• The Journal of the Petrological Society of Korea
• /
• v.24 no.2
• /
• pp.77-90
• /
• 2015

The fission track registration techniques for accurate determinations of uranium in solid- and liquid-state geological materials were recommended and their applicability were examined. The determination of uranium can be achieved by optical counting of neutron-induced fission tracks of $^{235}U$ registered on solid-state track detectors under high magnification. In a dry registration method using powdered pellets of rocks (e.g., granite and coal) showing good uranium-affinity, it was not easy to decide an overall mean concentration over the total sample owing to track-clusters caused by frequent presence of uranium-bearing minerals. Separate scanning for homogeneous and track-clustered parts may be an alternative choice. Assuring the homogeneity over the whole sample, high reproducibilities were confirmed both from duplicate detections using mica and Lexan polycarbonate detectors and from multiple measurements at different thermal neutron fluences. The wet registration method using sealed quartz tubes is recommended to overcome the common heterogeneity in uranium concentrations of $10^1ppm$ and more. Adopting the wet registration, the uranium homogeneity was recovered below the $10^0ppm$ level and the lower detection limit was proved to reach without difficulty the $10^2ppb$ (i.e. $ng\;g^{-1}$) level.

• Journal of Radiation Protection and Research
• /
• v.31 no.3
• /
• pp.129-134
• /
• 2006

A TL pellet for a neutron dose measurement (KCT-306) by embedding a $^6Li$-compound into a $CaSO_4:Dy$ phohphor was developed based upon the technical information of KCT-300. The KCT-300 is an another kind of $CaSO_4:Dy$ TL detector shich was developed at KAERI, in which small amounts of $NH_4H_2PO_4$ have been emvedded as a binding material. This paper presented the optimized manufacturing condition of KCT-306 and compared its sensitivity with that of the commercialized neutron TL pellets. $CaSO_4:Dy$ Phosphor with grain size ranging less than $45{\mu}m$ are used for the KCT-306. The optimum $CaSO_4:Dy$ TL phosphor, $^6Li$-compounds and P-compound as the binding material are determined as 20-40wt%, 50-70wt% and 20wt%. The TL pellet combination of our KCT-306/KCT-300, TLD-600/TLD-700 and TLD-600H/TLD-700H(Harshaw) have been irradiated in the neutron/gamma mixed fields from a $D_2O$ moderated $^{252}Cf$ neutron source. The KCT-300, TLD-700 and TLD-700H were used at the same time as gamma ray discriminators in the neutron/gamma mixed fields. It was found that the neutron/gamma response ratios of KCT-306/KCT-300, which were developed in this study, were approximately 4 times higher than those of the commercial TLD-600H/TLD-700H.

• 한국균학회소식:학술대회논문집
• /
• 2016.05a
• /
• pp.25-25
• /
• 2016

Biological control has many advantages as a disease control method, particularly when compared with pesticides. One of the most important benefits is that biological control is an environmental friendly method and does not introduce pollutants into the environment. Another great advantage of this method is its selectivity. Selectivity is the important factor regarding the balance of agricultural ecosystems because a great damage to non target species can lead to the restriction of natural enemies' populations. The objective of this research was to evaluate the effects of several different bacterial isolates on the efficacy of biological control of soil borne diseases. White rot caused by Sclerotium cepivorum was reported to be severe disease of garlic and chive. The antifungal bacteria Burkholderia pyrrocinia CAB08106-4 was tested in field bioassays for its ability to suppress white rot disease. In field tests, B. pyrrocinia CAB08106-4 isolates suppressed white rot in garlic and chive, with the average control efficacies of 69.6% and 58.9%, respectively. In addition, when a culture filtrate of B. pyrrocinia CAB08106-4 was sprayed onto wounded garlic bulbs after inoculation with a Penicillium hirstum spore suspension in a cold storage room ($-2^{\circ}C$), blue mold disease on garlic bulbs was suppressed, with a control efficacy of 79.2%. These results suggested that B. pyrrocinia CAB08106-4 isolates could be used as effective biological control agents against both soil-borne and post-harvest diseases of Liliaceae. Chinese cabbage clubroot caused by Plasmodiophora brassicae was found to be highly virulent in Chinese cabbage, turnips, and cabbage. In this study, the endophytic bacterium Flavobacterium hercynium EPB-C313, which was isolated from Chinese cabbage tissues, was investigated for its antimicrobial activity by inactivating resting spores and its control effects on clubroot disease using bioassays. The bacterial cells, culture solutions, and culture filtrates of F. hercynium EPB-C313 inactivated the resting spores of P. brassicae, with the control efficacies of 90.4%, 36.8%, and 26.0%, respectively. Complex treatments greatly enhanced the control efficacy by 63.7% in a field of 50% diseased plants by incorporating pellets containing organic matter and F. hercynium EPB-C313 in soil, drenching seedlings with a culture solution of F. hercynium EPB-C313, and drenching soil for 10 days after planting. Soft rot caused by Pectobacterium carotovorum subsp. carotovorum was reported to be severe disease to Chinese cabbage in spring seasons. The antifungal bacterium, Bacillus sp. CAB12243-2 suppresses the soft rot disease on Chinese cabbage with 73.0% control efficacy in greenhouse assay. This isolate will increase the utilization of rhizobacteria species as biocontrol agents against soft rot disease of vegetable crops. Sclerotinia rot caused by Sclerotinia sclerotiorum has been reported on lettuce during winter. An antifungal isolate of Pseudomonas corrugata CAB07024-3 was tested in field bioassays for its ability to suppress scleritinia rot. This antagonistic microorganism showed four-year average effects of 63.1% of the control in the same field. Furthermore, P. corrugata CAB07024-3 has a wide antifungal spectrum against plant pathogens, including Sclerotinia sclerotiorum, Sclerotium cepivorum, Botrytis cinerea, Colletotrichum gloeosporioides, Phytophotra capsici, and Pythium myriotylum.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.170-175
• /
• 1988

