• Conservation Science in Museum
• /
• v.2
• /
• pp.19-25
• /
• 2000

In order to studies proper conservation treatment condition of waterlogged archaeological wood excavated from wetland in Shinchang-dong, Kwangju, 2 kinds of wooden objects were treated with PEG(Poly-Ethylene Glycol), sucrose and lactitol and their size stability and relative humidity were analyzed and compared each other. The result showed that Quercus spp. had the highest size stability in 2 Step-PEG treatment using PEG#200(MW:200) and PEG#4000 (MW:3,350) and Acer spp. was the highest in treatment using only PEG#4000. In relative humidity test after treatment 2 Step-PEG treatment showed the lowest size stability. In the meantime, sucrose and lactitol-treated sample was fast for penetration, sucrose-treated sample showed a sharp increase for penetration in as high as 84% humidity condition and medicine flew out a lot and lactitol-treated sample got enlarged with fine cracking(splitting) in relative humidity test. In relative humidity test, the samples showed cracking(splitting) in all treatment materials except for 2 Step-PEG treatment. This study showed that waterlogged archaeological wood excavated from Shinchang-dong had the highest size stability and highest adaptation to humidity change in case of treatment with 2 Step-PEG.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.27-32
• /
• 2002

We investigated the effect of polyethylene glycol(PEG) treatment of preservative treated green japanese cedar(Cryptomeria japonica) round posts on their preservative penetration and check formation during the air drying. The round rods were dip-treated in 10% preservative solution of Basilit CFK for 1 day, followed by application(3, 5, and 10 times) with 50% PEG-400 solution, and then dried for 30 days under natural conditions. The rate of preservative penetration into sapwood was a low by 23.2% without PEG treatment, whereas that was a high by about 51.2~64.5% with PEG treatment. From these results, it was assumed that PEG played an affirmative role in the penetration of preservative components loaded onto the surface of round rods by dipping. During the air drying, the formation of drying checks decreased significantly with increasing application times of PEG. Even though some drying checks in PEG treated rods were developed, the number and size of checks was reduced remarkably by PEG treatment. After 2 months of outdoor exposure, PEG treatment failed to reduce checking in preservative-treated rods whereas finishing of polyurethane resin lacquer after PEG treatment was significantly effective in preventing check development.

• Korean Journal of Veterinary Research
• /
• v.60 no.3
• /
• pp.145-153
• /
• 2020

This study aimed to evaluate the effects of a bioabsorbable bone hemostatic agent comprising poly (ethylene glycol-propylene glycol) copolymers (PEG-PPG) on hemostasis and osteogenesis. Bilateral 3 mm diameter calvarial defects were created in 99 male Sprague-Dawley rats. The defects were filled with PEG-PPG or bone wax. The defects of control group were left unfilled. Virtual autopsy was performed to evaluate bioabsorption. The calvaria were subjected to x-ray microtomography (microCT) and histological examination. Bone volume fraction (BV/TV) and bone mineral density (BMD) were measured using microCT; furthermore, white blood cell count and histological examination were performed. After application of PEG-PPG and bone wax, immediate hemostasis was achieved. Autopsy revealed that PEG-PPG disappeared within 48 h at the application site; in contrast, bone wax remained until 12 weeks. The PEG-PPG and control groups showed significantly more osteogenesis than the bone wax group with respect to BV/TV and BMD at 3, 6, and 12 weeks (p < 0.05). Histology revealed that the bone wax group exhibited little bone formation with inflammation. In contrast, PEG-PPG and control groups showed significantly more qualitative osteogenesis than the bone wax group (p < 0.01). In conclusion, PEG-PPG showed immediate hemostasis and was absorbed to allow progressive osteogenesis.

