• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.161-166
• /
• 1982

The purpose of this study was to examine the influence of canal preparation on the property of apical seal. Seventy canals from extracted human maxillary and mandibular teeth were randomly selected and divided into two groups: conventional group and step-back group. Thirty five canals in one group were enlarged with a, conventional preparation method and thirty five canals in the other group were instrumented in a step-back method with K-file. After instrumentation sixty canals were obturated by lateral condensation of gutta percha and zinc oxide eugenol cement, and five canals in each group were not filled and used as control. All the specimens were immersed in 2% methylene blue dye solution and the depth of dye penetration into the canals were observed by macroscope at the intervals of 1 day, 2 days, and 7 days. The following results were obtained. 1. All the canals experimented showed varying degrees of dye penetration. 2. There was no significant difference between conventional method and step-back method in the depth of dye penetration and the degree of dye penetration tended to increase with time passage in both groups. 3, In conventional preparation group the mean dye penetration was 3.6mm at 1 day, 4.8mm at 2 days. and 6.5mm at 7 days. 4. In step-back prepareation group, the specimens exposed to the dye for 1 day showed mean dye penetration of 4.1mm, and the specimens immersed in the dye for 2 days and 7 days revealed mean dye penetration of 4.6mm and 6.2mm respectively.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.4
• /
• pp.1-12
• /
• 2022

Generally, the plate load test and the field density test are conducted for compaction quality control in earthwork, and then additional analysis. Recently developed that the DCPT (Dynamic Cone Penetration Test) equipment for smart compaction quality control its the system are able to get location and real-time information about worker history management. The IoT-based the DCPT system improved the time-cost in the field compared traditional test, and the functions recording and storage of the DPI (Dynamic Cone Penetration Index) were automated. This paper describes using these DCPT equipment on in-situ and compared to the standards of the DCPT, and the compaction trend had be confirmed with DPI as the field test data. As a result, the DPI of the final compaction decreased by 1.4 times compared to the initial compaction, confirming the increase in the compaction strength of the subgrade compaction layer 10 to 14 cm deep from the surface. A trend of increasing compaction strength was observed. This showed a tendency to increase the compaction strength of the target DPI proposed by MnDOT and the results of the existing plate load test, but there was a difference in the increase rate. Therefore, additional studies are needed on domestic compaction materials and laboratory conditions for target DPI and correlation studies with the plate load tests. If this is reflected, it is suggested that DCPT will be widely used as smart construction equipment in earthworks.

• Journal of Embryo Transfer
• /
• v.14 no.1
• /
• pp.9-15
• /
• 1999

This study was conducted to investigate the effect of $\alpha$-tocopherol and cysteamine with Whitten's medium in supporting the development on in vitro maturation(IVM), in vitro fertilization (IVF) and in culture(IVC) on porcine oocytes. When the immature oocytes were cultured of $\alpha$-tocopherol for 40h, the nuclear maturation rates were 39, 4, 52.5 and 54.1%, respectivley. The nuclear maturation rates of treat groups were signficantly (P<0.05) higher than those of non-treat groups. After matureation, the oocytes were inseminated in vitro in medium 199 with ejaculated spermatoza for examination of sperm penetration, polyspermy, male pronuclear(MPN) formation, and cleavage rate. Sperm penetration rates of treat higher than the control groups(P<0.05), and MPN formation rates were significantly(P<0.05) higher on treated groups (24.3~53.1%) than control groups(14.2~21.4%). After insemination, the cleavage rates at 120hr were groups higher than control groups(P<0.05).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.4
• /
• pp.278-287
• /
• 2009

Plug-in hybrid electric vehicle (PHEV) with capability of being recharged from the power-grid will reduce oil consumption. Also, the PHEV will affect the utility operations by adding additional electricity demand for charging. In this research, the power-grid impact by demand of PHEV charging is presented and the optimal charging control strategy for utility operators is proposed with simulated data. The penetration of PHEV is assumed to be 50% in the circumstances of Korean passenger car market and Korean power-grid market limitedly. To obtain smooth load shape and utilize the surplus electricity in power-grid at midnight and dawn, the peak of charging demand should be controlled to be located before 4:00 a.m., and the time slot which can supply the electricity power to PHEV should be allowed between 1:00 a.m.$\sim$7:00 a.m.