This experiment was carried out to study the properties of casein micelles obtained from colostral skim milk. As lactation was progressed from parturition until 240h after calving, the content of total protein decreased while the proportion of casein to whey protein increased. Fractionaltion according to the site of casein micelle was done by ultracentrifugation at 100,000 x g for 10 minutes(pellet 1), 30 minutes(pellet 2) and 60 mintes(pellet 3) and the serum casein was prepared by acid precipitation of final supernatant at pH 4.6. During the lactation period, the relative amount of pellet 1(large size) decreased, that of pellet 2(middle size) maintained nearly constant level except for pllet from parturition, that of pellet 3(small size) increased, and the serum casein showed almost constant level. The relative amounts of ${\alpha}_{s1}-casein\;and\;{\alpha}_{s2}-casein\;and\;{\beta}-casein-5P$ in the pellets decreased and that of x-casein increased markedly with decreasing micelle size, but the relative amounts of ${\beta}-casein-1P$(f 29-209), (f 106-209) and (f 108-209) showed little change. The composition of the serum casein was different from that of the skim milk casein.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.597-602
• /
• 2010

The most basic matter to establish forest carbon circulation village is statistic on greenhouse gas emissions. But currently, although there is statistic on greenhouse gas emissions in the level of city or province, there is not statistic on greenhouse gas emission in village unit. According to the results, The model area is located in Seobyeok-ri, Chunyang-myeon, Bonghwa-gun, Gyeongsangbuk-do, the total $CO_2$emissions caused by energy used in the model area was $1,755tCO_2$. Heating accounts for 55% of total emissions followed by 23% for power and 22% for vehicles. The model area emitted $572tCO_2$ due to rice growing and livestock raising, accounting for approximately 24.5% of total $CO_2$ emissions. It is expected that a reduction of as much as $884tCO_2$ emissions will be made from the current $964tCO_2$ to a level of 1/12th that amount, or $80tCO_2$ by replacing heating energy currently used in the model area with wood bioenergy such as wood chips or pellets. In addition, carbon emission reduction is expected for both heating and power by replacing the power consumption in houses, buildings, and street lights with solar power.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.1
• /
• pp.41-49
• /
• 1993

