• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.376-385
• /
• 2002

Spray impingement and fuel film formation models with cavitation have been developed and incorporated into the computational fluid dynamics code, STAR-CD. The spray/wall interaction process was modeled by considering the effects of surface temperature conditions and fuel film formation. The behavior of fuel droplets after impingement was divided into rebound, spread and splash using the Weber number and parameter K(equation omitted). The spray impingement model accounts for mass conservation, energy conservation, and heat transfer to the impinging droplets. The fuel film formation model was developed by integrating the continuity, momentum, and energy equations along the direction of fuel film thickness. Zero dimensional cavitation model was adopted in order to consider the cavitation phenomena and to give reasonable initial conditions for spray injection. Numerical simulations of spray tip penetration, spray impingement patterns, and the mass of film-state fuel matched well with the experimental data. The spray impingement and fuel film formation models have been applied to study spray/wall impingement in high-speed direct injection diesel engines.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.475-480
• /
• 2001

The flowfield of transverse jet in a supersonic air stream subjected to shock wave turbulent boundary layer interactions is simulated numerically by Generalized Taylor Galerkin(GTG) finite element methods. Effects of turbulence are taken into account with a two-equation $(k-\varepsilon)$ model with a compressibility correction. Injection pressures and slot widths are varied in the present study. Pressure, separation extents, and penetration heights are compared with experimental data. Favorable comparisons with experimental measurements are demonstrated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1851-1856
• /
• 2008

A numerical program based on computational fluid dynamics has been developed to simulate characteristics of an EHD induction micropump. The ambiguity of boundary conditions was removed by adopting an equation formulated for electric potential as the dependent variable. The calculations show that the dependency of frequency agrees well with the experiments and the previous analysis. The instability, caused by backflows, is getting stronger as the channel depth increases, which is consistent with experiments. The present study reveals that it is due to the limit in the penetration depth which the electric field can affect. Despite the disadvantage of large channel depth, there is a certain optimal depth for the maximum flow rate.

• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.375-383
• /
• 2002

The flowfield of transverse jet in a supersonic air stream subjected to shock wave turbulent boundary layer interactions is simulated numerically by Generalized Taylor Galerkin(GTG) finite element methods. Effects of turbulence are taken into account with a two-equation (k-$\varepsilon$) model with a compressibility correction. Injection pressures and slot widths are varied in the present study. Pressure, separation extents, and penetration heights are compared with experimental data. Favorable comparisons with experimental measurements are demonstrated.

• 한국농공학회논문집
• /
• 제50권1호
• /
• pp.61-68
• /
• 2008

It is essential to analyze and classify the physical characteristics of weathered granite for engineering purposes. This paper is to suggest a physical method to determine the degree of weathering of weathered soils. A new classification method for determining the degree of weathering is suggested, based upon the results from laboratory tests including fall cone test. According to the proposed physical method using fall cone apparatus, the measured values of the samples from the same area show distinctive difference of weathering. The water content tends to increase with increasing the degree of weathering at the same penetration in fall cone test. And relationship between CWI and water content are expressed one equation in Hwaseong area and Ilsan area.

• Journal of Welding and Joining
• /
• 제16권2호
• /
• pp.40-47
• /
• 1998

In the present study, depressions of the GMA weld pool due to the impact of droplet are numerically investigated. The numerical simulation is conducted on the basis of the Navier-Stokes equation and the volume of fluid(VOF) functions. The kinetic energy of transferring droplet makes a depression of the weld pool surface. The surface active element affects the depression of the weld pool. The droplets transferred efficiently to the bottom of the weld pool, along with electromagnetic force make the finger shape penetration at the high current GMAW.

