• 약학회지
• /
• 제38권3호
• /
• pp.250-264
• /
• 1994

Omeprazole(OMZ)-cholestyramine(CHL) and various OMZ-Dowex resin complexes were prepared by reaction between OMZ and activated resins in 0.1N NaOH solution. And their physical properties were tested by means of infrared(IR), differential scaning caloimeter(DSC), X-ray diffraction. Chemical stability of OMZ-CHL was increased markedly compared with OMZ and the decomposition of OMZ-CHL followed the pseudo first-order kinetics and the rate constants were $2.743{\times}10^{-4}/day$ at $20^{\circ}C$, $7.83{\times}10^{-3}day^{-1}$ under 80% RH and $1.68{\times}10^{-2}day^{-1}$ under UV radiation, respectively. On the other hand, the rate constants of OMZ were $2.996{\times}10^{-4}day^{-1}$ at $20^{\circ}C$, $1.17{\times}10^{-2}day^{-1}$ under 85% RH, and $4.07{\times}10^{-2}day^{-1}$ under UV radiation, respectively. The rates of dissolution of OMZ-CHL bulk and OMZ-CHL tablet were 100% and more than 85% in 15 minutes, respectively, which were increased than OMZ base and OMZ-tablet. In the acute toxicological test, the value of oral $LD_{50}$(mouse) was 4.608 g/kg. OMZ-CHL was pelletized using lactose, polyethyle neglycol(PEG), D-sorbitol, Avicel PH 101, sodium laurylsulfate and polyvinylpyrrolidone(PVP) K-30, and enteric coated with HPMCP, Myvacet, acetone, ethanol and cetanol, of which dissolution rate was found to be more than 85% in 10 minutes. From the above results, it was found that OMZ-CHL is a useful means for development of new oral dosage forms of OMZ.

• 한국식품영양과학회지
• /
• 제24권6호
• /
• pp.964-969
• /
• 1995

섬유성 biomass의 효율적인 이용을 위하여 CMCase, avicelase 분비력이 높은 균주(A. wentii MAW-598)와 ${\beta}-glucosidase$ (A. niger MAN-831) 분비력이 우수한 균주의 포자를 이용한 원형질세 형성.재생조건 및 융합을 실시하였다. 원형질체 형성 및 재생의 최적조건은 5일 성숙한 포자를 $30\mu\textrm{g}/ml$ 농도의 2-DG로 4시간 전배양하여 0.7M KCI 삼투압 안정제, novozyme(7.5mg/ml)+driselase(2.5mg/ml) 혼합효소로 5시간 반응시키는 것이 효과적이었다. 원형질체 융합 조건은 $CaCl_2$ 15mM, 25% PEG 4000, pH 5-7, $36^{\circ}C$에서 25~30분간 처리하였을때 효과적이었으며, 융합빈도는 $7.94\;{\times}\;10^{-4}$로 나타났다. FA-208 융합주는 친주에 비하여 각각 1.5, 1.3, 1.2배 효소활성의 증가를 나타내었다.

• 공업화학
• /
• 제20권2호
• /
• pp.172-176
• /
• 2009

Solder resist ink와 회로표면과의 밀착력 향상을 위해 사용되는 soft etching 제의 기본 조성으로 과산화수소와 황산을 선정하고 inhibitor, 계면활성제, 안정제를 첨가하여 에칭 속도 $0.7{\sim}1{\mu}m/min$, 표면조도(Ra)값 $0.5{\sim}0.6{\mu}m$을 만족시키는 soft etching 제 개발을 위한 연구를 하였다. Inhibitor로는 butyl amine, cyclohexyl amine, 5-aminotetrazole (5-Azol)을 첨가하였으며 계면활성제로는 polyethylene glycol (PEG), polyethylene imine (PEI), piperidine을 안정제로는 butyl alcohol, isopropanol, 인산을 첨가하여 각각의 첨가제가 에칭 속도 및 표면조도에 미치는 영향을 비교 분석하였다. 본 연구 결과 과산화수소 3% 황산 4%에 5-Azol 500 ppm, PEI 600 ppm, 인산 10 ppm 첨가 시 $0.7~1{\mu}m/min$을 만족시키는 에칭속도와 가장 좋은 표면조도를 갖는 것을 확인하였으며 solder test 결과 solder resist ink의 들뜸 현상이 발생하지 않는 것을 확인하였다.