The bioequivalence of two omeprazole enteric-coated products was evaluated in 16 normal male volunteers (age 26-32 yr, body weight 57-75 kg) following single oral administration. Test product was enteric-coated KD-182 tablet (Chong Kun Dang Corp., Korea) and reference product was $Rosec^{\circledR}$ capsule containing enteric-coated pellets of omeprazole (Yuhan Corp., Korea). Both products contain 20 mg of omeprazole. One tablet or capsule of the test or the reference product was administered to the volunteers, respectively, by randomized two period cross-over study ($2\;{\times}\;2$ Latin square method). Average drug concetrations at each sampling time and pharmacokinetic parameters calculated were not significantly different between two products(p>0.05); the area under the concentrationtime curve to last sampling time (8 hr) $(AUC_{0-8hr})$ $(1946.5{\pm}675.3\;vs\;2018.3{\pm}761.6\;ng{\cdot}hr/ml)$, AUC from time zero to infinite $(AUC_{o-\infty})$ $(2288.6{\pm}1212.8\;vs\;2264.9{\pm}1001.3\;ng{\cdot}hr/ml)$, maximum plasma concentration $(C_{max})$ $(772.5{\pm}283.3\;vs\;925.8{\pm}187.7\;ng/ml)$, time to maximum plasma concentration $(T_{max})$ $(2.38{\pm}1.06\;vs\;2.34{\pm}1.09\;hr)$, apparent elimination rate constant $(k_{\ell})$ $(0.5339{\pm}0.2687\;vs\;0.5769 {\pm}0.2184\;hr^{-I})$, apparent absorption rate constant $(k_a)$ $(1.1536{\pm}0.5278\;vs\;0.9739{\pm}0.9507 hr^{-1})$ and mean residence time (MRT) $(3.13{\pm}0.73\;vs \;3.41{\pm}1.04\;hr)$. The differences of mean $(AUC_{0-8hr})$, $C_{max}$, $T_{max}$ and MRT between the two products (3.69, 19.83, 1.32 and 8.99%, respectively) were less than 20%. The power $(1-{\beta})$ and treatment difference $(\triangle)$ for $AUC_{o-8hr}$ $C_{max}$ and MRT were more than 0.8 and less than 0.2, respectively. Although the power for $T_{max}$ was under 0.8, $T_{max}$ of the two products was not significantly different each other(p>0.05). These results suggest that the bioavailability of KD-182 tablet is not significantly different from that of $Rosec^{\circledR}$ capsule. Therefore, two products are bioequivalent based on the current results.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.1
• /
• pp.17-23
• /
• 2002

In order to investigate effects if loess on the mycellial pellet formation a phosphate-solubilizing fungus. Aspergillus sp. PS-104 was cultured in potato dextrose broth containing loess. The strain formed an amorphous pellet or loose aggregates agitated at a low speed (50 rpm) while spherical and regular pellets at a high speed (150 rpm) The higher concentration of loess was added, the smaller size of a pellet was formed during the submerged culture of the strain. As shown in results, being cultured in the PDB medium supplemented with 1.0% loess the pellet size was maximally reduced to a fourth compared to the control. Evaluating the addition effect of several components of loess such as $SiO_2$, $Fe_2O_3$, $Al_2O_3$, $CaCO_3$, $CaSO_4$ and $MgCO_3$ on the reduction of mycellial pellet size the higher concentration was supplied, the smaller size of pellet was formed except $Al_2O_3$. And the smallest pellet size was recorded at the concentration of 1.0% (W/V) magnesium carbonate.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.399-422
• /
• 1995

The purpose of this study was to investigate a fragment of possibility of pulpotomy with the Nd-YAG laser by the observation of pulpal healing process and the fine structural changes of the fibroblasts of the remaining pulpal tissues. Class V cavities on !55 teeth from 4 adult dogs were prepared and the pulp chambers were opened with a sterilized round bur. In the control group(19 teeth), the exposed coronal pulps were excised by a sharp excarvator. After bleeding was controlled with the sterilized cotton pellets, calcium hydroxide powder was applied on the remaining pulpal tissues and the cavities were sealed with Z.O.E. In the experimental group 1 : the pulpotomy with laser-calcium hydroxide powder application group(l9 teeth), the exposed coronal pulps were excised by Nd-YAG laser(10 watts power, 2 psi water, 20 psi air) for 2 or 3 seconds and calcium hydroxide powder was applied on the remaining pulpal tissues and the cavities were sealed with Z.O.E. In the experimental group 2 : the pulpotomy with laser-no calcium hydroxide powder application group(17 teeth), after amputating the coronal pulps with Nd-YAG laser as the experimental group 1, the remaining pulpal tissues were covered with stenilized aluminum foil and the cavities were filled with Z.O.E. The animals were sacrificed at the intervals of 1, 2, 3 and 4 weeks. All the teeth were rouutinely processed and the remaining pulpal tissues were observed by the light microscope and electron microscope. The results were as follows : 1. In light microscopic findings, there was no significant difference of the inflammatory response in the remaining pulpal tissues between the control group and the experimental groups. In both of the experimental group 1 : pulpotomy with laser-calcium hydroxide powder application group and the control group, the dentin bridges were observed after 2 weeks and the structure of the dentin bridge was almost same. In the experimental group 2 : pulpotomy with laser-no calcium hydroxide powder application group, the fibrous layers instead of dentin bridge were observed on the superficial portion of the remaining pulpal tissues after 2 weeks and they were consisted with densely crowded active fibroblasts. 2. In the electronmicroscopic findings, the active fibroblasts in the experimental groups were more frequently observed than in the control group at 1 week. But active fibroblasts were found with same frequency after 2 weeks in all of the control group and the experimental groups. 3. General distortions of the cell such as loss of the cell membrane, vaculoization of the cell etc. were observed at the suberficial layer of the remaining pulpal tissues and the carbonization was found in the dentinal wall in 1 week of the experimental groups. 4. In the experimental group 2 : pulpotomy with laser-no calcium hydroxide powder application group, the activity and the density of the fibroblasts in the fibrous layer were more than those in the deep portion of the remaining pulpal tissues after 2 weeks. 5. In the control group, bacteria such as cocci and bacilli were observed frequently, but in the experimntal groups, they could not be observed.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.340-345
• /
• 2010

