• KIEAE Journal
• /
• v.16 no.1
• /
• pp.11-19
• /
• 2016

Purpose: PMV, PET, and similar thermal comfort indices and microclimate modeling have recently become actively used to evaluate thermal comfort. This study will look at pedestrian roads with diverse spatial characteristics on university campus using the ENVI-met model as the base for onsite measurement. Method: The PET was used as the thermal comfort index. The first microclimate measures were collected on September 20, 2014, and the second microclimate measures were collected on June 1, 2015. The ENVI-met model was used at the same time. Result: As a results, Onsite measurement results differed depending on the PET spatial characteristics. The location associated with the most discomfort had a PET of $47.8^{\circ}C$. The spatial characteristics of this place included a with no shade. The most comfortable location had shade, and the PET was $24.6^{\circ}C$. When the ENVI-met model and onsite measurements were compared, similar patterns were found, but with a few differences at specific points; this was due to the limitation of using input materials such as trees, buildings, and covering materials with the ENVI-met model. This factor must be thoroughly considered when analyzing modeling results.

• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.131-138
• /
• 2013

PURPOSES : The intents of the study are to identify the accident factors and to demonstrate the potentials of tobit model as a tool to study the number of accidents on arterial roads segments. METHODS : This paper uses a tobit regression as a methodology to analyze the factors affecting the number of accidents. In pursuing the above goal, this study gives particular attentions to analyzing the data of 2,446 accidents (1,610 in major arterial roads and 836 in minor arterial roads) occurred on arterial roads in 2007 to 2010. RESULTS : First, 3 accident models which were classified by total arterial roads, major arterial roads and minor arterial roads, and were all statistically significant were developed. Second, the exclusive right-turn lane as common variable, and the number of accident, traffic volume, number of lanes, link length, rate of median, number of entrances, number of pedestrian crossings, number of curves, number of bus stops and exclusive left-turn as specific variables of the models were selected. Finally, the paired sample t-test could not be rejected the null hypotheses of three types of models. CONCLUSIONS : Using data from vehicle accidents on arterial roads, the estimation results show that many factors related to roadway geometrics and traffic characteristics significantly affect to the number of accidents.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.11 no.1
• /
• pp.21-33
• /
• 2009

The agricultural tourism is something that urban people can have an experience of the traditional culture and knowledge of the agriculture, so that it result the improvement of the agricultural profit and keep the special agricultural system. Recently, the demand of the agricultural tourism was increasing, but it was not really enough today that the practice of the tourism for essential farm experience or physical plan. The experiments were practiced by a land in Sucheong-li, Namjong-myun, Gwangju-si, Gyeonggi-do which provides the program for the basic plan and management of the experiential farm, so it shows a developmental model of that typical farm. The basic design of developmental model was formed by the analysis of the natural, civilized and visual environments. The site plan for the experiential farm was composed of a parking lot, public facilities, resting place, experiential site, sports facilities and pedestrian space. There was an examination that the activation of experiential farm should change the concept of the big production or labor-focused farm from a tourism-focused form.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.26-49
• /
• 2018

The purpose of this study was to verify the reliability of the solar radiation model and discuss its applicability to the urban area of Seoul for summer heat stress mitigation. We extended the study area closer to the city scale and enhanced the spatial resolution sufficiently to determine pedestrian-level urban radiance. The domain was a $4km^2$ residential area with high-rise building sites. Radiance modelling (SOLWEIG) was performed with LiDAR (Light Detection and Ranging)-based detailed geomorphological land cover shape. The radiance model was evaluated using surface energy balance (SEB) observations. The model showed the highest accuracy on a clear day in summer. When the mean radiation temperature (MRT) was simulated, the highest value was for a low-rise building area and road surface with a low shadow effect. On the other hand, for high-rise buildings and vegetated areas, the effect of shadows was large and showed a relatively low value of mean radiation temperature. The method proposed in this study exhibits high reliability for the management of heat stress in urban areas at pedestrian height. It is applicable for many urban micro-climate management functions related to natural and artificial urban settings; for example, when a new urban infrastructure is planned.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.415-423
• /
• 2021

Citizen participation and Living Lab are attracting interest as one of the major strategies for the success of smart cities. In a Living Lab, citizens, who are the end-users of technology, participate in the search for alternatives to define and solve problems and repeat experiments to verify alternatives in a circular process. The purpose of this research was to present an operating model of a citizen-participating online community platform to improve urban problems, implement and test it, and show its applicability. To this end, an operation model of a citizen-participating online community platform was proposed to improve urban problems. An online platform was designed and implemented to reflect the functions pursued by the operation model. Finally, a pilot test for the function was performed using the Oma Elementary School case located in Ilsan, Goyang-si, Gyeonggi-do. The operating model was designed with the city's pedestrian environment and children. As a result, the sharing and communicating process of urban issues among community members worked appropriately according to the designed intention. The Living Lab coordinator could visualize and view urban issues posted by users on a map based on location information. Visualizing the urban problem as a heat map confirmed that urban problems were concentrated in a specific area.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.17-26
• /
• 2007

