• 제목/요약/키워드: Peeling damage

검색결과 35건 처리시간 0.025초

세계문화유산 조선왕릉 석조문화재의 재질특성 및 풍화양상 연구 - 구리 동구릉을 중심으로 - (A Study on the Material Characteristics and Weathering Aspects of Sculpture Stone Around the World Cultural Heritage Joseon Dynasty Royal Tombs - Focused on the East Nine Royal Tombs -)

  • 조하진 ;채승아 ;송진욱 ;이명성 ;이태종
    • 헤리티지:역사와 과학
    • /
    • 제55권4호
    • /
    • pp.180-193
    • /
    • 2022
  • 동구릉은 세계문화유산인 조선왕릉의 대표적인 곳으로, 봉분과 관계된 석조물 979점과 능과 봉분 주위에 석물, 석인상, 석수 등 310점으로 총 1,289점(일부 능의 지대석 제외)이 배치되어 있다. 동구릉 내 석조물은 대부분 흑운모화강암으로 구성되어 있지만 일부 능에서는 담홍색화강암으로 구성되어 있다. 전암대자율 측정결과 천장한 현릉(왕후)을 제외한 건원릉부터 목릉까지 범위 및 평균값이 유사하여, 동일한 채석지에서 산출된 돌을 사용한 것으로 판단된다. 숭릉, 수릉, 경릉의 경우 대자율 범위가 넓게 분포하는데, 조성 당시 석조물과 능을 옮기는 과정에서 새롭게 제작된 석조물이 섞이거나, 채석산지가 다른 석재를 사용하였기 때문이라 판단된다. 보존상태 조사결과 봉분부재와 능상 석조물 모두 표면풍화 중 박리박락과 입상분해에 의한 손상비율이 가장 높았으며, 표면변색의 경우 봉분부재는 황색과 토사, 능상 석조물은 황색, 흑색, 토사 등 복합적인 변색이 확인된다. 생물영향은 동구릉 내 손상양상 중 주된 요인으로 상대적으로 4~5등급 점유율이 높게 확인되었다. 이는 왕릉의 환경이 생물이 정착할 수 있는 토양형성이 용이하고 지속적으로 수분을 얻을 수 있는 조건이 갖춰져 있기 때문이라 판단된다. 구조상태의 경우 비교적 양호한 상태를 보이고 있다. 각 능별 종합훼손등급을 산출한 결과 전체적으로 양호한 상태를 보이고 있으나 이른 시기에 조성된 건원릉과 현릉의 경우 상대적으로 높은 풍화등급을 보였다. 동구릉 내 석조물은 표면풍화로 인해 부재 조각이나 문양 등 상당부분이 손실되었으며 2차 손상이 진행 중이다. 또한 각각의 손상요인이 단독적으로 발생하기보다는 복합적으로 작용하여 다양한 손상이 지속적으로 진행되고 있다. 따라서 왕릉 석조물의 보존처리뿐만 아니라 처리 이후에도 효율적인 관리를 위한 석조물의 정기적 보존현황관리와 자료 확보가 필요하며, 구체적인 관리 매뉴얼과 시스템이 갖춰져야 한다. 이번 연구는 세계문화유산 동구릉 내 석조물의 보존현황을 조사하고 체계적으로 분류하여 보존처리의 우선순위 및 필요성을 제공하였을 뿐만 아니라 향후 동구릉 보존관리 방안을 수립하는데 기초자료로 활용할 수 있을 것으로 판단된다.

대장균과 녹농균에 대항하는 황금과 황련 및 살리실산 조성물의 항균상승효과 (Synergic Antimicrobial Activity of Scutellariae Radix, Coptidis Rhizoma and Salicylic Acid Combination against Escherichia coli and Pseudomonas aeruginosa)