• 한국작물학회지
• /
• 제43권3호
• /
• pp.194-198
• /
• 1998

An experiment was carried out to find out the priming effects of rice seeds, Oryza sativa L. (cv. Ilpumbyeo) on. the seedling establishment and early emergence under excess soil moisture conditions. Seeds were primed by soaking in -0.6 MPa polyethylene glycol (PEG) solution at $25^{\circ}C$ for 4 days. The primed seeds were sown in soils with various soil moistures (60, 80, 100, 120, and 140% field capacity) at 17 and $25^{\circ}C$, respectively. Germination and emergence rates, plumule height, and radicle length of primed seeds were higher than those of untreated seeds at any soil moisture and temperature examined. The time from planting to 50% germination ($T_{50}$) of primed seeds was less than that of untreated seeds by 0.9～3.7 days. Germination rate, emergence rate, plumule height, and radicle length were highest at the soil moisture of 80% field capacity among the soil moistures. Priming effects of rice seeds on germination and emergence rates were more prominent under the unfavorable soil moistures (60, 100, 120, and 140% field capacity) than those under the optimum soil moisture condition (80% field capacity). However, priming effects on seedling growth were greater at near optimum soil moisture compared with too lower or higher soil moistures. Therefore, these findings suggest that priming of rice seeds may be a useful way for better seedling establishment under the adverse soil conditions.

• 생명과학회지
• /
• 제14권2호
• /
• pp.368-373
• /
• 2004

광범위 제초제인 Bast $a^{(R)}$에 대해 저항성을 가지는 형질전환체 벼를 개발하였다. Bar유전자를 함유하고 있는 플라스미드 pCaMV35S::Bar를 embryogenic 현탁 배양체로부터 분리한 벼의 원형질체에 도입하였다. Phosphinotricin에 대해 저항성을 가지는 형질전환체 식물체들이 재분화되었고, 이들을 15 mg/l phosphinotricin이 함유한 배지에서 다시 선별하였다. 형질전환체 벼에서 bar유전자의 삽입과 발현을 Southern과 Northern blot분석으로 확인하였고, 또한 $R_1$ 형질전환 식물체들을 PAT 활성 assay로 재차 유전자 발현을 확인하였다. Bar 유전자는 다음 세대인 $R_1$ 식물체에서 3:1 멘델 유전 양상을 나타내었고, 형질전환체 $R_1$과 $R_2$ 식물체들은 fieild에서 살포되는 제초제 양만큼 Bast $a^{(R)}$ 를 살포했을 때 제초제 저항성을 나타내었다..

• Archives of Pharmacal Research
• /
• 제26권12호
• /
• pp.1002-1008
• /
• 2003

Ferulic acid (3-methoxy, 4-hydroxy cinnamic acid) is a flavoid component possessing antioxidant property. The compound is currently under development as a new drug candidate for the treatment of the dementia. The objective of this preformulation study was to determine the physicochemical properties of ferulic acid. The n-octanol to water partition coefficients of ferulic acid were 0.375 and 0.489 at the pHs of 3 and 10, respectively. Accelerated stability study for ferulic acid indicated that the t 90 value for the drug was estimated to be 459 days at $25^{\circ}C$. Ferulic acid was also found to be unstable under the relative humidity of more than 76%, probably because of the hygroscopic nature of the drug. In order to study compatibility of ferulic acid with typical excipients, potential change in differential scanning calorimetry spectrum was studied in 1: 1 binary mixtures of ferulic acid and typical pharmaceutical excipients (e.g., Aerosil, Avicel, CMC, Eudragit, lactose, PEG, PVP, starch and talc). Avicel, CMC, PVP and starch were found to be incompatible with ferulic acid, indicating the addition of these excipients may complicate the manufacturing of the formulation for the drug. Particle size distribution of ferulic acid powder was in the size range of 10-190 $\mu$m with the mean particle size of 61 $\mu$m. The flowability of ferulic acid was apparently inadequate, indicating the granulation may be necessary for the processing of the drug to solid dosage forms. Two polymorphic forms were obtained by recrystallization from various solvents used in formulation. New polymorphic form of ferulic acid, Form II, was obtained by recrystallization from 1,4-dioxane. The equilibrium solubility for Form I was approximately twice of that for Form II. The dissolution rate of Form II was higher than that of Form I in the early phase (<6 min). Therefore, these physicochemical information has to be taken in the consideration for the formulation of ferulic acid.

• 한국균학회지
• /
• 제17권4호
• /
• pp.209-213
• /
• 1989

사철 느타리 버섯 Uracil 요구성 균주를 Aspergillus nidulans ans 1과 Neurospora crassa pyr 4 유전자를 지닌 백터를 이용하여 형질전환시켰다. 사철 느타리버섯 ura 요구성 균주의 원형질체를 pyr 4 유전자를 지닌 백터 pDJB3과 혼합 후 PEG와 $CaCl_2$를 처리하였다. 형질전환 균주는 버섯 최소배지에서 안정되게 생육하였고 southern hybridization 결과도 백터 DNA가 사철 느타리 염색체에 삽입되었다. 형질전환 균주는 단핵성이므로 다른 단핵 균사와 균사 융합 후 자실체 형태, 포자형성 등을 조사하였다. 형질전환이 안된 균주는 톱니형 자실체를 형성한데 비해 형질전환된 균주는 톱니형, 깔대기형, 우산형, 갓 미발육형의 자실체를 형성하였다.

