• Journal of Trauma and Injury
• /
• v.25 no.4
• /
• pp.296-299
• /
• 2012

The aorta is the most common major thoracic artery injured by blunt chest trauma. Injuries to major aortic arch branch arteries can also occur but are much less common than aortic injuries in the setting of blunt trauma. Although internal mammary artery (IMA) injury is uncommon and rarely diagnosed in cases of blunt chest trauma, it is one of the important sources of bleeding in chest trauma. IMA bleeding can cause ongoing blood loss and may lead to serious conditions such as extensive hemothorax, anterior mediastinal hematoma or its catastrophic complication, cardiac tamponade. However such arotic and branch artery injuries are not easily detected by plain radiograph, and are detected indirectly because of associated mediastinal hematoma. Herein, we report a case of IMA injury caused by blunt chest trauma secondary to pedestrian traffic accident. The injured patient was successfully treated by transcatheter arterial embolization (TAE).

• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.23-34
• /
• 2011

Recently, carelessness on safety management in construction sites has caused a sharper upward trend in accidents and disasters, compared to the past. Therefore, this study analyzes the causes of accidents that occurred on construction sites in the year of 2010, and proposes preventive measures. The construction industry had a heavy death rate with 279 out of 418 deaths from falls in all industrial sites, accounting for 66.7%. And the causation analysis found a particularly high incidence of temporary structure-related accidents, with falling off scaffolding as the most common cause of accidents. According to the causation analysis of fall-down accident cases, accidents induced by protrusion on construction sites are a big contributor resulting in the deaths of 312, accounting for 74.8%, which is deemed to be due to site disorderliness. And to remove floor protrusions and to secure workers' traffic line and safety, neat and thorough site arrangement is necessary. Against collision, efforts must be made to prevent equipment-pedestrian crashes on site, which necessarily requires emergency lamps, alarm bells, and safety poles and blocks to be installed, lighting systems to be improved, obstacles to be removed, site supervisors to be assigned to construction equipment works, and workers to be more intensely trained and supervised.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2220-2227
• /
• 2008

The safety equipments of railway level crossing which are installed at intersections between roads and railway lines prevent level crossing accidents by informing all of the vehicles and pedestrians of approaching trains. The intelligent safety system for level crossing which employs information and communication technology has been developed in USA and Japan, etc. But, in Korea, the relevant research has not been performed. In this paper, we analyze the cause of railway level crossing accidents and the inherent problem of the existing safety equipments. Based on analyzed results, we design the intelligent safety system which prevent collision between a train and a vehicle. This system displays train approaching information in real-time at roadside warning devices, informs approaching train of the detected obstacle in crossing areas, and is interconnected with traffic signal to empty the crossing area before train comes. Especially, we present the video based obstacle detection algorithm and verify its performance with prototype H/W since the abrupt obstacles in crossing areas are the main cause of level crossing accidents. We identify that the presented scheme detects both pedestrian and vehicle with good performance.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.7-13
• /
• 2012

Recently, carelessness on safety management in construction sites has caused a sharper upward trend in accidents and disasters, compared to the past. Therefore, this study analyzes the causes of accidents that occurred on construction sites in the year of 2007, and proposes preventive measures. The construction industry had a heavy death rate with 279 out of 418 deaths from falls in all industrial sites, accounting for 66.7%. And the causation analysis found a particularly high incidence of temporary structure-related accidents, with falling off scaffolding as the most common cause of accidents. According to the causation analysis of fall-down accident cases, accidents induced by protrusion on construction sites are a big contributor resulting in the deaths of 312, accounting for 74.8%, which is deemed to be due to site disorderliness. And to remove floor protrusions and to secure workers' traffic line and safety, neat and thorough site arrangement is necessary. Against collision, efforts must be made to prevent equipment-pedestrian crashes on site, which necessarily requires emergency lamps, alarm bells, and safety poles and blocks to be installed, lighting systems to be improved, obstacles to be removed, site supervisors to be assigned to construction equipment works, and workers to be more intensely trained and supervised.

