• 반도체디스플레이기술학회지
• /
• 제22권2호
• /
• pp.112-119
• /
• 2023

In urban environments, signals of Global Positioning System (GPS) can be blocked and reflected by tall buildings, large vehicles, and complex components of road network. Therefore, the performance of the positioning system using the GPS module in urban areas can be degraded due to the loss of GPS signals necessary for the position estimation. To deal with this issue, various localization schemes using inertial measurement unit (IMU) sensors, such as gyroscope and accelerometer, and Bayesian filters, such as Kalman filter (KF) and particle filter (PF), have been designed to enhance the performance of the GPS-based positioning system. Among Bayesian filters, the PF has been widely used for the target tracking and vehicle navigation, since it can provide superior performance in estimating the state of a dynamic system under nonlinear/non-Gaussian circumstance. This paper presents a positioning system that uses the double-stacked particle filter (DSPF) as well as the accelerometer, gyroscope, and GPS receiver on the smartphone to provide higher pedestrian positioning accuracy in urban environments. The DSPF employs a nonparametric technique (Parzen-window) to create the multimodal target distribution that approximates the posterior distribution. Experimental results show that the DSPF-based positioning system can provide the significant improvement of the pedestrian position estimation in urban environments.

• 반도체디스플레이기술학회지
• /
• 제22권2호
• /
• pp.50-55
• /
• 2023

Due to the unavailability of global positioning system (GPS) indoors, various indoor pedestrian positioning methods have been designed to estimate the position of the user using received signal strength (RSS) measurements from radio beacons, such as wireless fidelity (WiFi) access points and Bluetooth low energy (BLE) beacons. In indoor environments, radio-frequency (RF) signals are unpredictable and change over space and time because of multipath associated with reflection and refraction, shadow fading caused by obstacles, and interference among different devices using the same frequencies. Therefore, the outliers in the positional information obtained from the indoor positioning method based on RSS measurements occur often. For this reason, the performance of the positioning method can be degraded by the characteristics of the RF signal. To resolve this issue, a map-matching (MM) algorithm based on maximum probability (MP) estimation is applied to the indoor positioning method in this study. The MM algorithm locates the aberrant position of the user estimated by the positioning method within the limits of the adjacent pedestrian passages. Empirical experiments show that the positioning method can achieve higher positioning accuracy by leveraging the MM algorithm.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권1호
• /
• pp.35-44
• /
• 2022

In this paper, a dual foot (DF)-PDR system is proposed for the fusion of integration (IA)-based PDR systems independently applied on both shoes. The horizontal positions of the two shoes estimated from each PDR system are fused based on a particle filter. The proposed method bounds the position error even if the walking time increases without an additional sensor. The distribution of particles is a non-Gaussian distribution to express the lateral error due to systematic drift. Assuming that the shoe position is the pedestrian position, the multi-modal position distribution can be fused into one using the Gaussian sum. The fused pedestrian position is used as a measurement of each particle filter so that the position error is corrected. As a result, experimental results show that position of pedestrians can be effectively estimated by using only the inertial sensors attached to both shoes.

• 반도체디스플레이기술학회지
• /
• 제23권1호
• /
• pp.71-78
• /
• 2024

In indoor environments, since global positioning system (GPS) signals can be blocked by obstacles, such as building structure. the performance of GPS-based positioning methods can be degraded because of the loss of GPS signals. To solve this problem, various localization schemes using inertial measurement unit (IMU) sensors, such as gyroscope, accelerometer, and magnetometer, have been proposed to enhance the positioning accuracy in indoor environments. IMU-based positioning methods can estimate the location of the user by calculating the velocity and heading angle of the user without the help of GPS. However, low-cost MEMS IMUs may lead to drift error and large bias. In addition, positioning errors in IMU-based positioning approaches can be caused by the irrelevant motion of the pedestrian. In this study, we propose an enhanced indoor positioning method that provides more reliable localization results by using the camera, light detection and right (LiDAR), and ARKit framework on the iPhone. Through reliable positioning results and augmented reality (AR) experiences, our indoor positioning system can provide indoor space guidance services.

• 제어로봇시스템학회논문지
• /
• 제14권11호
• /
• pp.1189-1195
• /
• 2008

We introduce a MEMS-based pedestrian dead reckoning (PDR) system. A walking navigation algorithm for pedestrians is presented and map-matching algorithm for the navigation system based on dead reckoning (DR) is proposed. The PDR is equipped on the human body and provides the position information of pedestrians. And this is able to be used in ubiquitous sensor network (USN), U-hearth monitoring system, virtual reality (VR) and etc. The PDR detects a step using a novel technique and simultaneously estimates step length. Also an azimuth of the pedestrian is calculated using a fluxgate which is the one of magnetometers. Map-matching algorithm can be formulated to integrate the positioning data with the digital road network data. Map-matching algorithm not only enables the physical location to be identified from navigation system but also improves the positioning accuracy. However most of map-matching algorithms which are developed previously are for the car navigation system (CNS). Therefore they are not appropriate to implement to pedestrian navigation system based on DR system. In this paper, we propose walking navigation system and map-matching algorithm for PDR.