• KSBB Journal
• /
• v.9 no.3
• /
• pp.279-286
• /
• 1994

A mathematical model has been derived and used to describe phosphoprotein partitioning in Fe(III) IDA-PEG/dextran two-phase systems. This model includes the inhibitory effects of hydrogen and hydroxyl ion concentrations on protein partitioning. For aqueous two-phase partitioning experiments, the Al and A2 subcomponents of ovalbumin carrying two and one surface phosphoryl group(s) were purified using an immobilized metal ion affinity chromatography (IMAC). The ratio of partition coefficients in the presence and absence of Fe(III)IDA-PEG, K/Ko, increased in the pH range of 3.0 to 5.0 due to deprotonation of the second oxygen of the phosphoryl group, and above pH 5.0 declined steeply by the inhibitory binding of hydroxyl ions to the metal ion. This partitioning behavior was well described by the mathematical model. The binding constants for formation of the complex between the phosphoryl group and the Fe(III)IDA-PEG were found to be $6.1{\times}10^3M^{-1} and 2.3{\times}10^4M^{-1}$ in the top and bottom phases, respectively. These values are 3-5 times those for interaction of Cu(II)IDA-PEG with a single surface-accessible histidine.

• Journal of Biomedical Engineering Research
• /
• v.17 no.3
• /
• pp.291-296
• /
• 1996

Poly(ethylene glycol)(PEG) macromers terminated with diacrylate Iyoups and interpenetrating poly- mer networks(IPN) composed of poly(hydroxyethyl methacrylate)(PHEMA) or poly(hydroxyethyl methacrylate-co-hydronypropyl methacrylate-co- N-vinyl pyrrolidone ) [ P( HEM A-co- HPM A-co- NVP) ] and PEG macromer were synthesized with the aim of obtaining protein adsorption resistant soft contact lens. Polymerization of PEC macromer resulted in the formation of cross-linked gels due to the multifunctionality of macromer. Crosslinked P(HEMA) or P(HEMA-co-HPMA-co-WVP) chains were interpenetrated into the cross-linked three-dimensional networks of PEG. It was found that albumin adsorption onto the contact lens prepared by P(HEMA-co-HPMA-co-NVP) /PEG IPW decreases with an increase of molecular weight of PEG. Also, it was found that albumin adsorption onto the both contact lens decreases with an increase of concentration of PEC macromer in the IPN preparation. There are also more adequate in the bioinertnen for the contact lens by P(HEMA)/PEG IPN or P (HEMA-co-HPMA-co-NVP)/PEG IPN than that by P(HEMA) or P(HEMA-co-HPMA-co-NVP)

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.2
• /
• pp.69-79
• /
• 1994

The conventional machine vision system which has uniform rectangular grid requires tremendous amount of computation for processing and analysing an image especially in 2-D image transfermations such as scaling, rotation and 3-D reconvery problem typical in robot application environment. In this study, the imaging system with nonuiformly distributed image sensors simulating human visual system, referred to as Ploar Exponential Grid(PEG), is compared with the existing conventional uniform rectangular grid system in terms of image resolution and computational complexity. By mimicking the geometric structure of the PEG sensor cell, we obtained PEG-like images using computer simulation. With the images obtained from the simulation, image resolution of the two systems are compared and some basic image processing tasks such as image scaling and rotation are implemented based on the PEG sensor system to examine its performance. Furthermore Fourier transform of PEG image is described and implemented in image analysis point of view. Also, the range and heading-angle measurement errors usually encountered in 3-D coordinates recovery with stereo camera system are claculated based on the PEG sensor system and compared with those obtained from the uniform rectangular grid system. In fact, the PEC imaging system not only reduces the computational requirements but also has scale and rotational invariance property in Fourier spectrum. Hence the PEG system has more suitable image coordinate system for image scaling, rotation, and image recognition problem. The range and heading-angle measurement errors with PEG system are less than those of uniform rectangular rectangular grid system in practical measurement range.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.4
• /
• pp.329-344
• /
• 1997

