• 제목/요약/키워드: Penetration control

검색결과 622건 처리시간 0.03초

브라운관 전자총 부품의 펄스 Nd:YAG레이저 용접에 관한 연구 (I) - 빔의 출력특성과 광학변수 - (A Study on Pulsed Nd:YAG Laser Welding of Electron Gun in Braun Tubes (I) - Characteristics of Beam Output Energy and Optical Parameters -)

  • 김종도;하승협;조상명
    • Journal of Welding and Joining
    • /
    • 제20권4호
    • /
    • pp.525-534
    • /
    • 2002
  • During laser spot welding of the braun tube electron gun, phenomena such as serious spattering and oxidative reaction, etc. were occurred. The spatter occurred from weld pool affects the braun tube, namely it blocks up a very small hole on the shadow mask and causes short circuit between two roles of the electron gun. We guessed that high power density and oxidative reaction are main sources of these problems. So, we studied to prevent and to reduce spatter occurring in spot welding of the braun tube electron gun using pulsed Nd:YAG laser. The characteristics of laser output power was estimated, and the loss of laser energy by optical parameter and spatter was measured by powermeter. The effects of welding parameters, laser defocused distance and incident angle, were investigated on the shape and penetration depth of the laser welded bead in flare and flange joints. From these results, the laser peak power was a major factor to control penetration depth and to occur spatter. It was found that the losses of laser energy by optic parameter and sticked spatter affect seriously laser weldability of thin sheets. The deepest penetration depth is gotten on focal position, and a "bead transition" occurred with a slight displacement of focal position relative to the workpiece surface and the absorption rate of the laser energy is affected by the shape factor of the workpiece. When we changed the incident angle of laser beam, the penetration depth was decreased a little with increasing of the incident angle, and the bead width was increased. The spattering was prevented by considering laser beam energy and incident angle.ent angle.

Vulnerability Analysis on a VPN for a Remote Monitoring System

  • Kim Jung Soo;Kim Jong Soo;Park Il Jin;Min Kyung Sik;Choi Young Myung
    • Nuclear Engineering and Technology
    • /
    • 제36권4호
    • /
    • pp.346-356
    • /
    • 2004
  • 14 Pressurized Water Reactors (PWR) in Korea use a remote monitoring system (RMS), which have been used in Korea since 1998. A Memorandum of Understanding on Remote Monitoring, based on Enhanced Cooperation on PWRs, was signed at the 10th Safeguards Review Meeting in October 2001 between the International Atomic Energy Agency (IAEA) and Ministry Of Science and Technology (MOST). Thereafter, all PWR power plants applied for remote monitoring systems. However, the existing method is high cost (involving expensive telephone costs). So, it was eventually applied to an Internet system for Remote Monitoring. According to the Internet-based Virtual Private Network (VPN) applied to Remote Monitoring, the Korea Atomic Energy Research Institute (KAERI) came to an agreement with the IAEA, using a Member State Support Program (MSSP). Phase I is a Lab test. Phase II is to apply it to a target power plant. Phase III is to apply it to all the power plants. This paper reports on the penetration testing of Phase I. Phase I involved both domestic testing and international testing. The target of the testing consisted of a Surveillance Digital Integrated System (SDIS) Server, IAEA Server and TCNC (Technology Center for Nuclear Control) Server. In each system, Virtual Private Network (VPN) system hardware was installed. The penetration of the three systems and the three VPNs was tested. The domestic test involved two hacking scenarios: hacking from the outside and hacking from the inside. The international test involved one scenario from the outside. The results of tests demonstrated that the VPN hardware provided a good defense against hacking. We verified that there was no invasion of the system (SDIS Server and VPN; TCNC Server and VPN; and IAEA Server and VPN) via penetration testing.

탄소섬유 방제 마스크의 농약차단효과 및 흰쥐의 급성 흡입독성 예방효과 (Inhibitory Activity of Pesticide-preventing Active Carbon Fiber Mask on the Penetration of Pesticide and its Inhibitory Effect on Acute Inhalation Toxicity in Rats)

  • 김창종;최현호;심상수;신화우
    • 약학회지
    • /
    • 제42권4호
    • /
    • pp.447-458
    • /
    • 1998
  • Inhibitory activity of pesticide-preventing active carbon fiber mask on the penetrations in pesticide spray and its inhibitory effect on acute inhalation toxicity in rats were s tudied. Pesticides were sprayed into box ($1.O{\times}1.2{\tmies}O.6\;m$) at a dose of 20ml/min of diazinon ($Diatone^{TM}$) suspension (340ppm) and 5g/min of BPMC powder (2.0%) for 4 hours, and then captured the penetrated pesticides into water via mask in box under 8l/sec suction. The pesticides were analysed by A.O.A.C. method and GC/MS. Pesticide-preventing active carbon fiber mask significantly inhibited the penetration of diazinon by 93.4% as compared with control, and cotton mask and pesticide-preventing mask did it by 74.2% and 83.7%,respectively. This result shows that pesticide-preventing active carbon fiber mask has the most prominent inhibitory effect in preventing the penetration of diazinone. In the penetration of BPMC, all of three masks, such as active carbon fiber mask, cotton mask and pesticide-preventing mask, have a similar inhibitory effect, which were 99.3%, 98.6% and 97.0%, respectively. The penetrated pesticides via pesticide-preventmg active carbon fiber mask did not exert acute inhalation toxicity.