Purpose: Recently, bioceramics have become popular as a substitute graft material for reconstruction of bony defect after trauma or tumor surgery. Among the bioceramic materials, hydroxyapatite (HA) is favored due to its biocompatibility. HA scaffold is composed of the interconnected reticular framework, macropores and micropores. Macropores play an important role in cell migration, nutrients supply and vascular ingrowth. On the other hand, a number of micropores less than $10{\mu}m$ form an irregular surface on HA scaffolds, which prevents the osteoblast from adhering and proliferating on the surface of HA scaffold. Methods: In this study, three different groups were designed for comparison. In the first group (group A), conventional method was used, in which HA pellet was applied without surface pretreatment. The second group (group B) was given a HA pellet that has been coated with crystalline HA solution prior to application. In the third group (group C), the same method was used as the second group, where the pretreated HA pellet was heated ($1250^{\circ}C$, 1 hour) before application. Osteoblast-like cells ($2{\times}10^4$/mL) were scattered onto every pellet, then they were incubated in 5% $CO_2$ incubator at $37^{\circ}C$ for twelve days. During the first three days, osteoblast cells were counted using the hemocytometer daily. ALP activity was measured on the 3, 6, 9 and 12 culture days using the spectrophotometer. Results: Under SEM, group A showed a surface with numerous micropores, and group B revealed more rough crystal surface. Group C revealed a fused crystal appearance and flattened smooth surface. In proliferation and ALP activity of osteoblast cells, group C showed better results compared to group B. Group A which lacks pretreatment of the surface showed less osteoblast proliferation and ALP activity than group C, but showed better results than group B. Conclusion: We found that crystallized HA with heat treatment method enhances the osteoblasts proliferation and differentiation on the surface of HA pellets.

• Journal of Life Science
• /
• v.17 no.3 s.83
• /
• pp.305-311
• /
• 2007

Glucocorticoids (GCs) alter metabolism, synaptogenesis, apoptosis, neurogenesis, and dendritic morphology in the hippocampus. To better understand how glucocorticoids regulate these aspects of hippocampal biology, we studied gene expression patterns in the CA3 (Hippocampal pyramidal cell field CA3) and dentate gyrus (DG). Litter-matched Lewis inbred rats treated for 20 days with either 9.5 mg per day sustained-release corticosterone or placebo pellets were compared with high-density oligonucleotide microarray analysis (Rat Neurobiology U34 Arrays, Affymetrix). In placebo-treated rats, 32 genes were expressed at greater levels in CA3 than DG, whereas 3 genes were expressed at great levels in DC than CA3. Regional differences were also apparent in corticosterone-induced changes in the hippocampal transcriptome. Six genes in CA3 and 41 genes in DC were differentially regulated by corticosterone. As per the glucocorticoid effects on gene transcription in the brain, forty three of these genes were upregulated, and 4 genes were downregulated. Genes differentially expressed in hippocampus included those for 13 neurotransmitter proteins, 5 ion channel related proteins, 4 transcription factors, 3 neurotrophic factors, 1 cytokine, 1 apoptosis related protein, and 5 genes involved in synaptogenesis. Interestingly, GCs can have suppressive effects on brain BDNF mRNA transcription, one of the neurotrophic factors. These results indicate the diversity of targets affected by chronic exposure to corticosterone and highlight important regional differences in hippocampal neurobiology.