg doses and 10 $\mu\textrm{g}$. hr/ml, 12 h, 0.32 $\mu\textrm{g}$/ml, and 20 h, for 1,160 mg/kg doses respectively. The urinary excretion of methidathion, estimated wing an equation derived from the in vitro skin penetration study was 0.24~0.35% of the absorbed dose. The concentration of methidathion in kidney was higher than that in liver. Dose-dependent absorption and excretion of methidathion without saturation was observed under in vivo experimental condition.n.n.

• 한국세라믹학회지
• /
• 제17권4호
• /
• pp.188-196
• /
• 1980

To investigate the corrosion behavior of the clay-bonded kaolin chamotte by molten aluminum, the mixture of 20 wt% fire clay and 80 wt% kaolin chamotte was prepared and fired in the temperature range 900~120$0^{\circ}C$. The specimens fired at each temperature were reacted with molten aluminum at 90$0^{\circ}C$. The results obtained in this experiment are as followed. 1) It was confirmed through X-ray diffraction analysis that the clay-bonded kaolin chamotte exposed to molten aluminum suffered penetration by the reaction of aluminum with silica forming alumina and metallic silicon. 2) Penetration was independent whether the silica existed as free or one component of mullite. 3) Penetration of the specimen fired at 90$0^{\circ}C$ was negligible while the others fired above 100$0^{\circ}C$ showed remarkable penetration. 4) Penetration rate at 90$0^{\circ}C$ was parabolically increased with the holding time as in the case of metal oxidation.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.215-221
• /
• 2022

In this study, high-penetration asphalt with low greenhouse gas emissions was used in the asphalt mixing process to reduce the carbon emissions during the reaction due to its capacity to be produced even at low temperatures. In effect, cationic, anionic, and non-ionic dispersants were added and mixed in different feeding ratios, seeking an effective dispersion of the modifiers (SIS, PS, TPEE, and SEBS) into the high-penetration asphalt matrix and forming an asphalt binder with a melting point of 120 ℃. The compatibility of the modifiers and the high-penetration asphalt was examined using SEM and DSC techniques, and the role of NDP-1 as a dispersant was carefully investigated with respect to dissolution time. The analyses showed that: (1) the dispersibility of the asphalt binder is good when the non-ionic dispersant is used; (2) as the concentration of the non-ionic dispersant increases, the dissolution time decreases and the domain size contracts; (3) the ND70-PS has the shortest dissolution time, the lowest agglomeration rate, and a single Tg value.

• 터널과지하공간
• /
• 제10권4호
• /
• pp.526-532
• /
• 2000

전단면터널 굴착장비에 의한 터널굴착을 설계할 때 일반적으로 적용되는 암반의 강도는 80-250 MPa로 알려져 있으나 설계단계에서 암반의 특성을 완전히 파악하지 못한 채 설계하고 수행하는 경우가 있다. 본 연구는 60% 이상 구간의 단축압축강도가 260 MPa이상이며, RMR값이 70이상의 암반에서 TBM으로 굴착된 약 5.3km 연장의 밀양댐계통 광역상수도 도수로터널 TBM 굴착구간의 암반특성을 규명하고 이로써 이론적 굴착속도를 분석하여, 실제의 순굴착속도와 비교분석한 것이다. 노르웨이 NTH에 의하여 제안된 이론적 굴착속도는 현장에서 수행된 순굴착속도의 평균값과 2∼20%의 오차를 갖는 것으로 평가되어, 극경암에서의 굴착속도 설계는 일본이나 미국에서 제안된 해석법에 비하여 NTH해석법이 가장 접근된 설계방법이라 할 수 있다. 현지암반을 펑가하여 순굴착속도와의 상관관계를 규명한 결과, 극경암에서의 순굴착속도는 슈미트 해머에 의한 반발경도와 RMR 값에 반비례하는 것으로 나타났는데, 이의 상관계수는 각각 0.705 및 0.777이었다. 이로써 반발경도와 RMR의 크기는 순굴착속도를 예측할 수 있는 요소가 될 수 있음을 알 수 있다. 또한 극경암에서의 순굴착속도는 현지암반의 지압의 크기에 크게 영향을 받고 있는 것으로 평가되어 TBM 굴착설계에서 지압상태는 중요한 설계요소의 하나로서 고려되어야 할 것이다.