To improve germination and growth of forages of hill pasture seeds of several forages were osmotically primed with polyethylene glycol (PEG) under different PEG concentrations, treatment periods, and temperatures. Seeds were coated with several materials, and tested for germination. The best primed or coated seeds in germination tests were surface sow on hilly area. The results obtained are summarized as follows; 1. Osmotic priming with PEG accelerated germination of forages and reduced time taken for germination. 2. Germinability was best when the seeds of Tama ryegrass or orchardgrass were treated for 6-9 days at 30g PEG1100 ml water, red clover or white clover for 3, or 9 days in 20g PEG1100 ml water at $10^{\circ}C$. 3. Priming seeds of Tama ryegrass or orchardgrass in 30% PEG solution for 6 days, and seeds of red clover or white clover in 20% PEG solution for 6 days at $15^{\circ}C$ were most effective in germination, similar to priming at $10^{\circ}C$ . 4. Priming seeds of Tama ryegrass at 15C, and orchardgrass, red clover, or white clover at $10^{\circ}C$ were effective in germination than priming at other temperatures. 5. Osmotic priming with PEG accelerated germination of forages compared to coated seeds in Petri-dishes, while coated seeds germinated more slowly, but showed better emergence and superior growth to those of primed or intact seeds in the field. 6. Priming seeds increased yield slightly, and coating seeds significantly increased its yield on hilly area.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.294-301
• /
• 2013

Polymersomes made of biodegradable triblock copolymers based on poly(fumaric acid-co-sebacoyl chloride)/PEG (PEG-co-P(FA/SC)-co-PEG) were prepared and studied in aqueous solutions. TEM confirmed the formation of vesicles in aqueous media. Aggregation behavior of the copolymers was studied by fluorescence spectroscopy of 8-anilino-1-naphthalenesulfonic acid, and the critical aggregation concentration (c.a.c.) of the copolymer was found to be ${\sim}26.2{\mu}M$ indicating desirable stability of the vesicles. Dynamic light scattering revealed that the size of the vesicles was distributed within the range of 170-270 nm. Turbidity measurements confirmed the relative short-term stability of the polymersomes. Carboxyfluorescein, a hydrophilic compound, was simply encapsulated in the vesicles during polymersome preparation. The release of encapsulant from the polymersomes at 25 and $37^{\circ}C$ lasted about 3 weeks, and the rate of release followed a first-order kinetics. The release is speculated to be primarily carried out through diffusion. These results confirm that these polymersomes are promising as controlled-release carriers of various drugs.

• KSBB Journal
• /
• v.5 no.2
• /
• pp.95-100
• /
• 1990

Ethanol fermentations of inulin by K.fraglis in aqueous two-phase system of PEG/Dextran were performed not only to investigate the characteristics of partition of ethanol, sugar, and cell in the upper phase and the bottom phase but also to compare the fermentation properties with those of single phase system. In the range of 1 to 3 wt% of Dextran, ethanol fermentability and ethanol productivity reduced according to the increase of the molecular weight of PEG. But the cell yield and the cell productivity showed the opposite trend. In the region of 6 to 10 wt% of PEG, the increase of the concentration of PEG, caused the minute decrease of ethanol productivity but the remarkable augmentation of cell productivity. According to the increase of the molecular weight of PEG, the partition coefficient of inulin slightly decreased. But with the increment of the concentration of Dextran, the partition coefficient and the partition yield of inulin in the bottom Phase represented the trends of increase.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.84-90
• /
• 2009

Nitinol alloy (TiNi) has been widely used in vascular stents. To improve the blood compatibility of Nitinol alloy, its surface was chemically modified in this study. Nitinol was first coated with gold, then chemisorbed with L-cysteine (C/N), and followed by grafting of zwitter ionic poly(ethylene glycol) (PEG) (PEG-$N^+-SO_3{^-}$) to produce TiNi-C/N-PEG-N-S. The zwitter ionic PEG grafted on the Nitinol surface was identified by ATR-FTIR, ESCA and SEM. The hydrophilized surface was proven by the decrease of water contact angle. In addition, from the blood compatibility tests such as protein adsorption, platelet adhesion, and blood coagulation time, the surface-modified TiNi alloy exhibited a better blood compatibility as compared to the untreated Nitinol control. These results indicated a feasibility of synergistic effect of hydrophilic PEG and antithrombotic zwitter ion.