  • 김수영;김지현;유강열;이현서;전인화;강현주;이정노;최병민;장선일
    • 동의생리병리학회지
    • /
    • 제28권4호
    • /
    • pp.390-395
    • /
    • 2014
  • Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Listeria. monocytogenes and Bacillus cereus are pathogenic bacteria that should not be detected in cosmetics and foodstuffs. Therefore, we first investigated the antimicrobial activities of extracts of Scutellariae Radix(SR), Coptidis Rhizoma (CR) and salicylic acid(SA) in these pathogenic microorganisms. Although SA has been known to exhibit anti-inflammation and antimicrobial activity against pathogenic microorganisms, a high concentration of SA may cause serious side effects such as skin redness, skin burning, peeling or tissue damage. Hence, we focused on diminishing side effects followed by treatment of a high concentration of SA and investigated whether the combinations of SA with various concentrations(25-400 mg/mL), SR and CR with a concentration(100 mg/mL) which did not show antimicrobial activity against E. coli and P. aeruginosa exhibited meaningful antimicrobial effect against both strains. In our results, the combinations of SA with the lowest concentration(25 mg/mL), SR(100 mg/mL) and CR(100 mg/mL) exhibited significant antimicrobial activity against E.coli in comparison to SA alone(25 mg/mL) showing no antimicrobial activity. Moreover, the combinations of SA (100 mg/mL), SR and CR showed seven times higher antimicrobial activity against E. coli than SA alone(100 mg/mL) and exhibited a significant antimicrobial activity in comparison to ampicilin (p<0.05). The combinations of SA(100 mg/mL), SR and CR showed two times higher antimicrobial activity against P. aeruginosa than SA alone. Therefore, these results indicated that the combinations of SR, CR and SA with low concentration expressed the synergistic antimicrobial effect against E. coli and P. aeruginosa and showed great potential as an antimicrobial agent.

Research on the Multi-electrode Plasma Discharge for the Large Area PECVD Processing

  • Lee, Yun-Seong;You, Dae-Ho;Seol, You-Bin
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.478-478
    • /
    • 2012
  • Recently, there are many researches in order to increase the deposition rate (D/R) and improve film uniformity and quality in the deposition of microcrystalline silicon thin film. These two factors are the most important issues in the fabrication of the thin film solar cell, and for the purpose of that, several process conditions, including the large area electrode (more than 1.1 X 1.3 (m2)), higher pressure (1 ~ 10 (Torr)), and very high frequency regime (VHF, 40 ~ 100 (MHz)), have been needed. But, in the case of large-area capacitively coupled discharges (CCP) driven at frequencies higher than the usual RF (13.56 (MHz)) frequency, the standing wave and skin effects should be the critical problems for obtaining the good plasma uniformity, and the ion damage on the thin film layer due to the high voltage between the substrate and the bulk plasma might cause the defects which degrade the film quality. In this study, we will propose the new concept of the large-area multi-electrode (a new multi-electrode concept for the large-area plasma source), which consists of a series of electrodes and grounds arranged by turns. The experimental results with this new electrode showed the processing performances of high D/R (1 ~ 2 (nm/sec)), controllable crystallinity (~70% and controllable), and good uniformity (less than 10%) at the conditions of the relatively high frequency of 40 MHz in the large-area electrode of 280 X 540 mm2. And, we also observed the SEM images of the deposited thin film at the conditions of peeling, normal microcrystalline, and powder formation, and discussed the mechanisms of the crystal formation and voids generation in the film in order to try the enhancement of the film quality compared to the cases of normal VHF capacitive discharges. Also, we will discuss the relation between the processing parameters (including gap length between electrode and substrate, operating pressure) and the processing results (D/R and crystallinity) with the process condition map for ${\mu}c$-Si:H formation at a fixed input power and gas flow rate. Finally, we will discuss the potential of the multi-electrode of the 3.5G-class large-area plasma processing (650 X 550 (mm2) to the possibility of the expansion of the new electrode concept to 8G class large-area plasma processing and the additional issues in order to improve the process efficiency.

  • PDF

청풍부원군 김우명 상여의 보존 및 복제 (Conservation and Reproduction of Cheongpung Buwongun Kim Wumyeong's Funeral Bier)