Because the prime objective of the current preemption methods at signalized intersections near highway-railroad grade crossings(IHRGCs) is to clear the crossing, secondary objectives such as safe pedestrian crossing time and minimized delay often are given less consideration or are ignored completely during the preemption. Under certain circumstances state-of-the-practice traffic signal preemption strategies may cause serious pedestrian safety and efficiency problems at IHRGCs. An improved transition preemption strategy(ITPS) that is specifically designed to improve intersection performance while maintaining or improving the current level of safety was developed by Cho and Rilett. Even if the new transition preemption strategy improved both the safety and efficiency of IHRGCs, the performance of the strategy is affected by train speed. Understanding the impact of this factor is essential in order to implement ITPS. In this paper, the effects of train speed were analyzed using a VISSIM simulation model which was calibrated to field conditions. It was concluded that the delay is affected more by train speed than the transitional preemption strategy and the safety of the intersection is not affected by train speed once an advanced preemption warning time(APWT) is equal to or greater than 90 seconds.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.96-106
• /
• 2014

Necessarily traffic policies have been biased in car than pedestrian, so pedestrian's environment is getting worse. Result of this situation our accident rate is high as 36.4%, compared to OECD member countries with average rate of 17.8%(in 2009). Increasing interest for pedestrians environment improvement, and it make an effort to build environment to guarantee walk and safety of pedestrians. Analysis on the binary logistic regression(BLR) was used. The dependent variable is occurring from the road width of less than 9m accident, and independent variable extracted can be obtained from the traffic accident data. Traffic accident on roads having width of less than 9 meters affecting variables is when the driver is straight, when the driver is female, when the pedestrian is walk driveway, and so on. To prevent it, efforts is demanded to protect handicapped, to build safe pedestrians environment using C-ITS and to decrease speed of going straight vehicle on roads having width of less than 9 meters.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.143-155
• /
• 2016

Recently, a massive loss of life and property is occurring in Korea due to traffic accidents, with the rapid increase in cars. For improvement of traffic safety, the Korea Transportation Safety Authority intensively analyzes accident data in local governments with low traffic safety index, performs a field investigation to extract problems and offers local governments improvements for problems, by conducting the 'Special Survey of Actual Conditions of Traffic Safety' each year, starting 2008. But local governments cannot strongly push forward the improvement projects due to the limited budget and the uncertainty of the improvement plan effects. Therefore, this study suggested a model which applied the Utility concept to the AHP theory, in order to efficiently decide a priority of the improvement plans in accident black spots in consideration of the limited budget of local governments. The number of accidents in each spot for improvement and accident severity, traffic volume, pedestrian volume, the improvement project cost and the accident reduction effect were chosen as evaluation factors for deciding a priority, and data about the improvement plan costs and the accident reduction effects, traffic accidents and traffic volume in the spots to undergo the special research on the real condition of traffic accident in the past were collected from the existing studies. Then, regression analysis was carried out and the Utility Curve of each evaluation factor was computed. Based on the AHP analysis findings, this study devised a priority decision method which calculated the weight and the utility function of each evaluation factor and compared the total utility values. The AHP analysis findings showed that among the evaluation factors, accident severity had the biggest importance and it was followed by the improvement plan cost, the number of accidents, the improvement effect, traffic volume and pedestrian volume. The calculated utility function shows a rise in utility, as the variables of the 5 evaluation factors; the number of accidents, accident severity, the improvement plan effect, traffic volume and pedestrian volume increase and a fall in utility, as the variables of the improvement plan cost increase, since the improvement plan cost is included in the budget spent by a local government.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.210-218
• /
• 2019

Recently, cable-stayed bridges have been attempting to apply bold and experimental shapes for aesthetic and originality. In the case of bridges that have no similar cases, deep understanding and verification of analytical modeling is needed. S-shaped curved pedestrian cable-stayed bridge is always twisted because the cable is arranged on one side of the inverted triangular truss girder. In order to suppress the torsion, the Link-shoes are arranged at the left and right top members with reference to the Bearing placed at the mid-bottom member. The first research is related to the modeling method of Link-Shoe and Diaphram. In order to accurately reflect the transverse structural system and the torsional stiffness, it was necessary to model the Link-Shoe and the Diaphram directly rather than indirectly using the stiffness of the Bearing. The second study is related to the lateral arrangement of Bearing and Link-Shoes. Method 1 is to place in order of Link-shoe, Bearing, and Link-shoe from outside the curve radius. Method 2 is place to in order of Bearing, Bearing, and Link-shoe. In method 2, compared to method 1, the stress in the outer top member was larger and the stress in the inner one was decreased. It is analyzed that the stress adjustment is possible according to the lateral arrangement of Bearing and Link-Shoe.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.1
• /
• pp.14-26
• /
• 2019

For bus drivers' safe driving, a policy that analyzes the causes of the drivers' traffic accidents and then assists their safe driving is required. Therefore, the Ministry of Land, Infrastructure and Transport set up its plan to gradually expand the equipping of commercial vehicles with FCWS (Forward Collision Warning System) and LDWS(Lane Departure Warning System), from the driver-supporting ADAS(Advanced Driver Assistance Systems). However, there is not much basic research on the analysis of bus drivers' traffic accidents in Korea. As such, the time is appropriate to research what is the most necessary ADAS for bus drivers going forward to prevent bus accidents. The purpose of this research is to analyze how serious the accidents were in the different bus routes and whether the accidents were repetitive, and to give recommendations on how to support ADAS for buses, as an improvement. A model of ordered logit was used to analyze how serious the accidents were and as a result, vehicle to pedestrian accidents which directly affected individuals were statistically significant in all of the models, and violations of regulations, such as speeding, traffic signal violation and violation of safeguards for passengers, were indicated in common in several models. Therefore, the pedestrian-sensor system and automatic emergency control device for pedestrian should be installed to reduce bus accidents directly affecting persons in the future, and education for drivers and ADAS are to be offered to reduce the violations of regulations.