• 제목/요약/키워드: Pearlescent substrate

검색결과 7건 처리시간 0.023초

광 간섭 펄 안료의 신규 제조 공정 개발 (Development of Advanced Manufacturing Process of Light Interference Pearl Pigment)

  • 손홍하;유재원;김경섭
    • 대한화장품학회지
    • /
    • 제41권2호
    • /
    • pp.121-126
    • /
    • 2015
  • 일반적으로 진주광택안료(pearlescent pigment)라고 하는 광학적 특성을 나타내는 분체는 진주광택, 무지개 빛, 금속광택느낌을 주기 위해서 이용되는 광학적 효과를 갖는 안료이다. 현재 사용되고 있는 화장품용 진주광택 안료는 1965년 듀퐁사에 의해 개발된 이산화티탄 피복 운모 기판 안료의 형태가 주류를 이루고 있으며, 강한 광택과 선명한 간섭색상을 위하여 평활하고 깨끗한 표면의 기판(substrate)을 이용하는 경우나 기판 위에 단층이 아닌, 2 ~ 3 가지 성분을 광학적 설계에 의해 다양한 두께로 적층하여 기존의 단층 코팅 보다는 두께는 두껍지만 기존보다 우수한 광택과 채도가 높은 간섭색을 구현한 광간섭 분체도 화장품에 적용되고 있다. 본 연구에서는 강한 광택과 선명한 간섭색상을 위하여 두께를 두껍게 하지 않으면서 광 반사율과 간섭현상에 의한 색상의 채도가 높은 광 간섭 분체의 제조 방법에 대해 검토하고, 그 방법으로서 피복되는 이산화티탄의 전구체를 변화시키고, 목적으로 하는 간섭색을 구현할 수 있는 이산화티탄의 피복량을 분할하여 코팅 및 열처리를 통해 결정화함으로써 일반적인 단층 코팅의 간섭광을 갖는 간섭펄보다 높은 광 반사율과 채도가 높은 간섭광을 나타내는 광 간섭 분체를 개발하고자 하였다. 이와 같은 제조방법을 통해 개발된 광 간섭 분체는 피복된 이산화티탄 입자(grain)의 크기가 균일하고 조밀하게 피복된 것을 전자 현미경으로 확인하였고, XRD 측정을 통한 결정화 정도를 비교한 결과 본 연구의 공정으로 제조한 진주 광택안료가 일반적인 단층 코팅 간섭 펄 안료보다 우수한 것을 확인하였으며, 광반사율과 간섭색상의 채도도 단층 일반적인 단층 코팅 간섭 펄 안료보다 높다는 것을 알 수 있었다.

금속산화물이 코팅된 마이카 티타니아 진주광택 안료의 제조 및 색차변화 (Preparation and Chrominance of Metal Oxide Coated Titania/Mica Pearlescent Pigment)

  • 이관식;강국현;이진희;이동규
    • 한국응용과학기술학회지
    • /
    • 제30권2호
    • /
    • pp.233-243
    • /
    • 2013
  • 무지개 빛을 내는 무기진주광택안료는, 내광성, 내용제성 및 내열성 등이 물리적 화학적 안정성이 우수하여 다양한 분야에서 응용되고 있다. 본 연구는 수열합성방법을 사용하여 마이카 티타니아에 파란색 코팅 안료인 염화코발트를 기본으로 화장품 안료로 사용되는 진주광택안료를 합성하였다. 코발트에 의한 안료의 색상을 보완하고자 코발트와 금속 염의 비를 달리하여 안료를 코팅하고, 이를 통해 금속염의 종류에 따라 다양한 색차값을 구현하는 진주광택 안료를 합성하였다. 코발트와 첨가된 금속 염 전구체의 조성비와, 금속 염의 종류에 따라 코팅 특성과 색상을 조절할 수 있었고, 안료의 다양한 색상변화 특성을 색차계를 통해 확인 하였다. 합성된 안료는 SPM, SEM, XRD, EDS 기기를 통해 특성을 분석하였다.

전이금속염 첨가에 의한 판상 α-Al2O3 결정체 제조 (Preparation of Flaky α-Al2O3 Crystals by Transition Metal Salts Addition)

  • 송효경;박병기;이정민
    • 한국세라믹학회지
    • /
    • 제42권6호
    • /
    • pp.384-390
    • /
    • 2005
  • [ ${\alpha}-Al_2O_3$ ] precursor was synthesised by sol-gel method using aluminum sulfate, sodium sulfate and sodium carbonate as law materials. The flaky ${\alpha}-Al_2O_3$ crystals were prepared by heating using precursor about $1,050^{\circ}C$. In this study, the effect of some transition-metal sulfate ($FeSO_4,\;SnSO_4,\;ZnSO_4$) addition have been investigated. When iron sulfate was added, it could see that act on impurities in crystal growth process. In case of tin sulfate, distribution of Platelets was very broad. When flaky ${\alpha}-Al_2O_3$ crystals were prepared zinc sulfate addition, thickness, size, and distribution of platelets was suited to industrial application. The average diameter of flaky ${\alpha}-Al_2O_3$ crystals was about 20 $\mu$m, and its thickness was about 0.3 $\mu$m. Increasing addition of zinc sulfate, thickness of ${\alpha}-Al_2O_3$ platelet was decreased.