• International Journal of High-Rise Buildings
• /
• v.1 no.2
• /
• pp.73-80
• /
• 2012

In order to use sea breezes to counter the heat island phenomena, i.e. to promote urban ventilation, it is necessary to clarify the effect of building morphology and height on large-scale wind fields. In this study, the sea breeze in the vicinity of the Kanto Plain in Japan is simulated using a mesoscale meteorological model incorporating an urban canopy model, and the inland penetration of sea breezes is accurately reproduced. Additionally, a mean kinetic energy balance within a domain (Control Volume; CV) moving along the sea breeze is analysed. From the results, it is clarified that the sea breeze is interrupted by the resistance and turbulence caused by buildings at the centre of Tokyo. The interruption effect is increased in accordance with the height of these buildings. On the other hand, adverse pressure gradients interrupt in the internal region.

• Restorative Dentistry and Endodontics
• /
• v.19 no.2
• /
• pp.585-601
• /
• 1994

The purpose of this study was to evaluate the ability of several intracoronal base materials to prevent cervical leakage of a bleaching agent into the dentinal tubules and along the root canal. In this study, thirty-two anterior teeth were used. After lingual access was prepared in each tooth, tooth was instrumented with a step-back technique to a Nos. 40-50 using K-type files. All teeth were obturated with a lateral condensation technique. Excess gutta percha was removed with a warm instrument to the facial level of the CEJ. Teeth were divided into four groups : Teeth in control group were not filled with base material. Teeth in groups 1, 2, and 3 had 2mm of gutta percha removed with a warm instrument, then Dycal, Fuki II LC and Z-100 were filled with palstic instruments on the top of the gutta percha respectively. All teeth were bleached for 7 days, fresh bleach was added for another 7 days, then a 10 % methylene blue dye was placed inside the access preparation. They were stored at $37^{\circ}C$ and $100^{\circ}C$ humidity for 5 days. Each tooth was sectioned perpendicular to the long axis using a diamond disk. Initial cuts were made at the most coronal level of facial and lingual CEJ's, then another cuts continued appically in the levels of 0.5mm, 1.5mm, and 2.0mm respectively. The amount of dye leakage through the dentinal tubules was determined at each cut section. In addition, when the cut specimen was determined to be last penetration of any dye, this level was recorded as depth of apical leakage from the coronal terminus of the gutta percha, Dycal, Fuji II LC and Z-100. The acquired data were analyzed by Tukey's Multiple Range Test adn Cochran-Mantel-Haenszel Test to see if there was any statistically significant difference in dye penetration and linear apical leakage among the groups. The results were as follows : 1. Control group at levels of CEJ and 0.5mm, group 3 at level of 1.5mm, and group 2 AND 3 at level of 2.0mm showed the least dye penetration through the facial or lingual dentinal tubules, but there were no significant difference among three groups. 2. Group 2 at levels of CEJ and 0.5mm, group 3 at level of 1.5mm, and group 2 and 3 at level of 2.0mm showed the least dye penetration through the proximal dentinal tubules, but there were no significant difference among control group, group 2, and group 3. 3. Group 1 showed the greatest dye penetration through the facial or lingual and proximal dentinal tubules at all levels, and there were significant difference with other three groups. 4. Control group and group 1 showed 2mm apical dye leakage at facial or lingual and proximal aspects, group 2 showed 1.5mm, and group 3 showed 0.5mm.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.4
• /
• pp.320-324
• /
• 2018

In this study, we examined effect of sperm penetration of oocytes after in vitro fertilization (IVF) with cauda epididymal spermatozoa in Hanwoo bull after feeding of timothy hay. One testicle with epididymides was castrated from one Hanwoo bull (14 months of age) and spermatozoa recovered from cauda epididymis and cryopreserved. As control, frozen Hanwoo semen was used. Matured cumulus oocyte complexes were co-incubated with frozen-thawed cauda epididymal spermatozoa for 12 or 18 hours. After IVF, presumptive zygotes were cultured in modified synthetic oviductal fluid. In experiment 1, we examined sperm penetration rate at 12 hours of IVF with epididymal sperm. Total penetration rate among cauda epididymis and control was similar(mean${\pm}$standard error, cauda epididymis and control vs. $49.7{\pm}11.3$ and $54.4{\pm}12.8%$). In experiment 2, cleavage and blastocyst developmental rate were evaluated at day 2 and day 8 after IVF for 18 hours. Cleavage rate among cauda epididymis and control was similar(cauda epididymis and control vs. $81.2{\pm}3.4$ and $82.7{\pm}2.5%$). However, blastocyst developmental rate of cauda epididymis group was significantly higher than that of control group(cauda epididymis and control vs. $24.4{\pm}1.6$ and $12.2{\pm}2.8%$, p<0.05). In conclusion, cauda epididymal spermatozoa in Hanwoo bull has high embryo developmental competence and can be used as an alternative to ejaculated frozen sperm in vitro.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.1
• /
• pp.29-36
• /
• 2003