  • PDF

근관충전 시 수분오염이 치근단 폐쇄성에 미치는 영향에 관한 연구 (A STUDY ON THE EFFECT OF MOISTURE ON APICAL SEALING PROPERTY OF ROOT CANAL)

  • 임성삼;강명회
    • Restorative Dentistry and Endodontics
    • /
    • 제21권2호
    • /
    • pp.628-634
    • /
    • 1996
  • The purpose of this study was to investigate the effect of moisture on apical sealing properties of root canal. Fifty five single rooted human teeth were selected from maxillary and mandibular teeth. After removing crown portion at the cemento-enamel junction, all teeth were routinely prepared with step-back method. And then, the canals were dried with paper point and the teeth were randomly divided into 3 groups of 15 teeth each, and remaining 10 teeth were used as positive and negative control teeth : Group 1 were irrigated with 1ml of 95% alcohol and dried with air and paper point. Group 2 and 3 were intentionally contaminated with 0.05ml of 3.5% NaOCl or saliva, respectively. All the teeth were obturated with sealapex and gutta percha cone by lateral condensation technique, and covered with two coat of nail varnish after 48 hours of obturation. The teeth were immersed in india ink for 1 week and cleaned with methyl salicylate and then the degree of dye penetration were measured with stereomicroscope. The data were analyzed statistically by one-way ANOVA. The results were as follows : 1. All experimental groups showed varying degrees of dye penetration, and the mean degree of dye penetration was 0.1mm to 0.7mm. 2. Saliva contamination group(group 3) showed the highest amount of dye penetration, followed by NaOCl contamination group, then alcohol dried group, but there was no significant difference among three experimental groups. * This results suggest that there was no significant differences of apical leakage after canal obturation between alcohol dried canal and moisture present canals and the use of alcohol instead of paper point is unnecessary to dry the canals prior to canal filling. But other factors such as bacterial contamination and sealer discoloration by moisture must be considered in application of this results to clinical practice.

  • PDF

IDM을 이용한 자율주행자동차 시장점유율 변화가 고속도로 교통류에 미치는 영향 분석 (Analysis of Effects of Autonomous Vehicle Market Share Changes on Expressway Traffic Flow Using IDM)

  • 고우리;박상민;소재현;윤일수
    • 한국ITS학회 논문지
    • /
    • 제20권4호
    • /
    • pp.13-27
    • /
    • 2021
  • 본 연구에서는 영동고속도로 용인IC~양지IC구간을 대상으로 2020년 데이터를 활용하여 자율주행자동차의 시장점유율 변화가 교통류에 미치는 영향을 추정하였다. 교통류에 미치는 영향 정도를 추정하기 위해 미시교통시뮬레이션 모형인 VISSIM을 활용하였다. 자율주행자동차의 종방향 제어를 반영하기 위해서 intelligent driver model(IDM)을 구축 후 VISSIM에 적용하여 일반차와 비교를 수행하고 주행행태를 검증하였다. 자율주행자동차의 시장점유율에 따른 이동성 및 안전성 분석 결과, 자율주행자동차 도입 시 시장점유율이 높아질수록 네트워크의 이동성은 향상되지만, 안전성의 경우 차종이 혼재되었을 때 교통류가 불안정해지므로 더욱 안전 관리에 집중해야 한다는 것을 확인하였다.

The Effects of Neuromuscular Electrical Stimulation on Swallowing Function in Acute Stroke Patients with Dysphagia

  • Kim, Myung-Kwon;Lee, Chang-Ryeol;HwangBo, Gak
    • International Journal of Contents
    • /
    • 제7권4호
    • /
    • pp.98-102
    • /
    • 2011
  • In this study, we investigated the effects of neuromuscular electrical stimulation (NMES) on the treatment of 20 acute stroke patients with dysphagia. For both the treated and control groups, the basic facial stimulation training was conducted for 30 minutes, five times a week, for four weeks. NMES was performed on the treated group only, for 30 minutes each time. Both groups were evaluated according to the functional dysphagia scale (FDS) using a videofluoroscopic swallowing study (VFSS). After the treatment was performed for four weeks, the FDS results of the treated group showed a significance difference in oral transit time in the oral phase and in the triggering of pharyngeal swallow fluid, laryngeal elevation and epiglottic closure, nasal penetration, residue in valleculae, coating of pharyngeal wall after swallow fluid, and pharyngeal transit time in the pharyngeal phase. In addition, the treated group showed a significant difference in laryngeal elevation and epiglottic closure, nasal penetration, and pharyngeal transit time in the pharyngeal phase after the treatment compared to the control group. The results of this study showed that neuromuscular electrical stimulation may be an effective method of treating dysphagia in acute phase stroke patients.