• KSBB Journal
• /
• 제18권4호
• /
• pp.289-293
• /
• 2003

독소루비신 고 생산성 산업균주인 BR-Dox의 충분한 양의 세포를 얻어내기 위해 R2YE 배지를 사용하였으며, 방선균의 포자형성이 잘 일어나는 R2YE 배지의 각 성분별로 첨가한 결과, CaCO$_3$를 첨가하였을 때 인위적인 원형질체 유도에 적합한 양의 세포를 얻어낼 수 있었다. 독소루비신 생합성 능력이 향상된 균주를 선별하기 위해 BR-Dox를 배양하여 세포를 인위적으로 원형질체로 유도하여 세포벽을 재생시킨 결과, 특이적으로 독소루비신 색소로 추정되는 붉은 색을 많이 내는 콜로니를 선별하여 정성 및 정량분석을 수행하였다. 선별된 파생균주 BR-Dox4와 BR-Dox6의 경우 TLC 정성분석 및 HPLC 정량분석 결과, BR-Dox에 비해 각각 25.2%, 12.2%의 생산성이 향상되었다. 본 연구결과는 인위적 원형질체 도입과 세포벽 재생을 통한 새로운 개념의 방선균 균주개량 방법을 제시하고, 이를 이용한 독소루비신 고생산성 균주개발의 가능성을 제시하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.43-49
• /
• 1998

The availability of large quantities of waste woods provides an impetus for investigating woody biomass potential uses. Polyurethane (PU) foams are prepared with reacting isocyanates and polyols, and are used. in various industry fields. Thus, lignocellulosic waste raw-materials are proposed as replacement for synthetic polyol to PU foam formulation. In this study PU foams were manufactured from liquefied woods, methanediisocyanate(MDI), catalyst, foaming stabilizer, and viscosity aids. The polyol content, isocyanate.hydroxyl group (NCO/OH) ratio, and water content were varied to evaluate their effects on the foaming and water absorption of the PU foams. Less than 400 Molecular weight. of polyethylene glycol(PEG) and 1 to 3 solvent to woody raw-material ratio were desirable for liquefying woody materials. Liquefying rate was increased with more than 3 % addition of inorganic and organic catalysts and raising reaction temperature more than $150^{\circ}C$. Addition of starch enhanced liquefying of woody materials. Fourty percents of starch resulted in about 90% liquefying rates. Foaming rates were increased with increasing moisture contents of liquefied wood. Moisture contents of 0.6% resulted in 5 time-foaming rates, and seven percents of moisture contents more than 30 time-foaming rates. But, an increase in water content may result in a decrease in cross-links between wood polyol and isocyanate, because the NCO/OH ratio is constant. Increasing moisture contents have significantly decreased density of PU foams. The optimum water content should be about 2.5% or less in this adopted condition.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.30.1-30.7
• /
• 2020

Background: Dental studies of precocious puberty have focused on examination of jaw and dentition growth. The aim of the study was to analyze the relationship between precocious puberty and maxillary dental developmental abnormalities (DDAs). Methods: This retrospective study was conducted on the Korean patients in whom dental panoramic and hand-wrist radiographs had been taken before they were 15 years of age. The maxillary DDAs were assessed as mesiodens, congenital missing teeth, peg-shape lateral incisors, or impacted teeth. The chronological ages of the control group members were within the normal range of the hand-wrist bone age. Others with a peak luteinizing hormone of ≥ 5 and < 5 IU/L were allocated to central precocious puberty (CPP) and peripheral precocious puberty (PPP), respectively. Results: Of the enrolled 270 patients, 195, 52, and 23 were allocated to the control, CPP, and PPP groups, respectively. The maxillary DDAs were significantly more prevalent in the CPP group than in the other groups. Among those with maxillary DDA, the mesiodens predominated. Age- and sex-adjusted multivariate analysis revealed maxillary DDA (odds ratio, 3.36; 95% CI, 1.60-7.05) and especially mesiodens (odds ratio, 5.52; CI, 2.29-13.28) to be significantly associated with CPP. Conclusions: Maxillary DDAs were significantly more prevalent in the CPP group than in the PPP or control groups. Among the many types of maxillary DDAs, mesiodens was significantly associated with CPP and may be considered a predictor of the development of CPP.