황산티타늄의 첨가가 판상 α-Al2O3의 결정성장에 미치는 영향 (Effect of Titanium Sulfate Addition on Crystal Growth of the Flaky α-Al2O3)

  • 박병기;조선미;이정민
    • 한국세라믹학회지
    • /
    • 제42권5호
    • /
    • pp.338-345
    • /
    • 2005
  • To prepare the complex gel of flux and pseudo-boehmite used in precursor of the flaky ${\alpha}-A1_2O_3$ crystal, aqueous solution of the mixture of sodium carbonate and sodium phosphate was added with stirring in aqueous solution of the mixture of sodium sulfate, potassium sulfate and titanium sulfate. The complex gel was dried at $110^{\circ}C$ and was crystallized above $1,050^{\circ}C$, and then the effect of the amount of titanium sulfate on size, morphology, thickness and crystal size distribution of the flaky ${\alpha}-A1_2O_3$ crystal was investigated. Addition of titanium sulfate was prevented the aggregation and generation of twin crystal, and had an effect on the crystal size and the thickness during crystal growth. When the amount of titanium sulfate was more than 6 g, particle size was decreased but was free from crystal twining and aggregation. On the other hand, when the amount of titanium sulfate was lower than 6 g, crystal size was increased but crystal twinning and aggregation were noticed.

CVD법을 이용한 적색 인조진주 코팅 및 제조 (Preparation and Coating of Red Colored Artificial Pearl by CVD Method)

  • 신철우;최경림;이동규
    • 한국응용과학기술학회지
    • /
    • 제35권3호
    • /
    • pp.857-864
    • /
    • 2018
  • 현대인의 눈높이에 맞는 친환경적인 고급품질의 인조진주 제품개발이 세계의 악세사리 및 생활용품 시장에서 요구되고 있다. 본 연구는 고품질의 인조진주 제품을 경제적으로 대량생산하기 위한 방법으로 유기안료를 인조진주 제조용 친환경 무기안료로 대체하고 기존 제조 방식에서 사용하는 주재료였던 니트로셀룰로오스를 우레탄 바인더로 대체하여 광택도가 73.4%에서 86.7%로 증가하였으며 CVD 마감처리 후에는 96%의 높은 광택도를 가졌다. 색차분석 결과 CVD 코팅으로 인하여 빛의 간섭효과 때문에 a*와 b*값이 각각 +37.7에서 +31.9로, +24.5에서 +14.2로 감소하면서 다양한 색을 발현하여 영롱한 빛깔의 인조진주가 제조되었다. 마감 증착된 고품질의 인조진주의 내화학성, 광택도, 색차계, 표면 거칠기, 내마모성, 중금속함량검사, 염수분무테스트 등을 분석하여 품질향상 및 인체 무해성을 확인하였다.

황산알루미늄의 가수분해에 의해 석출된 AlO(OH) 겔의 숙성시간이 판상 α-Al2O3의 결정성장에 미치는 영향 (Effect of Aging Time of AlO(OH) Gel Precipitated by Hydrolysis of Aluminum Sulfate on Crystal Growth of the Flaky α-Al2O3)

  • 최동욱;박병기;서정권;이정민
    • 한국세라믹학회지
    • /
    • 제43권9호
    • /
    • pp.575-581
    • /
    • 2006
  • To precipitate the complex gel of flux and aluminum hydroxides gel, aqueous solution of the mixture of $Na_2CO_3\;and\;Na_2PO_4{\cdot}12H_2O$ was added with stirring in aqueous solution of the mixture of $Al_2(SO_4)_3{\cdot}14{\sim}18H_2O,\;Na_2SO_4$, and then the complex gel was aged in $0{\sim}30h\;at\;90^{\circ}C$. As aging time passed, the aluminum hydroxides was grown into the acicular AlO(OH) gel. Also, aging time had an effect on physical properties of the AlO(OH) gel and on crystal growth of the flaky ${\alpha}-Al_2O_3$ prepared by molten-salt precipitation. In this study, the complex gel was crystallized in temperature range of $400{\sim}1,200^{\circ}C$ after drying at $110^{\circ}C$, and then it was investigated to effect of aging time on precipitation temperature, size, thickness, morphology and particle size distribution of the flaky ${\alpha}-Al_2O_3$ crystal. As aging time passed, the flaky a${\alpha}-Al_2O_3$ crystal showed a tendency toward an increase in size and thickness as result from an increase in BET surface area and pore volume of the acicular AlO(OH) gel.

눈의 물리적인 특성과 유사한 펄 원료 개발 및 이를 이용한 화장료 조성물 제조방법 (Development of Pearl Pigment which Has the Similar Properties of Snow in Make-up Products)

  • 이윤하;김경남;선우건;;;최영진;고승용;한상훈;강학희;이옥섭
    • 대한화장품학회지
    • /
    • 제34권3호
    • /
    • pp.167-173
    • /
    • 2008
  • 화장품 분야에서 펄 안료는 다양하게 적용되어져 왔다. 지금까지 가장 대중적으로 사용된 펄 안료는 마이카 기재에 산화철이 코팅된 것이었지만, 최종 제품에 이와 같은 펄을 사용하게 될 경우 천연 마이카에 함유된 불순물로 인해 약간의 불투명한 노란 색상이 띄게 된다[1,2]. 본 연구는 눈과 같은 반짝임을 제공하는 펄 안료 개발에 초점을 맞췄고, 눈과 같은 효과는 펄 안료의 구조와 순도 등의 영향 때문인 것을 알게 되었다. 특히, 이번 펄 안료 개발은 유리 기재와 산화철을 코팅시켜 눈의 광학적인 값(refractive index)과 입자 크기(particle size)를 눈과 유사하게 개발하였고 이는 눈과 같이 화려한 반짝임(glittering) 효과를 구현할 수 있게 되었다. 그리고 메이크업 제품에 본 펄 안료를 적용하여 화려한 제품을 개발하게 되었다.