Durability Enhancement in Nano-Silica Admixed Reinforced Mortar

  • Saraswathy, Velu;Karthick, Subbiah;Kwon, Seung-Jun
    • 한국건설순환자원학회논문집
    • /
    • 제2권4호
    • /
    • pp.297-306
    • /
    • 2014
  • Recently nano-materials are gaining more importance in the construction industry due to its enhanced energy efficiency, durability, economy, and sustainability. Nano-silica addition to cement based materials can control the degradation of the fundamental calcium-silicate-hydrate reaction of concrete caused by calcium leaching in water as well as block water penetration and therefore lead to improvements in durability. In this paper, the influence of synthesized nano silica from locally available rice husk on the mechanical properties and corrosion resistant properties of OPC (Ordinary Portland Cement) has been studied by conducting various experimental investigations. Micro structural properties have been assessed by conducting Scanning Electron Microscopy, Thermo gravimetry and Differential Thermal Analysis, X-Ray Diffraction analysis, and FTIR studies. The experimental results revealed that NS reacted with calcium hydroxide crystals in the cement paste and produces Calcium Silicate Hydrate gel which enhanced the strength and acts as a filler which filled the nano pores present in concrete. Hence the strength and corrosion resistant properties were enhanced than the control.

Motility, Fertilizability and Subsequent Embryonic Development of Frozen-thawed Spermatozoa derived from Epididymis in Hanwoo

  • Yang, Byoung-Chul;Kang, Sung-Sik;Park, Chang-Seok;Kim, Ui-Hyung;Kim, Hyeong-Cheol;Jeon, Gi-Jun;Kim, Sidong;Lee, Seok-Dong;Lee, Hyun-Jae;Cho, Sang-Rae
    • 한국수정란이식학회지
    • /
    • 제30권4호
    • /
    • pp.271-276
    • /
    • 2015
  • The aim of the study was to investigate the ability of sperm derived from the epididymis in regard to sperm motility, sperm penetration to oocyte and subsequent development of the embryo. Frozen-thawed sperm from epididymis showed similar percentage of motile sperm (VSL ${\geq}25{\mu}m/sec$) as compared to that of commercial sperm (control). Sperm penetration of frozen-thawed epididymal and commercial sperm was not significantly different. Moreover, cleavage and blastocyst rates were similar in both epididymal and control. Sperm derived from the epididymis also showed fertilizability and subsequent embryonic development.

Visual Precise Measurement of Pile Rebound and Penetration Movement Using a High-Speed Line-Scan Camera

  • Lim, Mee-Seub;You, Bum-Jae;Oh, Sang-Rok;Han, Song-Soo;Lee, Sang-Hun
    • Transactions on Control, Automation and Systems Engineering
    • /
    • 제4권4호
    • /
    • pp.341-346
    • /
    • 2002
  • When a construction company builds a high structure. many piles should be driven into the ground by a hammer whose weight is 7,000 kg in order to make the ground under the structure safe and strong. So. it is essential to determine whether a pile is penetrated into the ground enough to support the weight of the structure since ground characteristics at different locations are different each other. This paper proposes a visual measurement system for pile rebound and penetration movement including vibration using a high-speed line-scan camera and a specially designed mark to recognize two-dimensional motion parameters of the mark using only a line-scan camera. A mark stacking white and black right-angled triangles is used for the measurement, and movement information for vertical distance, horizontal distance and rotational angle is determined simultaneously. Especially- by adopting a line-scan CCD camera whose line rate is 20 ㎑. the measurement performance of dynamic characteristics of the pile at impact instant is improved dramatically.

2차 가진 제어 변조분사 특성 및 액체제트의 분무특성 (Spray Characteristics of a Modulated Liquid Jet through 2nd Pulsed Control)

  • 강영수;이인철;구자예
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.672-675
    • /
    • 2010
  • 본 연구에서는 저주파영역의 가진분무에 대하여 추가적인 내부가진을 수행함으로써 변조분사되는 분무특성에 대한 연구를 수행하였다. 회전식 가진장치를 사용하여 1차 가진을 생성한 후 2차 가진원인 마그네틱 밸브를 사용하여 변조하였다. 변조분무의 FFT결과와 분무패턴의 가시화를 통하여 관찰한 결과, 2차 가진 제어가 있는 변조분사의 경우 1차 가진만 있는 분사보다 분무의 상하 운동 진폭이 작으며 분무 하단류의 침투깊이가 증가하는 경향성이 발견되었다.

  • PDF