Clenbuterol, a selective ${\beta}_2-adrenergic$ receptor stimulant, has been introduced as a potent bronchodilator for patients with bronchial asthma, chronic obstructive bronchial disease, chronic bronchitis and pulmonary emphysema. The percutaneous permeation of clenbuterol was investigated in hairless mouse skin after application of 50/50 buffer(pH 10)/propylene glycol solvent mixture. The enhancing effects of various penetration enhancers such as terpenes, non-ionic surfactants, pyrrolidones, fatty acids and some other enhancers on the permeation of clenbuterol were evaluated using Franz diffusion cell. Among terpenes studied, 1,8-cineole was the most effective enhancer, which increased the permeability of clenbuterol approximately 39.33-fold compared with the control without penetration enhancer, followed by menthone with enhancement ratio of 23.57. Nonionic surfactants did not have significant enhancing effects. N-Lauryl-2-pyrrolidone increased the permeability of clenbuterol approximately 4.51-fold compared with the control. Lauric acid increased the permeability of clenbuterol approximately 35.57-fold with decreasing the lag time from 2.64 to 0.52 hr. Oleic acid, linoleic acid, linolenic acid and capric acid showed enhancement ratio of 22.62, 19.60, 17.45 and 16.51, respectively. $Labrafil^{\circledR}$ enhanced the permeability of clenbuterol 9.24-fold compared with that without enhancer.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4022-4029
• /
• 2022

We investigated the possibility of using graphene for control of hydrogen isotopes by exploring adsorption, reflection, and penetration of hydrogen isotopes on graphene using molecular dynamics. Reflection is the dominant interaction when hydrogen isotopes have low incident energy. Adsorption rates increase with increasing incident energy until 5 eV is reached. After 5 eV, adsorption rates decrease as incident energy increases. At incident energies greater than 5 eV, adsorption rates increase with the number of graphene layers. At low incident energies (<1 eV), no isotopic effects on interactions are observed since the predominant interaction is derived from the force of π electrons. Between 1 eV and 50 eV, heavier isotopes exhibit higher adsorption rates and lower reflection rates than lighter isotopes, due to the greater momentum of heavier isotopes. Adsorption rates are consistently higher when the incident angle of the impacting atoms is smaller between 0.5 eV and 5 eV. At higher energies (>5 eV), larger incident angles lead to higher reflection and lower penetration rates. At high incident energies (>5 eV), crumpled graphene has higher adsorption and lower penetration rates than wrinkled or unwrinkled graphene. The results obtained in this research study will be used to develop novel nanomaterials that can be employed for tritium control.

• Safety and Health at Work
• /
• v.14 no.4
• /
• pp.457-466
• /
• 2023

Background: During hot environment work tasks with whole-body enclosed anti-bioaerosol suit, the combined effect of heavy sweating and exhaled hot humid air may cause the N95 medical respirator to saturate with water/sweat (i.e., water-blocking). Methods: 32 young male subjects with different body mass indexes (BMI) in whole-body protection (N95 medical respirator + one-piece protective suit + head covering + protective face screen + gloves + shoe covers) were asked to simulate waste collecting from each isolated room in a seven-story building at 27-28℃, and the weight, inhalation resistance (R_f), and aerosol penetration of the respirator before worn and after water-blocking were analyzed. Results: All subjects reported water-blocking asphyxia of the N95 respirators within 36-67 min of the task. When water-blocking occurred, the R_f and 10-200 nm total aerosol penetration (P_t) of the respirators reached up to 1270-1810 Pa and 17.3-23.3%, respectively, which were 10 and 8 times of that before wearing. The most penetration particle size of the respirators increased from 49-65 nm before worn to 115-154 nm under water-blocking condition, and the corresponding maximum size-dependent aerosol penetration increased from 2.5-3.5% to 20-27%. With the increase of BMI, the water-blocking occurrence time firstly increased then reduced, while the R_f, P_t, and absorbed water all increased significantly. Conclusions: This study reveals respirator water-blocking and its serious negative impacts on respiratory protection. When performing moderate-to-high-load tasks with whole-body protection in a hot environment, it is recommended that respirator be replaced with a new one at least every hour to avoid water-blocking asphyxia.