• Journal of KIBIM
• /
• v.6 no.3
• /
• pp.42-48
• /
• 2016

Structural members are designed to maintain the load-carrying capacity as well as structural strength, and the structural serviceability such as the deflection, cracks, and vibration to give the occupants uncomfortable environment should be checked. Recently, the importance of the vibration has been issued since the Techno Mart accident due to vibration resonance. This study provides a passive vibration control system using the repulsion force of magnets to reduce dynamic vibrations. The systems is devised by importing the constraint condition by a hinge to operate magnets installed at two adjacent locations. The effectiveness of the proposed system is investigated by the vibration control test of a steel beam with and without the control system. It is illustrated in the test that the system is activated by the control forces executed by the magnets and can be utilized in reducing the dynamic responses. The system can be applied to pedestrian bridge and traffic bridge. The applicability is expected in the future by optimizing the factors to affect the dynamic responses like the intensity, mass, locations of magnets.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.97-104
• /
• 2016

In Korea, the number of crash accident victims per 100,000 population is three times higher than the average of OECD. In particular, 60% of it occurs on the community road. Thus, this study intends to analyze the causes of such accidents through a pedestrian and vehicle traffic survey. The purpose is to establish practical safety enhancement measures for community roads. In recent years, lots of changes have occurred in the pedestrian environment. A traffic survey shows that 65% of pedestrians walk on the right and 17% of people use smart-phones while walking. An eye camera experiment shows that the operation load of drivers on the community roads is more than 4 times higher than those in urban roads. According to a speed survey, 62% of vehicles drive at 30km/h or above. The characteristics of accidents on community roads are as follows. First, the ratio of accidents on the edge of the road is 2.3 times as high as those on other roads. Second, when people walk on the right, the ratio of accidents is 2.5 times as high as that of walking on the left. Third, it becomes more dangerous when people cross the road from the right to the left. The majority of accidents is caused by unsafe driving (84.4%). When a vehicle makes a left turn, the likelihood of accidents is 2.3 times as high as those caused by a right turn. The ratio of accidents caused by vehicles going backwards is 14% among all accidents. In community roads, the focus of drivers should be at least 4 times higher than those on urban roads. Thus, walking in the opposite direction of vehicles and careless behaviors are highly likely lead to accidents.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.54-62
• /
• 2010

The scientific analysis of car-pedestrian accidents is not an easy task because of the characteristic of the accidents itself. Since the analysis involved human being, there were few experimental data that could be used for the analysis. The coefficient of friction of human body was the one of crucial data for accident analysis, but no field experiment report was available for various roadway conditions. This study intends to measure the coefficient of friction of human body through field studies. Results showed that the coefficient of friction of human body for dry asphalt pavement conditions was 0.59~0.62, and for dry concrete pavement conditions was 0.59~0.61. In addition, the coefficients for wet asphalt pavement and for wet concrete pavement conditions were 0.56~0.59 and 0.51~0.54 respectively, indicating 5.0% and 8.3% reduction compared to the dry conditions. The deduced coefficients were validated using the simulation program. It has been confirmed that the experiment values were close to the simulation results.

• Journal of Trauma and Injury
• /
• v.31 no.3
• /
• pp.151-158
• /
• 2018

Purpose: The regional emergency medical centers manage the patients with major blunt trauma according to the process appropriate to each hospital rather than standardized protocol of the major trauma centers. The primary purpose of this study is to evaluate the effectiveness and influence on prognosis of additional cervical-thoracic-lumbar-spine computed tomography (CTL-spine CT) scan in diagnosis of spinal injury from the victim of major blunt trauma with impaired consciousness. Methods: The study included patients visited the urban emergency medical center with major blunt trauma who were over 18 years of age from January 2013 to December 2016. Data were collected from retrospective review of medical records. Sensitivity, specificity, positive predictive value, and negative predictive value were measured for evaluation of the performance of diagnostic methods. Results: One hundred patients with Glasgow coma scale ${\leq}13$ underwent additional CTL-spine CT scan. Mechanism of injury was in the following order: driver, pedestrian traffic accident, fall and passenger accident. Thirty-one patients were diagnosed of spinal injury, six of them underwent surgical management. The sensitivity of chest, abdomen and pelvis CT (CAP CT) was 72%, specificity 97%, false positive rate 3%, false negative rate 28% and diagnostic accuracy 87%. Eleven patients were not diagnosed of spinal injury with CAP CT and C-spine lateral view, but all of them were diagnosed of stable fractures. Conclusions: C-spine CT scan be actively considered in the initial examination process. When CAP CT scan is performed in major blunt trauma patients with impaired consciousness, CTL-spine CT scan or simple spinal radiography has no significant effect on the prognosis of the patient and can be performed if necessary.

• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.25-31
• /
• 2021

Moving toward an aged society, traffic accidents involving elderly drivers have also attracted broader public attention. A rapid increase of senior involvement in crashes calls for developing appropriate crash-severity prediction models specific to senior drivers. In that regard, this study leverages machine learning (ML) algorithms so as to predict the severity of vehicle-pedestrian collisions induced by elderly drivers. Specifically, four ML algorithms (i.e., Logistic model, K-nearest Neighbor (KNN), Random Forest (RF), and Support Vector Machine (SVM)) have been developed and compared. Our results show that Logistic model and SVM have outperformed their rivals in terms of the overall prediction accuracy, while precision measure exhibits in favor of RF. We also clarify that driver education and technology development would be effective countermeasures against severity risks of senior driver-induced collisions. These allow us to support informed decision making for policymakers to enhance public safety.

• Korean Journal of Health Education and Promotion
• /
• v.19 no.1
• /
• pp.87-107
• /
• 2002

Recently, the industrialized world is suffering from accidents referring from the lack of safety consciousness. According to Korean Safety Regulation Department(1996), students at junior high schools are mostly involved in safety accidents, and this is due to lack of safety consciousness. To prevent these accidents, we need to have safety consciousness and attitude. To make junior high school students who are mostly affected in these accidents act safely, they need to know their level of safety consciousness. The purpose of this study is to develop a guideline of measuring the scale of safety consciousness and analyze the relationship between safety education, accident experiences and safety consciousness. This study is based on a survey of 708 junior high students in Seoul, which was carried out from 12 November, 2001 to 21 November, 2001. 1. The main fields of safety consciousness are home safety, school safety, fire safety, emergency management based on documents. Home safety is again divided into facility safety and livelihood safety, school safety is divided into facility safety, livelihood safety and laboratory safety, traffic safety is divided into pedestrian safety, bicycling safety and public transportation safety, fire safety divided into prevention and escaping during fire breakouts, emergency management safety is divided into general principles and escaping during emergency situations. 2. The primary safety consciousness scale was made according to every field of safety consciousness. A preliminary examination based on the scale and a study of reliance and the factors was held. Based on these results, 27 questions which were concerned to be impairing reliability or lacking in factor were deleted on the secondary safety consciousness scale development The secondary safety consciousness scale which constituted of 73 questions was put into another preliminary study and after analyzing reliability and the factors, 12 questions of low reliabilities were deleted and with these results, the third scale were made consisting of 61 questions. 3. A study based on the third safety scale which is made of 61 questions, were held and with a analysis of the reliability and factors made, the relationship between safety education, accident experience and safety mind were examined. (1) The study of reliability and factors show that Cronbach's coefficient in home safety fields is .7598, in school safety .7924, in traffic safety .8306, in emergency treatment .7775, in fire safety .7247. The questions indicating low reliability were deleted. The factor analysis revealed that home safety is converged on facility safety and livelihood safety. But one question was deleted because it showed incongruence of validity. School safety was converged on facility safety, livelihood safety and laboratory safety. But 2 questions showed incongruence of validity and these were deleted. Traffic safety fields were converged on pedestrian safety, bicycle safety and public transportation safety. One question showing incongruence of validity was deleted. Emergency treatment fields converged on general principles and acting in emergency situations and three questions showing incongruence of validity were deleted. Fire safety was converged on prevention and acting in fire breakouts. Totally, eight questions were removed and the final scale were consisted of 53 questions (2) The 3/sup rd/ grade students scored higher average safety mind scales than 1st graders(p〈.05). And students who had high scores at school tend to have a higher scale than those who do not(p〈.001). (3) Average scale of students who had experience in safety education were higher(p〈.001). Students who had previously been involved in home safety accidents had a low score(p〈.001). This was same to students with experience in school safety accidents(p〈.001). Students with traffic safety accidents and fire safety accidents tend to have a lower scale too(p〈.05, p〈.001).