• 콘크리트학회논문집
• /
• 제17권6호
• /
• pp.1045-1051
• /
• 2005

For critical structures and application, where a given reliability must be met, it is necessary to account for uncertainties and variability in material properties, structural parameters affecting the corrosion process, in addition to the statistical and decision uncertainties. This paper presents an approach to the fuzzy arithmetic based modeling of the chloride-induced corrosion of reinforcement in concrete structures that takes into account the uncertainties in the physical models of chloride penetration into concrete and corrosion of steel reinforcement, as well as the uncertainties in the governing parameters, including concrete diffusivity, concrete cover depth, surface chloride concentration and critical chloride level for corrosion initiation. The parameters of the models are regarded as fuzzy numbers with proper membership function adapted to statistical data of the governing parameters and the fuzziness of the corrosion time is determined by the fuzzy arithmetic of interval arithmetic and extension principle

• 한국해양공학회지
• /
• 제22권3호
• /
• pp.1-7
• /
• 2008

In this study, a mathematical model for flaw with silt protector is proposed that adds a second-order energy loss term in the momentum equation. The three-dimensional numerical model was developed based on mathematical models and verified through comparison with flume test results. Loss coefficients were evaluated through the flume tests and applied to the numerical model. It was found through the investigation of various example cases that the downstream flow pattern was affected mainly by penetration of the silt curtain, not by the approach velocity, and also that the blocking effect of velocity was increased by the increase in mesh density of the silt curtain, below a certain mesh density. The blocking effect did not increase further above a certain mesh density.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.30-31
• /
• 2014

Since consists of regression equation by penetration depth prediction calculated by existing NDRC formula mainly considers properties of projectile, impact velocity, compressive strength as parameter, it is difficult to apply it to fire reinforced concrete. In this study, scabbing limit thickness was predict considering fiber reinforcement effect by local fracture of concrete was evaluated through high-velocity impact test. As a result of applying fracture reduction coefficient to NDRC, it was possible to predict scabbing limit thickness of fiber reinforced concrete similarly with actual measurement.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.103-116
• /
• 2008

본 연구에서는 시공시 현장다짐관리에 있어 단위중량을 이용하는 기존의 방법 대신 탄성계수와 같은 역학적 특성을 이용하는 새로운 다짐관리기준 정립을 위한 현장시험방법을 제시하고자 한다. 이를 위하여 시험법이 간편하며, 활용성이 증가하고 있는 동적콘관입시험인 DCPT 측정시험이 노상토의 다짐품질관리의 적용이 가능한지를 검토하였다. DCPT 시험방법이 현장에서 다짐후 설계탄성계수를 추정할 수 있는지를 확인하기 위하여 실내토조시험, 현장시험을 실시하였고, 노상층의 DCPT, CBR, 회복탄성계수간의 상관관계를 분석하였다. 또한, 문헌조사 분석을 통하여 DCPT 시험간격을 제시하였다. 실내시험결과를 분석한 결과, DCPT 관입치 (PR) 값과 CBR값 간의 상관관계식에서는 Livneh 식이 가장 부합됨을 알 수 있었고, DCPT 시험을 통한 PR값을 국내외 탄성계수 추정식을 평가한 결과, 예측 $M_R$ 탄성계수 값과 부합하는 제안식으로는 George와 Pradesh의 식이 있었으며, FWD를 이용한 $M_R$ 제안식을 비교한 결과, Cudishala의 제안삭은 예측 $M_R$ 값보다 다소 크게 산정되며, Chen의 제안식의 경우 다소 작은 값을 보이고, 건설기술연구원의 제안식은 예측 $M_R$값에 과소 평가함을 알 수 있었다. 그러나 실제 차량이 유발하는 주행속도에 따른 축차응력과 구속응력으로부터 실내 $M_R$ 시험결과를 비교분석한 결과, 건기원 제안식이 가장 적합함을 알 수 있었다. DCPT 현장시험결과를 분석한 결과, 관입지점의 입도분포에 따라 PR 값에 오차가 생길 수 있음을 알 수 있었고, 오차를 감소하기 위한 DCPT 시험간격에 대한 추천값을 제시하였다. 현장시험결과를 분석한 결과 현장 다짐도를 만족하는 노상이라 하여도 노상 재료에 따라 평균 PR 값이 다르게 나타났으며, 특히 입경이 큰 재료일수록 평균 PR 값이 작음을 알 수 있었고, 현장함수비의 경우 다짐도에 미치는 영향은 상당히 크나, DCPT 시험에 있어서 현장함수비 변화는 평균PR값에 미치는 영향이 미미함을 알수 있었다.