  • 정재웅;허일권;박승원;이용희
    • 박물관보존과학
    • /
    • 제14권
    • /
    • pp.91-113
    • /
    • 2013
  • 국립춘천박물관 소장 중요민속문화재 제 120호 청풍부원군 김우명 상여는 상여와 요여, 명정대, 만장대 등 1습으로 구성되었다. 2002년 기증되었으며(고(故) 김성구) 현존하는 최고(最古)의 왕실 제작 상여로 가치가 높게 평가되고 있다. 2012년 9월 '강원의 위대한 문화유산' 특별전시를 위하여 수장고에서 휴식기를 갖고 있던 상여를 점검한 결과 목재 부분의 채색 안료층이 박락될 우려가 있고, 직물류의 표면 손상이 심각하다고 판단하여 보존처리를 실시하였다. 이 중 매듭과 수식(垂飾)은 손상이 더 심해 전시가 불가능하므로 정밀조사에 따라 복제품을 제작하였다. 상여는 기본가구를 제외한 모든 부위가 분리된 상태였으며, 요여는 부재를 해체하여 보강한 후 재조립하였다. 상여의 목재 부분은 채색 안료층을 강화하기 위하여 Acryl 계열 수지인 Paraloid B-72 2 wt%(in ethyl acetate)를 도포한 후, 알긴산나트륨(Sodium alginate) 2 wt%(in 증류수)와 아교 4 wt%(in 증류수)를 혼합하여 사용하였다. 직물류는 표면 오염물을 제거한(Vacuuming) 후 구김을 폈다(Steaming). 지용성 오염의 경우 비이온 계면활성제(Saponin, 0.25 ~ 0.5 g/l, in 증류수)를 사용하여 제거하였다. 요여는 해체 후 부러졌던 부재를 아교 3 wt%(in 증류수, 초벌용)와 35 wt%(in 증류수, 접착용)로 접착하고 결실부 복원을 위해 건조한 소나무를 사용하였다. 운각의 연결은 본래의 금속제 경첩과 장석못을 재사용하여 조립을 완료하였다.

고성 삼덕리유적 출토 적색마연토기의 제작 특성 연구 (Resarch on Manufacturing Technology of Red-Burnished Pottery Excavated from Samdeok-ri, Goseong, Korea)

  • 한이현;김수경;진홍주;장성윤
    • 헤리티지:역사와 과학
    • /
    • 제53권4호
    • /
    • pp.170-187
    • /
    • 2020
  • 고성 삼덕리유적에서는 청동기시대 후기의 묘역식 지석묘와 석관묘가 발굴되었으며 적색마연토기, 석촉, 석검 등의 부장품이 출토되었다. 고성 삼덕리유적에서 출토된 적색마연토기는 약 50~160㎛ 두께의 안료층이 남아 있으나 대다수의 토기 표면에서 안료층의 박리, 박락현상이 관찰되었다. 적색마연토기의 태토는 중립의 석영, 장석, 각섬석 등으로 구성되어 있으며 부분적으로 철산화물의 불투명 광물도 확인되었다. 6호 석관묘에서 출토된 적색마연토기는 비짐으로 각섬석, 장석이 다량 포함되어 있어 다른 무덤에 부장된 적색마연토기와 차이를 보였다. 적색 안료는 태토와 유사한 광물 조성을 보이고 있으나 적철석(hematite)이 상당량 함유되어 있고, 미립의 석영, 장석, 각섬석 등이 관찰되었다. 광물 조성으로 볼 때 소성 온도는 900℃ 내외였을 것으로 추정된다. 삼덕리 일대 3km 이내에는 장석과 각섬석이 우세한 섬록암과 화강섬록암이 노출된 지역이 확인되므로 이 일대에서 토기 제작을 위한 원료를 채취하였을 가능성이 높다. 적색마연토기는 성형 후 안료를 물에 풀어서 토기 전면에 채색한 후 마연 기법으로 마무리한 것으로 판단된다. 태토와 안료층의 소결 상태를 고려할 때 채색 후 소성하였던 것으로 생각되며 '성형-반건조-채색-마연'의 과정을 거친 후 소성되었을 것으로 추정된다. 다만 토기에 도포하는 안료의 농도, 채색 시점과 방법에 따라 적색마연토기의 표면과 단면 상태가 다르게 나타나는 것으로 확인되었다. 대부분의 삼덕리유적 토기들은 안료층과 태토층이 뚜렷하게 구분되었으나 안료가 태토층에 스며들어가 안료와 태토가 뚜렷이 구분되지 않는 토기편도 관찰되었다. 이는 미립질의 안료가 묽은 농도로 도포되었거나 성형 직후 도포되었기 때문으로 보인다. 또한 대부분의 적색마연토기에서는 안료층의 박락과 마모현상이 관찰되었고 안료층이 일부만 잔존하는 경우도 많았다. 이는 안료를 도포하고 마연 처리한 토기에서 마모에 의한 손상이 더 쉽게 발생한다고 보고되고 있어 삼덕리유적 적색마연토기도 매장 환경에서 풍화에 의해 마모와 박락이 진행된 것으로 생각되며, 매장주체부 출토품보다 고분 외곽에 뿌려진 잔편에서 이러한 손상이 가속화되어 나타났다.