• 디지털융복합연구
• /
• 제11권4호
• /
• pp.243-249
• /
• 2013

본 논문에서는 GPS(Global Positioning System)를 사용할 수 있는 실외와 GPS(Global Positioning System)를 사용할 수 없는 실내에서 Wi-Fi(Wireless Fidelity)를 이용한 안드로이드 기반의 위치 정보 시스템을 설계 및 구현하였다. 보행자의 위치를 실내에서 추정하기 위해서는, 보행자의 위치에 상관없이 절대위치를 구하는 것이 필요하고, 보행자의 움직임에 따라서 상대위치를 연속적으로 추정하는 것이 필요하다. 보행자의 초기위치를 추정하기 위해서 Wi-Fi fingerprinting을 사용하였다. 기존의 Wi-Fi fingerprinting에서 가장 위치 오차가 작은 WKNN(Weighted K Nearest Neighbor) 알고리즘의 단점을 보완한 EWKNN(Enhanced Weighted K Nearest Neighbor) 알고리즘을 사용해 위치의 정확도를 높였다. 그리고 보행자의 상대위치를 추정하기 위해서는, 스마트폰에 탑재되어 있는 IMU(Inertial Measurement Unit)를 사용하였기 때문에 추가적인 장비가 필요하지 않았다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제8권1호
• /
• pp.27-32
• /
• 2016

The global positioning system (GPS)-enabled mobile phones provide location-based applications such as car and pedestrian navigation services. The pedestrian navigation services provide safe and comfortable route and path guidance for pedestrians and handicapped or elderly people. One of the essential components for a navigation system is a spatial database used to perform navigation and routing functions. In this paper, we develop modeling and categorization of pedestrian path components for smart tour guide services using the mobile pedestrian navigation application. We create pedestrian networks using 2D base map and sky view map in urban area. We also construct pedestrian networks and attributes of node, link, and POI using on-site GPS data and photos for smart pedestrian tour guide in the major walking tourist spots in Jeju.

• Journal of information and communication convergence engineering
• /
• 제19권3호
• /
• pp.188-197
• /
• 2021

In military operations, an accurate localization system is required to navigate soldiers to their destinations, even in non-GPS environments. The global positioning system is a commonly used localization method, but it is difficult to maintain the robustness of GPS-based localization against jamming of signals. In addition, GPS-based localization cannot provide important terrain information such as obstacles. With the widespread use of embedded sensors, sensor-based pedestrian tracking schemes have become an attractive option. However, because of noisy sensor readings, pedestrian tracking systems using motion sensors have a major drawback in that errors in the estimated displacement accumulate over time. We present a group-based standalone system that creates terrain maps automatically while also locating soldiers in mountainous terrain. The system estimates landmarks using inertial sensors and utilizes split group information to improve the robustness of map construction. The evaluation shows that our system successfully corrected and combined the drift error of the system localization without infrastructure.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권2호
• /
• pp.117-124
• /
• 2020

In this paper, the symmetric position drift of the integration approach in pedestrian dead reckoning (PDR) system with dual foot-mounted IMU is analyzed. The PDR system that uses the inertial sensor attached to the shoe is called the IA-based PDR system. Since this system is designed based on the inertial navigation system (INS), it has the same characteristics as the error of the INS, then zero-velocity update (ZUPT) is used to correct this error. However, an error that cannot be compensated perfectly by ZUPT exists, and the trend of the position error is the symmetric direction along the side of the shoe(left, right foot) with the IMU attached. The symmetric position error along the side of the shoe gradually increases with walking. In this paper, we analyze the causes of symmetric position drift and show the results. It suggests the possibility of factors other than the error factors that are generally considered in the PDR system based on the integration approach.

• 한국정보통신학회논문지
• /
• 제22권2호
• /
• pp.302-313
• /
• 2018

스마트 기기의 생활화와 증강현실 활용 증가로 실내 위치 인식 시스템의 수요가 급증함에 따라, BLE(Bluetooth Lower Energy) 비콘 그리고 UWB(Ultra Wide Band) 등을 이용한 실내 측위 시스템이 개발되고 있다. 본 논문에서는 BLE Beacon을 기반으로 RSSI(Received Signal Strength Indicator)를 이용한 삼변측량(Trilateration) 기법을 사용하여 측위 플레이트(Plate)를 생성한다. 이에 IMU(Inertial Measurement Unit) 센서의 방향, 속도, 이동거리 등의 데이터를 이용하여 PDR(Pedestrian Dead Reckoning) 측위 좌표를 산출하여 정확도를 보정한다. 또, BLE 비콘(Beacon)의 RSSI를 적용한 플레이트(Plate) 기법과 PDR 기법이 융합된 정밀 실내 측위 알고리즘을 제안한다. 본 논문에서 제시한 알고리즘을 실제 대형 실내 경기장과 공항에 BLE 비콘을 설치, 실험하여 평균 2.2m 의 오차로 65%의 정확도가 개선됨을 검증하였다.